1/64 Diecast 180 V3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A three lane 180 turn, this is a rebuild of a 1 year old turn using all the things i've learned in the last year. It…
- Ocena
- 0 / 5
- Polubienia
- 46
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 1508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
A three lane 180 turn, this is a rebuild of a 1 year old turn using all the things i've learned in the last year. It allows for smooth 180 racing across 3 lanes. Cars with poor clearance do just barely high center in the middle but they still perform well overall.
I print these pieces pointing up with no supports, if your cooling isn't up to par you may have some problems with the parts pointing up in the air.
You will want to print:
- 1 each of the Left and Right Entry, Mid, Back
- 15 of the slim connectors
- 6 of the HW track connectors (you can use normal hot wheels track connectors as well.
See this curve in action: https://youtu.be/BUgLgFlRq9E
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.28 layer height
Infill:
15
Filament: Overture PETG Doesn't matter
Notes:
I like 2 walls, 15% infill, 4 top and bottom layers, i print in petg as i like my pieces to be left outside in the sun and i want to minimize the risk of them warping.
Category: Toy & Game Accessories