1 / 4
Six Inch Single Lane Track for 1/64 Diecast Cars — zdjęcie 1
1 / 4

Six Inch Single Lane Track for 1/64 Diecast Cars

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Track compatible with hotwheels connectors and many 3d printable connectors/couplers.

Ocena
4,8 / 5
Polubienia
140
Pobrania
1598
Wydruki
10
Wyświetlenia
3878
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial

This is a single lane, 6 inch (152.4mm) stretch of track which can intermix with typical hotwheels track and can use hotwheels track connectors.  There are 3 models to pick from:
 

  1. No Connectors, is very easy to print flat but you will be on your own connecting it to other pieces.
  2. Connectors, can fit hotwheels track but might feel wasteful printing with supports in a flat orientation and might exhibit significant wobble if printed vertically.
  3. Connectors_4x, has been oriented so that the 4 pieces of track are joined with little tabs that can be cut with flush cutters and is intended to be printed standing upright, no supports are needed and a brim only if you want.  If you need connectors this is the intended model to be printed.

Tagi