EGO Blower Nozzle
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€9.20 – €11.24 net (excluding VAT)
For file: EGO Short Nozzle_0.6n_0.4mm_PETG_MK3S_5h39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €10.22 excluding VAT (range midpoint).
- Weight reported by the author
- 239 g
- Print time reported by the author
- 5.66 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Shortened EGO 530, 575, 580, or 650 Blower Nozzle
- Rating
- 5 / 5
- Likes
- 70
- Downloads
- 437
- Makes
- 4
- Views
- 3,798
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This a remix of a model originally created by vehicular on Thingiverse. It fits an EGO 530, 575, 580, or 650 blower which can make it easier to dry off your car than the much longer original EGO nozzle. I shortened it to be able to print on a Prusa MK3S and I also made it thicker for rigidity. It feels about as strong as the original nozzle now.
Tips:
Print in PETG for UV protection and strength
Use a brim so it doesn't fail like mine did twice
Change Vertical Shell Perimeters to 4
100% Infill (It adds minimal time and minimal filament on this model)
I used a .6 Nozzle with in .40mm Draft mode for a 5.5 hour perfect print
Line part of the inside with velcro (across but inline with the twist lock) to have a snug fit