Counting matching models…
Designed another super short nozzle for my M18 Fuel blower to help with cleaning tasks around the shop. This one has a sweep/broom/wide opening, especially useful for drying your car. I printed at 1.5mm line width using a 0.8mm nozzle and…
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
This is a adapter nozzle for the Milwaukee M18 FUEL Blower (3017-20) that allows you to attach the Sealegend Gutter Cleaning Attachment Kit Compatible with EGO leaf blowers https://www.amazon.com/gp/product/B0CWRKSYLP/. That kit is…
Print approx. €9.20–€11.25 excl. taxPreliminary estimate for PETGSource material: PET
This is a redesigned power slider switch button for the Black & Decker Cordless Leaf Blower (LSW321). My aging mother no longer has the full function of her hands due to arthritis. This presents a problem as she is unable to apply the…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
My hand cranked turbine blower is cool and works fine - however you have to crank it really fast for a nice blow. So i tried to add another planetary gearbox - and it works so much better (and unfortunately louder). All parts are 3d…
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
nozzle for the Milwaukee 2724-20 M18 FUEL Blower there's one thicker one and one thinner one
I've been using the DeWalt DCBL722 20V leaf blower now for better part of a year. I was always disappointed it only ever came with the one nozzle on the end of the blower called a “concentrator” but it's really more of a diffuser. I was…
A wall mount bracket to hang the Ryobi 18V Leaf blower (Model # P2180).
Introducing the Milwaukee Leaf Blower Gutter Cleaning Attachment, your ultimate solution for maintaining clean gutters without the need to climb onto your roof. This innovative printable file is designed to make gutter maintenance easier…
***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…
A medieval soldier blowing a horn. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The other…
Recently upgraded to the Micro Swiss NG for my Ender 3 v2. While the kit from Micro Swiss includes a shroud to use the stock 4010 axial hot end fan and 4010 blower part cooling fan, I wanted to use larger fans. I looked around and found a…
Wall brackets for Ozito (Einhell) PXC 18V Workshop Blower and Inflator. I designed these wall brackets for the Ozito (Einhell) PXC 18V Workshop Blower and Inflator and associated accessories. There is provision for a dowel pin in the…
I recently bought a Dyson V8 and noticed the amount of air that comes out of the air filter while vacuuming. I have been contemplating buying a battery powered air duster and this got me thinking an adapter would make the Dyson V8 a…
the inlet has a staged arrangements to allow for multiple sizes of leaf blower to be attached, however it will need to be secured to the leafblower using duct tape to stop it blowing off when in use the exit nozzle is placed at an angle…
UPDATE 2: Increased the size of the counter screw hole and around the hotend mounting groove to fit M3 insets. Old files for self-cutting screws still online. These may need some re-tightening every couple dozen hours of printing. UPDATE:…
This is a compact support designed for a blower. It’s quick to print and requires no supports, making it a hassle-free project. I’ve included the STEP file so you can easily modify the design if you need to adjust the screw size or make…
* This is the Volcano version of my Hemera Part Cooler * I made this after several requests after publishing my standard Hemera Part Cooler. I don't have a Volcano so if you do make and test this cooler please leave me some feedback My…
⭐ Instructions: 🔹3D Printed parts: 1x Housing Base 1x Housing Top 1x Fan Blades 1x Fan Duct 3x Screw 3x Nut optional: 1x Rubber Gasket optional: 1x Cutting Stencil 🔹Print Settings: All parts print without support except Housing Base All…
This is a print that adds an inductive style probe to the remixed model. Klemco provides files for touch style and inductive style but DOES NOT provide files that work for the cheap inductive sensors. This will, whether your detecting…
Milwaukee blower sweeper nozzle
Inspired only by the fact that the delivery did not happen without damage to the shipment. The original has completely straight blades and just blows air around and doesn't cool the engine too much. This version is quick without…
I have found when printing PLA, on some parts where even cooling is critical, the stock blower duct on the Replicator 2 is uneven. Favouring right to left movement, rather than left to right on the X axis. So I set about designing a new…
This is a quick remove version of my Hemera Part Cooler. My aim with this design was to efficiently transfer the air to the part with as little restriction to the air flow as possible, but at the same time getting the air to where it is…
This design is printable with or without supports, but only from the build plate. Printed with internal supports, it can be difficult to remove without destroying the print, in my experience. Print Settings Printer: Any Printer No…
This is a sort of all in one hotend shroud solution for the ender 2 pro. I remixed the bltouch mount and hotend cooling fan brackets from the linked models, and designed the adjustable part cooling fan mount myself so that I can lower the…
A part cooling fan mount and nozzle for the 713Maker ball cup effector plate using a 3010 blower. I am rebuilding my old MakerLibre 1515 Mini Kossel and upgrading it along the way. I decided to go with the SeeMeCNC ball-joint effector…
This is a mount for 2 5015 Blower fans as part cooling fans, for when you really need some cooling power. It is for the Metal Kit V1 for BLV MGN CUBE. Been testing it for a while and will keep making improvements as they come. The Mount…
Ryobi (or others) Leaf blower choke lever. If this fits your model of carby let us know so I can add it to the description. Update: tweak resting angle, add relief for easier installation and reduce overall height.…
I would print a sample slice of the part before you print the full parts, your print setting may be slightly different than mine.
Print blower in TPU, works best with adaptive layer lines. Overhangs tend to droop causing leaks, watch first ~55 layers carefully for this! Rest of the model prints fine. Nozzle noticeably increases velocity of output, while sacrificing…
Fair warning: I Frankenstien'd the fan box together in my slicer and FreeCAD so it is a 3mf with a negative part that you may or may not need. Maybe someone that is more talented at 3D modeling can fix it some day... My goals were to make…
I designed this gear to replace the stripped gear for my Ariens snowblower. It needed some minor filing on the teeth of the gear to get it to mesh better with the metal drive gear but all in all is working properly. I printed with PETG 8…
This works very well on my Husqvarna snowblower. It is difficult to select 1st and 2nd gears since there is no indicator. This helps a lot.
A small spring clip repair to hold the housing in place
STP file with the whole assembly (including blower and accessories which where 3D scanned) is included for easy modifications. The negatives parts (one in box body and the other in the lid) are independent pieces from the box (i thought…
Ryobi RY40407VNM Leaf Blower Slatwall Mount Easy mount design Slatwall Mount Wall or Post Mount This cradle mounting design, makes hanging up the leaf blower a breeze. No need to fiddle with finding a keyhole hanger, that is hard to see.
This model is designed to be used as an assistive device. It is intended to help with the ease of use of a leaf blower for those who might utilize a prosthetic arm. The attachment is comprised of 2 main parts: 1 that is installed onto the…
A cleat for Ryobi's 18V One+ Leaf Blower (R18XBLW20), that connects to the Ryobi Link system. Also works for P21012VNM. Prints with no supports. Recommended settings: 0.20mm, Quality, PLA, No supports, Infil 15%.
I printed this part out of PETG with 4-5 walls and 10% infill basically prints the walls solid. I had to print these in two parts as they are too big for my printer. The mating parts have an interference fit that okay, not perfect, but…
This 4010 extended blower duct is specifically designed to optimize airflow for the K1 CHC (Ceramic Heater Core) Hot End , seamlessly integrated with the Toybox Alpha 3D Printer's stock fan location . The duct channels airflow efficiently…
Scraper Bar Replacement for Greenworks Part R0200650-00 for 22" Snow Blowers, Tested working great with my SN60L02 but according to Greenworks should work with the following as well: Product Number Voltage Model 2605902 80V SNB403 2610102…
This is a complimentary bracket to be used with the terminal block by @driftrotor. I wanted to use a spare 3010 blower fan I had for chamber circulation. Optional mounting for a small JST interconnect PCB from a LDO kit, if you have that…
Based on printing material, you may need to increase or decrease the scale, this was designed for ABS which has a shrinkage of around 2-3%, less contractive materials may need to be printed at 99% or 98% scale.
🌀 Portable Blower Fan – Compact & Battery-Operated Stay cool on the go with this pocket-sized, battery-operated centrifugal fan! Designed for portability and ease of use, this compact device fits right in your pocket and is simple to…
this is a simple remix of the printrbot® designed blower mount available here https://www.youmagine.com/designs/printrbot-blower-fan-mounts i added 2 square recesses and 2 hex recesses in insert nuts to allow for a better fit. also…
Customized version of https://www.thingiverse.com/thing:1109880 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1109880 Instructions Using the following options: tipLength = 28 tipWidth = 3 tipDistance =…
ADDITIONAL PARTS NEEDED FOR ASSEMBLY: BEARINGS: 608 (16) 6808 (1) SCREWS (I used dome head): M5 X 30-60 (1) M4 X 20 (4) M3 X 4-8 (4) M3 X 24 (3) M3 X 30 (7) M3 X 30-40 (1) NUTS: M3 (10) M4 (4) ASSEMBLY SET PRINTING SETTINGS Infill 40 -…
This is a great modification for the Ultimaker 2, 2+ that replaces the stock fans with quieter, more efficient 30x30 blower fans. The upgrade improves airflow direction and enhances print quality—especially when printing overhangs or…
This model is designed to be used as an assistive device. It is intended to help with the ease of use of a leaf blower for those who might utilize a prosthetic arm. The attachment is comprised of 2 main parts: 1 that is installed onto the…
Gridfinity trays for https://fanttik.com/products/fanttik-b10-pro-electric-air-duster . The main tool is a 2x4x5 high, the tool protrudes out an additional 15 mm. The accessory tray is 2x4x3 high, but the nozzles there protrude even…
A stubby nozzle for the Dewalt DCBL777 & DCBL772 Flexvolt 60v leaf blower. Great for drying a car or cleaning out tight spaces. Print as oriented with at least 3 walls for strength. No supports needed. Also available with a wider slotted…
This holder allows you to attach the included brush/clean out tool to the handle of the Greenworks 22" 80v Snow Blower. My snow blower came with 2 extra self-tapping screws (pictured), so I designed this to use one of those. I also…
One more cooling fan duct. Blows to the right place, not just around. Weigh 5.22 grams. Cut unused screew hole (and half of the used) from the blower if you want to save more weight. I printed with PETG. You use whatever you like. I…
A stubby nozzle for the Dewalt DCBL777 & DCBL772 Flexvolt 60v leaf blower. Great for drying a car or cleaning out tight spaces. Print as oriented with at least 3 walls for strength. No supports needed. Also available with a round opening…
I would print a sample slice of the part before you print the full parts, your print setting may be slightly different than mine.
Wall Mount for Makita DUB185Z XBU05 Series Leaf Blower printed at 20% PLA
Quick and dirty replacement center paddle on a Greenworks 20" electric snowblower auger. It may or may not work for other model of snow blowers. Ideally, cutting up an old tire or other thick rubber would be better but didn't have that…
a handheld fan to blow away your farts! IMPORTANT this is still beta im still making updates to design
I lost my nozzle this is a replacement similar to the original. Nothing fancy but seems to do the job
You will need to use other, slightly longer screws.
I designed this gear to replace the stripped gear for my Ariens snowblower. It needed some minor filing on the teeth of the gear to get it to mesh better with the metal drive gear but all in all is working properly. I printed with PETG 8…
Simple hose coupler and trash cap for the AC Infinity 6 inch exhaust fan Printed 100% infill, Petg, ABS 2-4 layers, tree supports Please leave a "Like", Thanks for downloading.
My mother-in-law got this handheld blower from Seese. The link is below. She likes it but it is so short that there is very little control in blowing. She wanted to extend the nozzle. This is a 12 inch extension for the handheld Seese jet…
I modeled this adapter for my Harbor Freight blower vac. The tool sku is 62337, if you search it up it will be " PORTLAND 12 Amp, 3-in-1 Electric Blower Vacuum Mulcher" I used it to blow insulation into the uninsulated walls of my old…
After faffing around with the original fan and a variety of fan ducts to fit the original fan I ended up designing a whole new hotend cover to utilise two 5015 fans that I had knocking around from my now redundant ender 3. Pros: Insane…
This replacement fan blade fits a Ryobi blower model RY404010VNM and works great using PLA material and nozzle 0.4.
STP file with the whole assembly (including blower and accessories which where 3D scanned) is included for easy modifications. The negatives parts (one in box body and the other in the lid) are independent pieces from the box (i thought…
UPDATE: Made a v2 to give 2mm more clearance at the bottom of the chamber. Will prevent the fan touching the bottom motor mount during homing when the bed is at the max height. Pretty self-explanatory. Pick the model that matches the M3…
Flat Nozzle attachment for M18 Precision Blower tool. For M18v 0887-20. Snaps into place like nozzles provided. Supports necessary for the “lock” into place. Printed in PLA, 40% infill for strength, .20 LH. 2 walls. Print vertical with…
Mounts for 5015 blowers for Voron 2.4 350mm bed printer with kinematic bed mounts installed. Without the kinematic bed mounts, there probably isn't enough clearance under the bed, so either use a lower fan tilt angle or a different mount…
🧙♂ Glassblower Gnome – Master of Molten Magic Bring a touch of handcrafted charm and Nordic workshop spirit to your print bed with this Glassblower Gnome ! 🔥🫧 Few supports are needed. I used organic-style supports, which peeled off…
These 3D printed attachments improve the handling of the Ariens Compact 22 model by offering a more ergonomic grip, reducing hand and wrist fatigue and injury during long snow clearing. YouTube: https://youtube.com/shorts/RJsWrlRgMPI
This optimized ST1 snow blower key sits flat on the snow blower to reduce wear on the part.
This is a rework of the stock attachment for the GBU02 by Makita. I changed the tube shape and outlet to be more efficient and sturdy. Use supports and brims. I use ASA, or PA.
Wall mount for the Milwaukee M18 M18FBLG30 Blower Other mounts in photos M18 Hedge Trimmer https://www.printables.com/model/938751-milwaukee-m18-hedge-trimmer-wall-mount M18 Power Head…
This is for the model/part Carrier 309868-755 (with aftermarket product Packard 66755). These vary for between $250 and $1000 online. My motor was still perfectly fine, the but the broken fin was causing huge imbalance on startup and it…
Optimized performance by smoothing airflow, reducing turbulence, and increasing air density. By providing a laminar flow and accelerating air into the turbine. Resulting in a 8% peformance increase over no/stock inlet manifold, tested!…
I made this nozzle to make my "Ego" model LB7650 cordless leaf blower more effective at cleaning debris off of hard surfaces. It is a friction fit over the tube that is 91.5 mm in diameter. If you need a different diameter, contact me.…
Snowblower ski replacement. Fit Husqvarna Having a lot of loose gravel in the driveway, I need something more large easier to slide than the narrow ski that cames with the machine. Fits my Husqvarva (2 1/2 inchs between bolts) 1 inch…
My dog chewed up the original nozzle so I created a replacement.
This blower fan cooling duct is angled down and straight out. Printer: ANY Nozzle: 0.4 mm Line Width: 0.30 mm Layer Height: 0.10 - 0.20 mm Speed: You pick speed for best printing Filament: ABS, ASA, PCTG, PETG, etc.
Adds a pad where the lower portion of the blower rests against the wall.
Replacement fan for Ryobi RY40408VNM 40v Blower. Part # HM-537642001, Print with PETG-CF.
This uses the blower from the advanced filtration unit.
I wanted a replacement nozzle for my 40V Greenworks leaf blower. First print was a surprising success. I was guessing I'd need a least a couple of adjustments to my guess. I measured the opening on the original nozzle and eyeballed the…
After accidentally breaking off a fan blade on my low profile MSI GTX 1650 transcoder card, I decided screw it, I want a blower card anyways to evacuate the heat out of my server. I had a 60mm fan laying around so I created this. Max fan…
Different types of nozzles for the (HJB-172) Denver Jet Blower. Quickly designed. Some changes were made for the type 2 to fit a bit better.
Used PLA but PETG might be better choice. 0.3 - 0.4 mm layers / 4 perimeters /15% gyroid in-fill /supports required (recommend organic supports)
I made this to go in condjunction with the Hive filter modification I made as well. Since i have the blower inside the machine the exhaust from the printer is not filtered at all so this housing holds just the air filter in place without…
How much performance can you really get out of a small 3V motor? In this project, I take a standard 180 DC motor powered by a single 18650 battery and push it to its limits by building two different 3D printed blower designs. Both…
Welp. Do you like putting things that are way too big onto things that absolutely did not ask for it? Then this is for you. This adapter lets you strap a massive blower fan onto a 75W GPU... completely reasonable behavior. It's a tight…
This is a reinforced remix of the original Ryobi 40V blower wall hanger. While testing the original design, I discovered it also fits the Kobalt KHB-3040-06 electric blower and Kobalt KST-120X-06 trimmer — great news if you run a…
Very simple bracket with two mounting position for internally mounting a 5010 blower fan.
I wanted a small blower for my firepit. This is a printed and tested model, everything fits an works as currently designed and uploaded. You will need to print the shaft spacer last so you can measure its height, and scale it vertically…
This is a remixed and modified toolhead design for the Ender 3 V3 CoreXZ, optimized for a 5015 blower fan upgrade. I couldn’t find a ready-to-use solution that fully matched my needs, so I combined and redesigned parts from existing…
