1 / 2
StealthBurner + KNOMI 2 - Standard 22mm CPAP hose connector for Voron Trident — zdjęcie 1
1 / 2

StealthBurner + KNOMI 2 - Standard 22mm CPAP hose connector for Voron Trident

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Standard size 22mm CPAP hose attachment for StealthBurner with KNOMI 2 on Voron Trident

Ocena
0 / 5
Polubienia
8
Pobrania
48
Wydruki
0
Wyświetlenia
556
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I have a Voron Trident and wanted to add CPAP to my Stealthburner with KNOMI 2. I am using the most recent Stealthburner + KNOMI face with  CPAP that BTT released. I had some 22mm hose laying around and wanted to use it but everything is designed around the mini 15mm hose. I designed a few parts in order to adapt the posted models but kept running into problems with clearances on my Trident. As the gantry is on the top there isn't a lot of room for wires, reverse Bowden tubing, and CPAP hose. I was running into the LED diffusor strip in the front top extrusion and the extrusion itself when Y=0. So I went back to fusion and made a slight bend to the end of the snorkel and extended it a bit to clear these obstructions. I also didn't want to look at zip tie's and ugly hose terminations so I made an insert to go into the CPAP hose and a beauty ring to over and conceal all the ugly parts. Still a work in progress and very well may evolve.

Tagi