1 / 7
ClubSport Pedals V3 Haptic Pedal Reactor Mount — zdjęcie 1
1 / 7

ClubSport Pedals V3 Haptic Pedal Reactor Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Brackets which allow you to mount SIMAGIC's Haptic Pedal Reactor to the Fanatec ClubSport Pedals V3.

Ocena
0 / 5
Polubienia
28
Pobrania
345
Wydruki
0
Wyświetlenia
2471
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

I have designed these parts to provide a mounting solution for the SIMAGIC P-HPR to the Fanatec ClubSport Pedals V3. There are two types of bracket, one which utilizes the SIMAGIC P2000 Haptic Module Bracket (included in a kit with some resellers), and another version which directly attaches the P-HPR to the Pedals. Also included is a model for mounting the SIMAGIC P2000 Haptic Control Box to the Pedals.

An M6x12mm heat set insert is used in each bracket to provide a mounting point to the pedals.

M6 cap nuts are inserted into each side of the bracket and attached with M6 screws. Both of these were supplied with the V3 pedal set.

These mounts should not interfere with the V3 Pedal Damper Kit sold by Fanatec. I don't have the kit though, so if you run into any issues, let me know and I can make modifications.

Rigidity is somewhat important for these mounts, so I recommend using stiff materials. PLA or ABS should work fine. I have attached my print settings for a Creality K1 using ABS. I printed at 0.12 mm layer heights to improve resolution and overhangs.

Tagi