1 / 1
Makita / Festool Track Saw Guide Rail Holder — zdjęcie 1

Makita / Festool Track Saw Guide Rail Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sturdy mount for a variety of track saw guide rails. Use a pair to hang a rail on the wall, garage door, etc.

Ocena
4,955 / 5
Polubienia
331
Pobrania
2292
Wydruki
31
Wyświetlenia
8604
Oceny
22

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Complete redesign of 3DDIY's nifty print-in-place guide rail holder. As I wanted to hang my rails on a garage door, I needed something a bit stronger and more secure. Also wanted to be able to mount these with the rubber strip facing up to avoid damaging it. So I designed a two-piece version that is much more akin to the "inspiration" FastCap product that you can buy for $20+ per pair.

Pretty self-explanatory. Print one base and one nut in the default STL orientations (flat for the nut and on the side for the base). This will give the best strength and will require no supports.

Assemble base to nut with one M6 x 20mm hex bolt and nut. You can play with the orientation of the M6 nut and/or bolt to insure that it is "tight" when the holder's nut is in the down/locked position.

Designed to use a pair of 1-1/4" pocket hole screws for mounting, though obviously any similar flat-bottom screw will do.

I suggest ABS, PETG, or other more structurally sound filament. I printed these with PETG using a 6mm nozzle at 0.28mm layer height and 3 walls. Plenty strong. Super pleased with how they turned out.

Enjoy!

Tagi