CPAP Hose Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hook up a computer fan to a CPAP hose to help with drying. 40mm and 60mm fan adapters available
- Ocena
- 3,75 / 5
- Polubienia
- 35
- Pobrania
- 176
- Wydruki
- 1
- Wyświetlenia
- 1268
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
Edit 9/6/25 - added options for 60mm fans.
This model allows you to hook up a 40mm (or 60mm) fan to blow air through your CPAP hose to help dry it out.
Hose end of adapter tapers from 22mm to 22.5mm and fan side holds a 40mm fan (screw holes 32mm apart) or a 60mm fan with screw holes 50 mm apart
There is a version to use heat-set inserts and a version that doesn't require heat-set inserts. If you don't anticipate removing and re-installing the fan too many times, the heat-set inserts may be left out.
Required parts:
- CPAP hose to dry
- 40mm fan (or 60mm fan)
- 4 m3 screws approximately 5mm longer than the fan's thickness (I used 25mm screws for a 40x40x20mm fan. 30mm screws for a 60x60x25mm fan)
Optional:
- 4 M3 Heat-set threaded inserts. The ones I used are about 4mm long.
Check out the Video about how I designed these models: