1 / 1
Makita / Festool Track Saw Guide Rail Holder — image 1

Makita / Festool Track Saw Guide Rail Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Sturdy mount for a variety of track saw guide rails. Use a pair to hang a rail on the wall, garage door, etc.

Rating
4.955 / 5
Likes
331
Downloads
2,292
Makes
31
Views
8,604
Reviews
22

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

Complete redesign of 3DDIY's nifty print-in-place guide rail holder. As I wanted to hang my rails on a garage door, I needed something a bit stronger and more secure. Also wanted to be able to mount these with the rubber strip facing up to avoid damaging it. So I designed a two-piece version that is much more akin to the "inspiration" FastCap product that you can buy for $20+ per pair.

Pretty self-explanatory. Print one base and one nut in the default STL orientations (flat for the nut and on the side for the base). This will give the best strength and will require no supports.

Assemble base to nut with one M6 x 20mm hex bolt and nut. You can play with the orientation of the M6 nut and/or bolt to insure that it is "tight" when the holder's nut is in the down/locked position.

Designed to use a pair of 1-1/4" pocket hole screws for mounting, though obviously any similar flat-bottom screw will do.

I suggest ABS, PETG, or other more structurally sound filament. I printed these with PETG using a 6mm nozzle at 0.28mm layer height and 3 walls. Plenty strong. Super pleased with how they turned out.

Enjoy!

Tags