CPAP Hose Dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hook up a computer fan to a CPAP hose to help with drying. 40mm and 60mm fan adapters available
- Rating
- 3.75 / 5
- Likes
- 35
- Downloads
- 176
- Makes
- 1
- Views
- 1,268
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
Edit 9/6/25 - added options for 60mm fans.
This model allows you to hook up a 40mm (or 60mm) fan to blow air through your CPAP hose to help dry it out.
Hose end of adapter tapers from 22mm to 22.5mm and fan side holds a 40mm fan (screw holes 32mm apart) or a 60mm fan with screw holes 50 mm apart
There is a version to use heat-set inserts and a version that doesn't require heat-set inserts. If you don't anticipate removing and re-installing the fan too many times, the heat-set inserts may be left out.
Required parts:
- CPAP hose to dry
- 40mm fan (or 60mm fan)
- 4 m3 screws approximately 5mm longer than the fan's thickness (I used 25mm screws for a 40x40x20mm fan. 30mm screws for a 60x60x25mm fan)
Optional:
- 4 M3 Heat-set threaded inserts. The ones I used are about 4mm long.
Check out the Video about how I designed these models: