1 / 2
Fanatec 8nm Powerbrick Mount for Playseat Challenge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mount/holder for the 8nm powerbrick for Fanatec CSL DD to place on the tubes of Playseat Challenge.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple mount/holder for the 8nm powerbrick for Fanatec CSL DD to place on the tubes of Playseat Challenge.
Use 25mm M3 bolt and nut to fasten to the tube. If you only have larger bolts you can probably drill it out and use those. There is plenty of material.
I made a small latch so you can open to get the cable through. There is also a small dimple where the rubber feet goes, so mind that when mounting the bracket.