Liczymy pasujące modele…
This is a compact, all-in-one spell tracker board for D&D 5e spellcasters. It features: - Spell slot sliders - A toggle for concentration - Adjustable dials for Spell Attack Modifier and Spell Save DC - A nameplate slot for displaying…
Double-sided parallel switches track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
When my kids were younger, they were totally hooked on Marblelympics. So I designed this marble ramp for them to hold their own marble races. There's also a fan stand for all the marbles to sit and watch the games, and a podium for the…
KATO Unitrack Rail Clips. To secure the rails to the building plate without glueing the rails themselves Printing I printed with PLA, 0.2 mm layer height. Assembly Slide the clips under the rails. Use glue under the clip or screw the…
One Piece T-Track 4-way Intersection Perfect for woodworking jigs, sleds, assembly tables, CNC, downdraft or other work table tops. Instead of paying upwards to $25 per intersection on your assembly table, just print your own for a few…
Hey guys, this is a spool holder meant to be installed in its track. Its designed so that the weight keeps the arm in the track, and you have to lift up and tilt nose up to pull it out. The printable track is 202mm (8"ish) across, and…
Make a full set of mountain lion paw print impressions in the ground! Suitable for teaching kids animal recognition or tracking. Recommend using water to soften the dirt as needed before making the impression.
This is a small camera mount for the valve index. Originally designed for a OV2640 with a XIAO ESP32S3 mounted inside of the headset. I run this with project babble. To install this, you need to cut a bit off the plastic on the seam…
I made this counter to firmly slide over the lid of my water bottle, so I can keep track of how many bottles I drink per Day. There are Magnets in bedded in the print.
Hello all! Wanted to share this here and let you all know that this was a labor of love and would LOVE to see what yall can do with the blank pieces for different cases/games! The original design was meant specifically for tabletop TCG's,…
On my Dell 7450 the keyboard was faulty, ordered a new one. Now the original, with the extra buttons was £45, without the buttons (slightly different model) £15. Since I never used that, I printed a cover and saved £30. I used Galaxy…
TrackVision - The Open Railway Project Welcome to the TrackVision ecosystem! This is a comprehensive, custom-designed model railway project built from the ground up for makers. It features a unique, non-standard scale engineered…
This is a replacement feet for Technics linear tracking turntables. I know for sure it works with SL-J1 and SL-J2, but I suspect it is compatible with all linear tracking models. It reuses the original spring and screw and is designed…
Introduction 2025 is the 10th anniversary of the infamous Benchy Test Boat. To celebrate, I connected my love of marble runs and designed this track. Combined with a spinning elevator, an arm extends from the motor and pushes the Benchy…
I made this as a physical tracker and fidget toy for use with Zelda Ocarina of Time randomizer. It tracks Medallions, Dungeons, Dungeon Entrances and Bosses for use of Boss and Dungeon Entrance shuffle settings. I'm using…
This 3D-printed Tabletop RPG Counter is a practical and customizable tool for tracking life, stamina, mana, spell points, or any resource used in your RPG sessions. Designed for tabletop players who want clarity and convenience, this…
for use with a usb cable for power, Check the photos for the dimensions of the clip for the tracking software
I made this as a physical tracker and fidget toy for use with Zelda Ocarina of Time randomizer. It tracks Medallions, Dungeons, Dungeon Entrances and Bosses for use of Boss and Dungeon Entrance shuffle settings. I'm using…
Use this to hid your cables running up the wall and clean it up a bit. Print it in a color that matches your wall. The domed cover prints best standing vertical. Use glue and a skirt to print the best. Screw the wall base to the wall with…
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
A looping for the custom track. This is not compatible with Tamiya manufactured track. Use the connectors and straight pieces from the original design to make a stable assembly. Printed with a 0,4 mm nozzle and 0,3 mm layer height. Note…
Bender's bigger, badder brother is here! Meet Flexo, the most flexible Meshtastic powered node "case kit" available… and its FREE to print! Check out the intro video HERE and the teardown video HERE . ***ASSEMBLY VIDEO NOW LIVE CLICK…
Lots of parts, many moving pieces, some tiny pieces, but fun to assemble if you like a challenge. Will add some additional decor later. While you can print at whatever detail works for you, this was printed at .2mm layer with the…
When installed on this adapter, the base will be angled at 7 degrees from the cockpit mounting plate. To lock the base in front, you will need M6x18 screws (I had them with washers), and M6x10 screws for the back (included with the base).…
This universal connector, to its special design, fits all popular wooden railway tracks. Compatibility: IKEA Lillabo BigJigs LIDL train BRIO According to the license, you can also use these files commercially, but according to the…
A simple screw-on under desk holder for the Magic Keyboard and Magic Trackpad by Apple. As all available solutions did not met my expectations and my space, I specially made one for narrow space under the desk with a turned holder for the…
Do you have a tesco crate box hanging around that is not finding any use? Do you ALSO have a bike with a topeak pannier rack on? Well do I have news for you my friend, with this nifty device you can turn your old green box into your BRAND…
This allows repeated realignment of a T-Track fence or other jigs to a set position. This is useful for a sliding carriage fence such as the type used on Paoson's Mobile Workbench with Table Saw & Router . Use it much the same as a ruler…
I designed a custom mount to securely position my security camera near the roof, specifically for attachment to a 90mm diameter roof downpipe gutter (adjusted to 88mm for a snug fit). The mount consists of two parts: 1. Part 1 : A simple…
I think my version of the toy is over 20 years old so i dont know if the dimensions are still valid. Diameter: 69mm Stem Diameter: 3mm Width (without stem): 16mm Has to be printed twice and glued together.
Created to connect to a corner cubical framework to hide wiring.
Kept the back open as I can only imagine the rage kids will get when the car doesn't come out. So this model was made for my under 3 years old son. Who loves to build playtive car tracks. Used the the base to fit for it. No supports nor…
Update (2025/02/01) : Minor edits to lid, specifically made the screen hole smaller and extruded a hollow box to prevent items from ingressing via the screen hole. Parts needed : 1xLid. 1xBase. 2xButtons. 4xM3x10 screws. Depending on your…
I know there are some tracks already available, however, they were way too big for my truck, not very scale and you need additional hardware. Also if your axles have caster these other tracks won’t fit. With my design you only need: 24…
KATO Unitrack Rail Clips. To secure the rails to the building plate without glueing the rails themselves Printing I printed with PLA, 0.2 mm layer height. Assembly Slide the clips under the rails. Use glue under the clip or screw the…
This was designed for a cubby which is 20" wide and 15" deep. The LED's stick to the “channels” (pointing down at a 45 deg angle) and the channels stick to the intersection of the cubby walls and ceiling. The diffusers slide into the…
Took inspiration from https://www.printables.com/@Jerryie and started cutting up vehicles from https://www.thingiverse.com/thing:3553160 It is scaled to 1:72 same as https://www.printables.com/@Jerryie tanks.
With this track you can build space effective points fields to enter all your platforms of your train station. Optimiere dein Weichenfeld vor dem Bahnhof: mit dieser Bogenkreuzung kann eine 90° Kurve in eine Doppelweiche ausgebaut werden.
Clips onto the monitor. Made specifically for the G95SC.
Printed in PETG Nozzle Ø: 0.4 Layerheight: 0.25 supports needed for the T-slot connector and the bottom hex cutout
I purchased a LoRa module from Amazon to get started learning about Meshtastic, and I realized after receiving it that I needed an enclosure for it. I didn't realize how easy it would be to set up. I would assume if you're here you…
You may need to heat up the camera mounts so you can bend it to make the camera fit easier. A little late to mention but the camera mounts fit my 160 FOV cameras, its a tight fit, I'm not sure of the compatibility with 130 FOV cameras.
Rings to track which mini is which during combat with multiple monsters of the same type in DnD or other TTRPGs. Write the numbers on the little tab. Then, during combat, put the rings on the minis so you don't lose track of which is…
A 180 degree 1/64 Diecast Car Track, now setup to use male connectors - printable in PLA or PETG - track is obviously female. This can fit on a Prusa Core One or A1, P1P/S/X1C, Centauri Carbon etc. Recommendation I recommend the…
Bring a little Easter magic to life with this fun and simple 3D-printed Easter Bunny footprint stamp ! Designed to create rabbit tracks in snow, sand, or soft ground , this single paw stamp lets you “lead the way” for the Easter Bunny…
Introduction The racetrack tuner is a capacitive coupler for short transmitting loop antennas. The name is refering to its racetrack form. Racetrack Circus Maximus in Rome - maybe I should call it ’Maximus Tuner’ :-) For use by certified…
Updates: 2026-04-30 Added STEP file. Its gigantic because it has some of the original STLs in it also. 2025-05-10 updated v1.1 of Gearbox-part-1-2-Combined (with and without letters) enlarged hole for the intervalometer port to 5.6mm. The…
Introduction 2025 is the 10th anniversary of the infamous Benchy Test Boat. To celebrate, I connected my love of marble runs and designed this track. Combined with a spinning elevator, an arm extends from the motor and pushes the Benchy…
You can use this in train tracks or standalone and use this together with my other track tile pieces or the 4dbrix monorail tiles straight and ramps elements Also check out the rest of my monorail designs, including motors, stanchion and…
If you're here for a Valve Face Tracker Mounting solution that's nice and sturdy you've come to the right place! Just download the Frunk replacement, swap it for the current one, and then you're good! However if you wish to assemble your…
Editable H0 Rail track for the Rail King toy set. Editable 3mf and STL available! Ready to print for PLA and PETG. Enjoy! Category: Toy & Game Accessories
Since I started working on small scale solar power plants, I continued to search for ways to increase the energy yield of the two to four solar modules. The “Sunchronizer D1" Dual Axis Tracker is a solar module holder with which…
Ryobi track saw guide / rail wall mount. Screw holes are 5mm in diameter Filament I recommend , PETG, ABS or ASA. Personally i've printed it in Bambulab PETG HF Print Settings Orientation like the picture. Layer height 0.2mm 3 Walls…
The test print elongated and with a bolt hole for a ¼ -20 bolt so i could use it as a tie down for kick back device. printed upside down. 25 % infill 4 walls. the bolts are an extremely tight fit, and will seat inside when tightened down.
Replacement tracks for Micro Machines trains. Tried printing and aligning with my official pieces and they fit together well enough. Available in 3 sizes; 113mm (original), 53.5mm and 11.8mm. Measurements aren't exact. 113mm piece also…
Thomas & Friends Wood Train Track 2018, straight, curve, cross
Race track safety system for 1/76 - Turbo Racing rc car Collections available Losi MicroT Spinner & Fidget Arrma RC Earrings
These modular red and white barriers are designed to enhance your miniature RC tracks like Turbo Racing or 1:76 scale dioramas. Inspired by real-world racing curb barriers, they help define corners, protect from off-track excursions, and…
Made a small 1x1 Gridfnity storage for my UGREEN FineTrack Smart Finder. Designed it so that i can find it the next time
A simple clip-on for Track IR motion reflectors to allow mounting on HyperX Cloud family headphone's bridge. The mount is designed in a way that the metalic clip of Track IR reflectors is slid into the tray from the front (the clip is…
Lleva el diseño de las pistas de Formula 1 de este año listas para imprimir para poner en imán, como suvenir o llavero. combinan todas y tienen un relieve para cambio de color y hacer un contorno mejor. Prueba para ti o para vender! Hecho…
I needed a good way to mount LED strips on shelving racks that I keep my printers on. Because they were metal, I thought magnets would offer the most flexibility. I also wanted to be able to angle them at 45 degrees so that they projected…
I found some Rubbermaid Fast Track rails at a local ReStore a while a go for a good price. But they didn't have any hardware, and after going to Lowe's and seeing they were $15-25 apiece I decided I could make my own. I copied the profile…
Astrotracker H1 is a DIY star tracker camera mount for astrophotography, made to open access to astrophotography without needing to purchase a more expensive star tracker. Includes a multi-axis rotational gimbal, automatic North Pole…
Tactile way of tracking player trackers like: Hope, HP, Armor and Stress. Max range for each counter that can be tracked is 15. Most of the values in Daggerheart cap at 12 but a maximum of 15 is possible with the right combination of…
Intro A discreet 3D-printed mount for your Apple Airtag, designed to be installed under your bike saddle. Minimalist look, rock-solid fit – perfect for keeping track of your bike while riding or parked. Ideal for road cyclists, MTB…
These ready to print drop-in inserts will help you convert your Ploopy Rev. D from using the standard roller dowel style bearings to 2-mm ceramic G5-grade bearings. It may work on earlier revisions of the Ploopy, but this is not the STEP…
My kid broke the tracks on the wall-e toy that was sold by toys r us. It's been discontinued and he was devastated so i made these. worth the time to see his face lite up when it was fixed. Print Settings Printer Brand: Prusa Printer: I3…
This is a US M3 Halftrack with a Stuart Turret and mech legs. There's two types of legs
A small case for the picotracker. Good for protecting it from scuffs and dings, especially if you carry it with you. I wanted it to be totally usable without needing to remove it from the case, so all ports are accessible without needing…
wanted to use this model for a wall of bookshelf + hotwheels display for a kindergartener
Sd.Kfz.8 Half-Track. All the pins and holes require some filing. The photo shows it towing a PaK 40 75mm. Most sources say it was used to tow a heavier gun. The new modified front axle 8, steps 9 and rear panel plug into the chassis A…
Similar to the stock case with the following changes Optimized for FDM printing cover prints facedown with no supports longer body with room for 3000mah battery requires 2mm heat set thread inserts added place for 2.5mm heat set thread…
Experience the ultimate in track performance with this 3D printable STL model of the Mercedes-Benz AMG GT Black Series 2023. This track-focused supercar model is perfect for automotive enthusiasts seeking to display the aggressive…
Hello all! Wanted to share this here and let you all know that this was a labor of love and would LOVE to see what yall can do with the blank pieces for different cases/games! The original design was meant specifically for tabletop TCG's,…
Ignite your space with the 🔥 SnapGlow Modular LED Track System! 🌟 This clever 3D-printable design lets you snap together tracks in any direction for epic custom lighting! 💡 Each piece features a groove for LED strips 🎨, 2 chamfered 3mm…
Just a Smuk3D brio compatible remix. I needed shorter versions. Print Settings Printer: Print Rite DIY Rafts: No Supports: No Resolution: 0.2 Infill: 20 % Notes: Printed in PLA with 4 perimeters and 4 top/bottom solid layers. Category:…
A vertical stand for the M-Audio M-Track solo and Duo audio audio interfaces. Leaves perfect accessibility to all interface, knobs, buttons, and ports. Very minimal wobble and great stability.
Housing used for Arduino Nano Head Tracking Project Followed these instructions https://headtracker.gitbook.io/head-tracker-v2.2/ Video of end product:
Three variants, two with 4x2 on both sides, another with 2x2. The total width of the plates and track spans 7x2, 7x4, or 9x2. Fun to make little tunnels and archs with the blocks over the track. I generally find printing lego/duplo style…
First atemp at designing a model. Printed fine at 0.12mm with matte gray PLA
Halter zur Aufbewahrung von JBL Tests fürs Aquarium und ein Halter zum trocknen der Testfläschen, Spritzen etc.
90° and 45° guide for youtool brand saw rail
This piece of track has a center line radius of 248 studs and an arc of 5.625°. A radius of 248 studs was chosen because it is close to the radius of the “Long Smooth Curves” technique created by Holger Matthes…
I’ve designed a new holder for the barrier of the Carrera 132/124 track — one version that clips in place and another that clamps on. The holders are compatible with the original Carrera barrier and are much easier to attach. In addition,…
Pretty simple bracket that will fit a Milwaukee track saw to get it up on the wall and out of the way. I printed mine in PETG. This is printed in a way such that the saw is inserted upside down. The only reason for that is that…
The nut holders in the original design are too tall and block the Makita cordless track saw. I redesigned the nut holders to be slimmer and fit well under the saw. Also, the bolts need to be only 1 and ¼ inch long (not 1 and ½)
English The idea was to create a tunnel portal similar to the detailed Noch Profi Tunnel. It is designed and scaled to nicely fit two tracks in H0 scale. I recommend to print it horizontally (obviously) and use only one or two bottom…
Brio/ikea female-female train tracks bending 90° across multiple heights. They fit on a Prusa XL build plate. The millimetres in the file name means height delta.
I made a tank track for 1:70 scale tanks, or models that I print from other people, that I just scale down. it should be more reliable and easier to print with .4mm nozzles. The people that i print from are Bavaria_3DTanks, mikolaj.mazik,…
I made spare tracks for the LESU rc skid-steer, because it had to much grip on carpet or hard surface with the original tracks. Due to the high grip level of the original tracks, they often slip off the wheels when i turned the loader.…
This 3D-printed Tabletop RPG Counter is a practical and customizable tool for tracking life, stamina, mana, spell points, or any resource used in your RPG sessions. Designed for tabletop players who want clarity and convenience, this…
For some reason the excellent model by @m98custom1212 (thanks for sharing it) came out a bit loose so I decided rather than experiment with scaling the print, I made a couple mods to the step file. You can see these on the picture below.…
BEST WITH 4x M3 Button Head screws , I used 8mm but length doesn't matter all that much. The setup will function without the screws, but I wanted no risks of detachment. I am using the Magic Trackpad Gen 2 with Lightning Port (Model…
