1 / 4
Six Inch Single Lane Track for 1/64 Diecast Cars — image 1
1 / 4

Six Inch Single Lane Track for 1/64 Diecast Cars

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Track compatible with hotwheels connectors and many 3d printable connectors/couplers.

Rating
4.8 / 5
Likes
140
Downloads
1,598
Makes
10
Views
3,878
Reviews
5

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial

This is a single lane, 6 inch (152.4mm) stretch of track which can intermix with typical hotwheels track and can use hotwheels track connectors.  There are 3 models to pick from:
 

  1. No Connectors, is very easy to print flat but you will be on your own connecting it to other pieces.
  2. Connectors, can fit hotwheels track but might feel wasteful printing with supports in a flat orientation and might exhibit significant wobble if printed vertically.
  3. Connectors_4x, has been oriented so that the 4 pieces of track are joined with little tabs that can be cut with flush cutters and is intended to be printed standing upright, no supports are needed and a brim only if you want.  If you need connectors this is the intended model to be printed.

Tags