1 / 2
StealthBurner + KNOMI 2 - Standard 22mm CPAP hose connector for Voron Trident — image 1
1 / 2

StealthBurner + KNOMI 2 - Standard 22mm CPAP hose connector for Voron Trident

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Standard size 22mm CPAP hose attachment for StealthBurner with KNOMI 2 on Voron Trident

Rating
0 / 5
Likes
8
Downloads
48
Makes
0
Views
559
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I have a Voron Trident and wanted to add CPAP to my Stealthburner with KNOMI 2. I am using the most recent Stealthburner + KNOMI face with  CPAP that BTT released. I had some 22mm hose laying around and wanted to use it but everything is designed around the mini 15mm hose. I designed a few parts in order to adapt the posted models but kept running into problems with clearances on my Trident. As the gantry is on the top there isn't a lot of room for wires, reverse Bowden tubing, and CPAP hose. I was running into the LED diffusor strip in the front top extrusion and the extrusion itself when Y=0. So I went back to fusion and made a slight bend to the end of the snorkel and extended it a bit to clear these obstructions. I also didn't want to look at zip tie's and ugly hose terminations so I made an insert to go into the CPAP hose and a beauty ring to over and conceal all the ugly parts. Still a work in progress and very well may evolve.

Tags