1 / 2
Fanatec Clubsport V1 Magnetic shifter upgrade — zdjęcie 1
1 / 2

Fanatec Clubsport V1 Magnetic shifter upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Piece to hold a single 10x5mm neodymium magnet per shifter. It requires 2 M3 screws to hold it to the Hub.

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
289
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution

Piece to hold a single 10x5mm neodymium magnet per shifter. It requires 2 M3 screws to hold it to the Hub.

It does not require to disassembly the hub.

It does not require glue to hold the magnet in place (I guess it will depend a bit on the magnet, not in my case)

I've added some double side tape (one side without removing the plastic, so it is not sticky with the paddle) between the paddle and the magnet to reduce the noise.

Tagi