981 models
Color order: Dark Red, Gold/Yellow. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for one variant
Scooby Doo Mystery Machine : Crash Derby Cars
Print approx. €2.62–€3.20 excl. taxPreliminary estimate for one variant
Low-Poly model of a 2024 Koenigsegg Jesko Absolut. Included are two Bodies, one with headlights and one without, functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This record breaking…
Print approx. €10.92–€13.35 excl. taxPreliminary estimate for one variant
Low-Poly model of a 2022 Dodge Challenger SRT Hellcat. Included are two Bodies, one with headlights and one without, functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This iconic…
Print approx. €10.92–€13.34 excl. taxPreliminary estimate for one variant
Color order: White, Orange, Blue. Quick Guide to changing filament~ Have some paper to push away extruded filament. When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back…
Print approx. €2.45–€3.00 excl. taxPreliminary estimate for one variant
Kids have too many Pixar Cars and nowhere to put them? You have tried printing out one of the Hotwheel Garages on printables, but you can't find one that fits? Well, look no further! (ok, maybe look a bit further, but you will be back!!!)…
Print approx. €18.27–€22.33 excl. taxPreliminary estimate for PETGSource material: PET
Coat hangers for cars that lack built in ones. These are placed over the hand holds above the back doors and secured with a zip tie. As every car and zip tie is different, parametric FreeCAD models are attached where you can edit the…
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for PETGSource material: PET
Unfortunately no yellow/gold fiber :(( The model consists of only two models. When folded, the model is 15 cm. There is a hole in the middle where you can put things. The size can be changed in each of the slicers
Print approx. €8.52–€10.41 excl. taxPreliminary estimate for one variant
Addams Family Munster Coach : Crash Derby Cars All versions have an extra version of just the car included. Remove if not needed.
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Count Spatula : Cars post build I added another .6 offsets to the model as a whole. You should be able to get away with resizing it to 60 percent.
Print approx. €42.87–€52.40 excl. taxPreliminary estimate for one variant
The STL file is very small, you can size it for any printer. I have already added the filament changes to the 3mf file for the MK3s+, but if you resize it you will need to change the height of the filament changes.
Print approx. €5.69–€6.96 excl. taxPreliminary estimate for one variant
Cars : Pixar Style : Easter Buggy From Mater and the Easter Buggy
Print approx. €15.43–€18.86 excl. taxPreliminary estimate for one variant
for German Christmas coockies
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for one variant
These are just some dummy/vanity wheels you can put on your drag chassis to make it look/sit semi realistically on the shelf while not being used, rather then have your race rubber tyres or sticky, smelly old rubber tyres sitting on the…
Print approx. €13.46–€16.45 excl. taxPreliminary estimate for one variant
A RFID DROPLET CASE for your public car charging tag. I created this small case to encase my RFID charging ‘droplet’ tag. The opening for the keychain broke after a few weeks of usage, so I needed to fix this. This case is a simple print…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Servoaufnahme, um einen Standardservo zur Ansteuerung der meiner Lenkachsen aufzunehmen. Er wird hinten durch die ersten Anlenkungen der Achsen fixiert, vorne sind zwei Bohungen im Rahmen des Goldhofer erforderlich. Damit wird zugleich…
Print approx. €1.60–€1.96 excl. taxPreliminary estimate for one variant
Akkubox für Goldhofer Sattelauflieger mit Deckel im Maßstab 1:14 zur Aufnahme eines Standardakkus, Zusätzliche Aufnahme für eine Servonaut-AMO-Elektronik. Der Deckel wird mit Neodym-Magneten (5 x 3) gehalten. Dafür ist in der Akkuwanne…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
A gridfinity bin for a Fiscars Pro. It is a low as it can get. It fits in my drawer with 1mm left :-)
Print approx. €4.22–€5.15 excl. taxPreliminary estimate for PETGSource material: PET
One blank version and one with a snowflake. Use your slicers build-in functions to add your personal touch with it! The pre-sliced has 25% infill
Print approx. €1.84–€2.25 excl. taxPreliminary estimate for one variant
What Is It I was asked if I could find and print a replacement battery pack for a 20-year-old Spider-Man RC car. When I couldn't find it, I decided to build it. Parts Info / Assembly There's two ways to go about this. 18650s, or…
Print approx. €2.23–€2.73 excl. taxPreliminary estimate for one variant
Cars(Sally) as a decor for your christmas tree
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for one variant
Wandhalterung für E Auto Ladestecker. Mit und ohne Grundplatte
Print approx. €7.00–€8.55 excl. taxPreliminary estimate for one variant
Bodywork supplement washer shim for Carson CV-10. Printed in PLA at 0.2 Arandela suplemento carrocería VW Golf Rc Carson CV-10. Imprimido en PLA a 0.2.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Guido : Cars
Print approx. €10.27–€12.56 excl. taxPreliminary estimate for one variant
Update 01.06.2024: The wall generation in the current slicer version makes the eyebrows rough. I have adjusted the color so that it is not noticeable (new version V3). Summary This is a model of Lightning McQueen in a kit card style. Some…
Rush hour rules are easy. Clear the way for the red car to be able to leave the parking lot. Cars can move only forward/backward, no lifting the cars! Printing: Depending on the challenge difficulty, you'll need to print up to 4 trucks…
Leave a Like or a Make to support me ;) I could not find such a mount anywhere that fits all cars and all tablet sizes. Therefore, I have now developed a model which is completely printable. I created two sizes, once 130-200mm (5.1-7.9…
There are about 20 Rocket League cars missing (as of 1/23/2022). Some models either didn't export correctly or don't open in the first place. I cannot get the console exclusive cars either. I am currently working on trying to get more…
From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…
Dodge Charger 1969, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
VW Beetle, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
Piston Cup from Pixar Cars. Print Settings Printer: Overlord Pro Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: Just print it laying on the bed Post-Printing ============= If you want all the entire cup joint the top and…
Ramps for Hot wheels cars and monster trucks Print Settings Rafts: No Supports: Yes Resolution: .2 Infill: 12 Notes: Need supports for the connector area. The rest of the ramp is self supported. Category: Playsets
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 If you like my work, consider support me through Patreon:…
After finding all 12 of the Lego mini F1 cars, I decided to design a simple tiered rack for them, hopefully the stud size is good enough for most printers, it's hard to account for them all!
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base is also available from $5! Contact me to discuss what you want! If you like…
Update 2024-01-28 Added hex display module with more stable standing base for bottom row Also added variation of it with 60x10mm label insert Added hex display module with 3mm screw holes for attaching to a board, shelf or wall 1:64…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
I really loved the original design by teddymcwhitney but I only wanted a single mounting hole. Using Fusion 360 I was able to remix the base, mounting hole, and other geometry while taking measurements from the original. Printed on my…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
This is a single lane, 6 inch (152.4mm) stretch of track which can intermix with typical hotwheels track and can use hotwheels track connectors. There are 3 models to pick from: No Connectors, is very easy to print flat but you will be on…
Tires for RC cars, compatible with 3D Sets 3D-printed RC cars ( https://www.3dsets.com/ ). Print using TPU. Mirror the model to print full sets of four tires. Tires have 45mm inner diameter for a tight fit, and therefore can't be printed…
I use this for making obstacle course for Sphero droids, but it will be great for any RC toy like cars for your kids! Size Base 45mm x 45mm Hight 57mm Wall thickness 1.2mm Main features Stackable - for easy storage Fusion360 file included…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 If you like my work, consider support me through Patreon:…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base is also available from $5! Contact me to discuss what you want! If you like…
This is an oil funnel used for toyota vehicles. It should fit all toyotas with a threaded oil cap.
Steering Wheel for Cardbox cars or where ever it might fit! thightening just be turning the knob down! Wheel is screwed down with a m6 Screw, the Knob with 2 M4x25er from each side.
Mini Cooper, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Lamborghini Countach, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
I painted all parts by hand and glued them together. The led strip is glued to the bottom of the roof and routed the wires through the hole at the back.
Do you like interesting car models, especially F1, from the LEGO Speed Champions series? Give them a representative space in the frames on the wall. The available IKEA Sannahed 25 × 25 cm frames are ideal. First, print a test piece on…
I made some additional updated on TheBasedDoge's vehicle lift. Those changes include: Upgraded tray pieces to make it easier to fasten screws Upgraded post piece to make it easier to fasten screws Made it so at 1:18 scale you can use M3…
🚗Toy Cars🚗 Nozzle 0.4mm Print 0.2mm Infill 15% Support ❌ Brim ❌ Here are all our plans, take a look. Qui ci sono tutti i nostri progetti, dacci un occhiata. 📃→ ALL COLLECTIONS info: 👤Account link to share it= idea-prints CREDIT:…
I wanted halloween teeth for the miata and didn't like using just a flat piece cut to shape so I drew this up. Teef 1 and 2 are ~75mm tall while 3 is 120mm tall. TEEF 1 are the one in pictures. Just changed dimensions so people would have…
Hopper Car - Dragon Railway 1/64 Scale Assembly Manual: Google docs You will also need: Freight Bogie V1 Auto Coupler V1 Check out the Dragon Railway ecosystem! Join our : Discord Print settings: Cura 3MF file
🇲🇽 ¡Bienvenidos a CDMX! Welcome to Mexico City! The Trains of the World Collection will feature some of the most iconic railways, from cities such as Paris, Tokyo, New York, London, Mexico City, Melbourne, Seoul, and more! This entry…
Simple 4 Post Lift for R/C Cars. The main tray is split in half to fit on the print bed, attaches with 4 bolts and holds up 1/10 scale RC cars.
Update: 08.09.2026: New stand with Matchbox logo :) Logo is now having more back so the whole stand is more stable. Also I have made the cutouts from the scratch and fixed some issues with vertices . If you would like to support me - you…
F1 Garage ( For 1/43 Model Cars)
Porsche GT3 RS, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
A simple stand for your LEGO F1 minis. 30 degree angle for viewing purposes Tolerances on the studs are tight to prevent cars from falling off easily. Printer Settings: 0.2 PLA 20% Infill
I've designed two different print in place support free axle benders for pinewood derby cars. They are used to bend standard axles, 0.087 inches in diameter by 1 inch long. One is a hardware free version that bends a single angle ~ 3…
Cheech and Chong Love Machine : Crash Derby Cars Designed for use with the Crash Derby Cars Game Extra solo car included (remove from plate if not needed to save time) Print at .1 lh if you slice it yourself. Update (12/13/2025) : it…
Bumper cars SCAD files and STLs for bumper cars tokens and parking keys. These files should be compatible with hardware produced by "SOLI Bumper Cars" , which can be commonly found (AFAIK) in the Northeast area of Italy. Token Tested and…
errari F40, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
Tiny F1 McLaren MCL40, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
Display your LEGO Speed Champions cars with a clean, angled desk stand. This 3D printed display stand is designed for LEGO Speed Champions style cars and lets you show off your collection without taking up a ton of shelf space. Each car…
A heavy duty headrest hook to keep your groceries, shopping bags, iPad, purse, and more secure in your car or automobile. Features: Heavy duty hook. Rotating latch to avoid accidently knocking the hook from the headrest bar. Instructions:…
[2019-02-08]: Added some pictures of my built. Sorry for the colors, but my "customer" wanted a funky barn... [2019-02-06]: Provided the walls as one piece. Print them standing upright. This may increase stability. If your printer is…
Ford F-150, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
It's first version. I'd recomend fix with glue on intencive playing) Still wandering about connection parts. Some fence fixed so now better connection PS - Update “Fence_Middle”, just missed one hole in previous model Like my work? 🔔…
Low-Poly model of a 1974 Porsche 911 Turbo 930. Included are functional double-arm suspension, Print-In-Place wheels, and three different rims to adorn your wheels. This classic German sports car is at roughly 1:25 scale. Tolerances may…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base is also available from $5! Contact me to discuss what you want! If you like…
Designed from one of my typical 50 foot box cars, fully printed everything except for the bogies/axles/wheels and the Kadee couplers. I designed the coupler box on to the undercarriage and also modeled a coupler box cover that is friction…
Have you encountered the problem of not having enough space to show off your extremely cool car collection? Well i certainly did! This is your solution! you can stack 3 cars on top of each other, this way making room for 2-3 times more…
Ranging from 4mm thick to 8mm thick these are for RC cars with axles up to M4 that use standard 2mm x 10mm pins. These will also work for smaller 1/16 and 1/18 scale that use M3 and 1.5mm x 10mm pins. The 4mm thick adapter will allow you…
Ferrari Sf-26 F1, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Finally, there is a website, where I will bundle all the information on the 3D Scanner, feel free to visit http://www.openscan.eu Scanned with my DIY 3D Scanner and processed in MVE, for more details on the scanning process and the…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base is also available from $5! Contact me to discuss what you want! If you like…
Here are available side mirrors for RC drift cars. The mirrors are in 1:10 scale. I always had a problem with mounting the mirrors, so I fitted them with a thread and a nut. The mirrors follow a design direction towards Japanese drift…
Car McQueen from the movie Cars. ENJOY!
5 cookie cutters for construction Cars. Includes a Paver, Excavator, Mixer, Hauler and a Loader
[ITA] Dimensioni: Diametro Gettone : 34.88mm Diametro Estrusione Interna : 21.55mm Diametro Foro Interno : 10.91mm [ENG] Dimensions: Token Diameter: 34.88mm Internal Extrusion Diameter: 21.55mm Internal Hole Diameter: 10.91mm
Nissan Skyline R34, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Imported from my designs on Thingiverse. Original upload was 13.06.2020 (dd.mm.yyyy) I reuploaded this here to make the bracket files in one continous upload strike I do most mechanical design. This was requested by…
Just print in TPU, infill 30%, supports needed. Original file is for tools with a diameter from about 25 to 40mm
Different Toy Cars | Print in Place VW Bus T1 | John Deere | Lamborghini Murcielago | Land Rover Defender | Tesla Model 3 | Ford F150 | Porsche 911 Carrera RS This Toy is designed to have a print in place chassis and a separate body,…
Another model included in my series of tiny car (not realistic) models. A bit of Le Mans endurance race style racecar. Dimensions (version 1) Width: 15mm Height: 8.5mm (approx.) Length: 33mm Wheel base: 20mm Wheel size: 5.6mm Background…
Díly se lepí lepidlem a spojijí kolíky, tisk bez podpor!
A simple display stand for up to 2 LEGO F1 Collectable Race Cars. There are two bases, one with two compatible lego studs on and one without, so you can either display 1 car per stand or two. You could, if you wanted, display a car and a…
BMW M3 2025, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Mercedes AMG GT, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
Cute Cars - The Giraffe This is part of a whole series of fun animals in vehicles . The Giraffe car - The giraffe tilts pleasingly from side to side, when you drive the car. No parts need support. The car can be printed on a raft, if you…
I designed a small 16 slots car garage for my son to keep any hotwheels car made. Its size 180x180x85 mm Every slot has its own small barrier to keep cars from accidental falling. For a bigger garage just print few of this and glue them…
My 8 train cars for the game. They're prepared for 2 color print, but if you prefer they should look good also in single color. The real cars were only an inspiration, so don't expect to much. My .3mf file (OrcaSlicer) is set to make as…
KITT from Knight Rider, a Pontiac Firebird Trans Am, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print…
This is a small single lane 180 degree turn for diecast/hotwheels cars. Print one each of the track components then 2 Hotwheels track connectors and 3 slim connectors. If your slim connector fits really tight you might want to try scaling…
![[ITA] Gettone Autoscontri - [ENG] Bumper Cars Token](https://media.printables.com/media/prints/271093/images/2412960_abed072f-3dd0-4817-a141-e4ef9ddc84e3/1.png)
