Brio/Ikea Elevated Train Track Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ramps and track supports for building an elevated track with Brio/Ikea compatible train tracks
- Ocena
- 4,538 / 5
- Polubienia
- 490
- Pobrania
- 2766
- Wydruki
- 40
- Wyświetlenia
- 9252
- Oceny
- 39
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This set includes two ramps and a trestle style support for building elevated tracks. The ramps are a bit too steep so most trains with scrape a bit when going up or down. But I wanted to make the ramps tall enough that trains could fit underneath them and this is the best I could do with the Prusa Mini bed size. Perhaps the next iteration will have a two-part ramp at a lower angle.
All parts can print without supports. No issues at all with the ramps. The trestle supports can be a little tricky. Printing them one at a time and using a brim around each foot I've had good success. I tried to print two at a time without any brim and had some failures.