Liczymy pasujące modele…
Showcase your prized Hot Wheels or other 1:64 scale die cast cars in style with this custom 3D-printed display shelf! Featuring a sleek, tilted design, each compartment perfectly displays up to 10 cars, making sure they stand out from…
A 180 degree 1/64 Diecast Car Track, now setup to use male connectors - printable in PLA or PETG - track is obviously female. This can fit on a Prusa Core One or A1, P1P/S/X1C, Centauri Carbon etc. Recommendation I recommend the…
Recomended to print at 25 mm/s, 190°C for PLA and 230°C for TPU, 1.2 mm layer height, 10% infill, 2 walls.
Overview Declutter your collection and showcase your miniature rides with this Stackable 1:32 Scale Diecast Car Platform . Designed specifically for 1:32 scale models (commonly known as "3-inch" cars), this modular display system allows…
This is carlift can be stacked sideways (for diecast Hotwheels, Matchbox, Tomica MiniGT, etc)
This is a modeled for 1/64 scale Nascar diecasts, this might fit other 1/64 scale car diecasts I have not tested it though. It can fit up to 6 dicasts.
1:64th scale diecast display for Hot Wheels, Matchbox, etc. The original files are larger displays, but I wanted something smaller that kept the same aesthetic. I removed slots to make the display fit better on smaller printers or reduce…
I designed this based on the original parts. You can see from the pictures that they were pretty badly broken. I measured as carefully as I could and designed the new parts to be as close as my 3D printer could get to the originals. I had…
Showcase your prized Hot Wheels or other 1:64 scale die cast cars in style with this custom 3D-printed display shelf! Featuring a sleek, tilted design, each compartment perfectly displays up to 10 cars, making sure they stand out from…
I have created a custom ramp mount for 1:16 scale diecast cars. The ramp allows the car to sit at an angle, and has enough stops in the front so it cant roll off of it. There are also raised edges on the side back for added protection…
Scalable display stand for 1/64 diecast cars, inspired by vertical parking garages. Sized to fit most 1/64 cars, including Hotwheels, Matchbox, Mini GT, Tarmac Works, Inno64, and more! Important Note: Scale the floor's width to 99% if you…
Heres what the original author had to say about putting in the model cars: "The cars insert from the back side. In order to clear the top, you will need to unscrew the car from the original base. I then used a piece of filament instead of…
A 45 degree 1/64 Diecast Car Track, now setup to use traditional connectors PLA or PETG. Models are designed to print with no support to minimize wasted filament. 4 are required for a 180deg turn! Unlike the 30deg models, these do not fit…
A shelf for your 1/24 scale diecast cars with a lip so your models wont roll off!
This is my 8 car wall or desktop display for 1:64 diecast model cars. Print and use :-) nothing more to it. This cannot be used for commercial purposes (file and printed versions) Additionally you can buy a 19x22cm plexiglass plate 2 or 3…
PRINTED ON: Prusa MK2S This is a simple stand for your 1:43 scale Bburago diecast utilizing the stock screws and holes. Side profile.
PRINTED ON: Prusa MK2S This is a simple stand for your 1:43 scale Bburago diecast utilizing the stock screws and holes. Front profile.
These speed bumps were designed upon request of my 4-year-old. He has a play mat with lots of roads for driving his Hot Wheels, which these speed bumps were made for. Of course, using these as-is will result in them sliding around when…
A 90 degree 1/64 Diecast Car Track, now setup to use traditional connectors - printable in PLA or PETG PRINT SETTINGS PETG - 0.18 layer height on 0.6 (or 0.4) nozzle, 15% gyroid infill, 2-3 walls, 2-3 top layers, IRONING ON ALL TOP…
A 180 degree 1/64 Diecast Car Track, now setup to use male connectors - printable in PLA or PETG - track is obviously female. This can fit on a Prusa Core One or A1, P1P/S/X1C, Centauri Carbon etc. Recommendation I recommend the…
I was tired of stacking these cars up on themselves on my desk, so I designed this. Works for both brands, and maybe others that use the similar style case. Print upside down with supports (except for the center part)
These are modular units to display your M2 Machines diecast. These will fit the cars that are still on the base and will fit with the plastic cover still on. To fit the diecast still in the original cardboard packaging you may need to…
(Vehicle pictured is a 2016 Alfa Romeo Giulia from Matchbox)
it is used for diorama or as an accessory for 1/24 scaled diecast made for low cars and can be also used for high cars
Stabilize and connect two tracks side by side. Requires 4 male standard 1/64 Diecast Car Track connectors to connect track together. The Built in Supports to this dual lane connector bridge snap/break off easily with pliers or even your…
3D PRINTING The print takes around 200g of filament (1:64 scale). NB! FOR 1:64 YOU NEED TO SCALE THE MODEL TO 120% IN THE SLICER! The roof needs to be printed upright with bed adhesion enabled . The terrace was simplified so it could be…
This is a remix of another remix I found. I made it so the full tower was cut into individual car components that easily and strongly connect with no adhesives needed. I split it into two separate versions, a base and a stacked version.…
I present you - ultimate tilted Diecast 1:64 Scale Wheel Stand. Made from scratch for the enthusiast of Diecast, Hot wheels, Matchbox and any other brands! Two sizes - bigger for approx 120 wheels with place for your custom logo and…
Printed from cool white PLA, with auto-generated support inside overhangs. The support is easily removable with a knife (be careful). I also recommend using an outer brim or mouse ears for better adhesion to avoid warping of the corners.…
This is a small single lane 180 degree turn for diecast/hotwheels cars. Print one each of the track components then 2 Hotwheels track connectors and 3 slim connectors. If your slim connector fits really tight you might want to try scaling…
Diecast Car Lift Upgrade your diorama or die-cast collection with this 3D-printable modular car lift , designed to be compact, elegant, strong , and fully customizable. This STL pack includes all the parts needed to print a realistic and…
This is a big 3d printable loop, the two base pieces print in their upright orientation. The two top pieces need to be supported and can be oriented as you see fit (i face the track side up so all support would be on the outside of the…
A three lane 180 turn, this is a rebuild of a 1 year old turn using all the things i've learned in the last year. It allows for smooth 180 racing across 3 lanes. Cars with poor clearance do just barely high center in the middle but they…
This is a single lane, 6 inch (152.4mm) stretch of track which can intermix with typical hotwheels track and can use hotwheels track connectors. There are 3 models to pick from: No Connectors, is very easy to print flat but you will be on…
Display your 1:64 diecast cars (Hot Wheels-size) on the wall without drilling . This mount is designed around Command hook-and-loop picture hanging strips and holds the car at a clean display angle. What you need (per mount) 1 pair of…
I needed a stand for my 1/24 Formula 1 diecast model cars, so I made one. Some assembly required. The stem needs supports.
Pretty accurate copy of a Fast and Furious base to replace a broken part. Can be also printed in two part.
Recomended to print at 25 mm/s, 190°C for PLA and 230°C for TPU, 1.2 mm layer height, 10% infill, 2 walls.
A remake of c_irons original model. I have just rescaled the lenght to 24 cm to fit the max height of my Ender 3 V3 KE printer. Prints vertical with no supports. I have used PETG, this gave a good strenght to the model.
Overview Declutter your collection and showcase your miniature rides with this Stackable 1:32 Scale Diecast Car Platform . Designed specifically for 1:32 scale models (commonly known as "3-inch" cars), this modular display system allows…
Overview Declutter your collection and showcase your miniature rides with this Stackable 1:32 Scale Diecast Car Platform . Designed specifically for 1:32 scale models (commonly known as "3-inch" cars), this modular display system allows…
This is carlift can be stacked sideways (for diecast Hotwheels, Matchbox, Tomica MiniGT, etc)
MODULAR DISPLAY FOR 1/64 DIECAST CAR ONLY 34 GRAMS FOR 4 CARS The stand consists of two parts - module to infinitely expand (until it loses balance), and the top piece. Each shelf features tyremarks to hold your models in place. Easily…
I designed a rim of my 1:18 AUTOart BMW 635CSI model car which can be moved like the real thing and has all the parts from a real car. It has all the cool functions and is highly detailed. It will be a stand where the model car sits ontop…
UPDATE 25APR2026: V2 files added. Widened the cradle areas on the support piece to allow the saucer section to rest further into the nook. Added a slight tilt to the support and base design so that the bow of ship points up slightly.…
Stackable! Heights Adjustable! This modular design allows you to use one stand on its own, or combine multiple stands together to create a larger display set up. It is simple to assemble, sturdy, and great for showcasing Hot Wheels, Mini…
Refer to original for details
Rear Bumper Diecast 1:64 Toyota Innova Reborn
Paddock Diecast Plastic Model Motorcycle Kawasaki H2R Tamiya Scale 1/12
This is a working lift for 1:64 diecast cars/toys. There is a gear at the back that when turned lift the model into the air. In addition to the printed parts, you will need 2 M6 bolts (50mm long screw thread) and 2 M6 nuts You will need…
This is a model I created to display my most prized Hot Wheels and Matchbox possessions properly. As you can see in the photos, it can also hold similar scale cars like the mini Lego F1 cars. It uses a nesting chevron shape with each of…
This is a model I created to display my most prized Hot Wheels and Matchbox possessions properly. As you can see in the photos, it can also hold similar scale cars like the mini Lego F1 cars. It uses a nesting chevron shape with each of…
This is a scale model of a 4-post car lift for displaying different size diecast cars. This is an updated version of a previous model of mine but instead of using M3 fasteners to put it together, I made the tray and posts fit with a…
This is a Hot Wheels / Matchbox 1:64 scale model of a 4-post car lift for displaying different size diecast cars. This is a remix of EG3Dprinting's 1:24 scale for Hot Wheels 1:64 scale. These snap together so you don't have to worry about…
Here is a display stand I worked up for 1:400 scale diecast aircraft. I originally designed it for an NG Models 737, but found it also works with NG's 757s as well. It also works for Gemini Models 737s and 757s and I and I'm guessing it…
Mini garage diorama to display your 1/64 diecasts especially designed for FDM printing. Everything prints fine, and is designed in fonction of layer heights and widths. Modular, very easy to print, this one requires no supports at all!!…
🚘 OZ Rally Wheel Assembly 🚘 🔹 Base size (tire): 50mm. 🔹 Consists of 4 parts: rim, tire, bolts, center hub.
These wheel chocks will stop your Hot Wheels / Matchbox 1:64 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA is easier to print and comes off the build…
Stop your cars from moving on uneven surfaces with these 3D printed chocks. Available in 3 versions: 25mm – suitable for 1:64 scale model 30mm – generic version for Hot Wheels cars 40mm – for Team Transport trucks
Extra requirements: all holes are 2,5mm, use M3 thread tap taper drill bit tool; 3x8mm and 3x4mm studs for assembly.
Base file is for the bottom layer to add stability to the tower. Extra requirements: Side holes are 4.2mm, use M5 thread tap taper drill bit tool; Top/Bottom holes are 5mm, use M6 thread tap taper drill bit tool; 5x8mm and 6x16mm studs…
Been looking for a way to display my Matchbox and Hotwheels collection. Found the IKEA Skadis board had alot of options. Found several display shelves I liked but I liked the one that Bills Workbench made the best. But it was not perfect…
The 1:76 scale Oxford Diecast cars come with a nice display case. Re-use the case for a small diorama with this street. The plastic casing snap on this print. The empty spaces are for Manhole covers and water access plates, which are…
A remix of the diecast display shelves I designed but to be used on normal pegboards instead of the IKEA Skadis pegboard. Normal pegboards can be found in home improvement stores like Lowes and Home Depot here in the US. I designed a…
These wheel chocks will stop your Hot Wheels 1:43 cars from rolling around on unlevel surfaces. They work on the front wheels, back wheels or both. Very quick print! HW Chocks-ChockA_43 is easier to print and comes off the build plate…
This is a Hot Wheels / Matchbox 1:43 scale model of a 4-post car lift for displaying different size diecast cars. These snap together so you don't have to worry about extra hardware or glue. I've added added a wheel chock near the front…
I didnt make the double post. if someone need it just comment here and ill make it.
This is a quick print 1/64 scale drive on car lift. Unfortunately the lift doesn't go up and down, but instead is stationary in a position the works great for Macro photos of your favorite diecast cars. Prints in two pieces, and you can…
Shelf for 1/43 scale cars that uses the honeycomb wall system. Holes can be used to hold the car in place on the shelf. I've uploaded the Fusion3d file if you want to change the holes, or modify the fit of the hexagons.
Display your favorite model cars of any scale on your wall with this sturdy and sleek shelf! Scale it in your slicer to perfectly fit the wheelbase of any model car scale with ease and freedom of customization! The model is divided into…
Designed in FreeCad and printed on my Prusa i3 Mk3s 0.40 nozzle 0.20 layers 25% infill
This is a simple mechanical start gate for HotWheels / Diecast 1/64 cars. Designed by PlayRobotics. This gate is really simple to print and assemble. In addition to the printed parts you will only need two M3 screws (20mm & 12mm long).…
Diecast track velodrome, might not be the most important upload... ;) but it saved a boring day at home! Fits Lidl "Playtive" tracks, but also compatible with other brands. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
sturdy little 3-level diecast car display. Holds 6 cars total. also holds 15 lego minifigures with their stands perfectly can be used to display other things like spray bottles for your airbrush or mini utensils and screws etc…
It has a large room even for your SUV diecast models. I raised the back of the floor a bit so any model has a clear look and I add a small stopper in front of the floor to prevent models from slide down. Also you can glue the model name…
These wheels were created as replacements for diecast cars. Hotwheels and matchbox for example. They were printed using an Anycubic Photon. These can be a challenge to print. Note that these wheels may not work on all cars. Category: Toys…
These wheels were created as replacement wheels for hotwheels/matchbox cars. Please note that the wheels may not work on all cars. I have included the Rhino3D design files if anyone would like to modify the design. Category: Toys & Games
Make sure to like and follow and share your makes :) This display is based on the actual elevator in the audi museum in germany it will require assembly and gueling once printed unfortunetly but it will make a beautiful addition to your…
Thanks @PlayRobotics_160216 :)
![[128mm wide] Hot Wheels/Matchbox Diecast Car Display - Modular](https://media.printables.com/media/prints/0e96f77c-d5d6-4caa-92f4-039302f5fa53/images/12952540_7af38c23-6af9-442f-8a28-f74bf0014067_3b6bc13b-b0f0-4b25-8831-6f2d97ff5877/pxl_20260513_212138710night.jpg)
