Liczymy pasujące modele…
Simple sleeve cover for Logitech BRIO webcam. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.1mm Infill: Standard Notes: I rotated flat side down to print avoiding rafts or supports. Might print…
This model is for a Brio compatible as well as Duplo compatible train car. It's based on a 6x2 Duplo brick and has magnets on each end to mate with existing Brio cars. Each car requires the following printed parts: 1 Body, 4 wheels, and 2…
I used a couple of m3 screws to tension the bits together and it seems to hold my brio webcam pretty well. Not perfect but functional. Should work for other cameras with a similar ¼-20 mount Edit a while after: Recommended to print in…
These buffer stops will keep your wooden trains from running off the ends of the rails. All pieces print without supports. Feel free to message me if you need a custom size, and click here to check out my other train designs. Update 17…
This can be used to store the rail segments of the brio train in a neat way. It can store a stack of rail segments on both sides. There are STLs for several stack heights. I found the idea from this model for duplo rails , which also…
Storage for up to 8 wooden trains for BRIO, IKEA with max. size of 45mm x 105mm Requires: 2x Screw M4 x 30mm (better M4 x 40mm) 6x Magnet Ø6mm x 3mm
Mein Sohn bat mich ihm Prellböcke für die Brio zu drucken. Eine Nachbildung der von Brio erhältlichen, fand ich nicht so toll. Daher habe ich selber welche konstruiert. Ich habe es mit PLA probiert und 20%. Hat gut funktioniert. Der freie…
No support structures needed. ************************************************************************************************ Feel free to cantact me if you have any questions or ideas for improvement.…
No support structures needed. ************************************************************************************************ Feel free to cantact me if you have any questions or ideas for improvement.…
No support structures needed. ************************************************************************************************ Feel free to cantact me if you have any questions or ideas for improvement.…
This is a brige column to elevate the train tracks to the usual brige height. It's compatible with most track pieces from Brio, Ikea Lillabo, and Playtive. Ideally printed with adaptive layer height, using less than 0.2mm for the top…
I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…
A 90-degree bridge ramp for wooden train track that allows train cars to transition smoothly between different elevation levels while making a quarter-turn (90-degree) curve. The curved design makes this piece ideal for smaller play…
A bit of party fun, enhance your woode waggon from Brio with an adapter for schnaps glas! Fits tight. Put your schnaps on top and let the schnaps drive to your guests. Print standing with the 45° chamfers pointing downwards.
I made some modifications: Added shorter double-sided version, tracks on both sides. Added shorter version double female connector. Changed connectors as in .pdf file just to be sure (fits Smuk3D's files) Print Settings Printer: Print…
I needed also a smaller version than the original. So I remixed it to be 1 and 2 mm shorter. Print Settings Printer: Print Rite DIY Rafts: No Supports: No Resolution: 0.2 Infill: 15 % Notes: Printed with 4 perimeters and 4 top/bottom…
Another nice locomotive design on which I made some modifications. Changes from original: -most of the parts are assembled together -thicker cabin walls -chimney positioned to boiler center -adjusted tolerances on printable axles -added…
Three variants, two with 4x2 on both sides, another with 2x2. The total width of the plates and track spans 7x2, 7x4, or 9x2. Fun to make little tunnels and archs with the blocks over the track. I generally find printing lego/duplo style…
Wooden railway passenger car - Brio compatible Parts required: 2x magnet Ø 6mm x 3mm 2x M2 x 10mm screw 9x M2 x 4mm screw Building instructions Step 1: Install the rotation axis for the boogie Step 2: Fix the rotation axis by use of a…
Brio/ikea female-female train tracks bending 90° across multiple heights. They fit on a Prusa XL build plate. The millimetres in the file name means height delta.
WELCOME! PLEASE READ This model has been tested through several variations so that all tolerances are correct and the action runs easily and smoothy. This model SHOULD BE USED WITH A 608zz BEARING ON THE MAIN DRIVE GEAR. These bearings…
These are some pieces that should be compatible with both TRENCITY (Argentinian counterpart) and BRIO train sets. I've always wanted more parts so i could let my creativity run wild. I used trencity measurements but the parts should be…
The reduced inclines means our electric trains can now drive up without failing. Its increased in length but still fits on the pretty standard 250mm build plates. You can use the trestles of the original. So one of our 2 trains can go up…
Functional, very flexible track, I tried it, it fits all types of wooden tracks. In some places the print can be damaged (the print shrinks for no reason), I don't know why, but most of the time the print works and holds.
Brio connector, two sizes (10 mm and 12 mm). 10 mm - the size of the wooden track, fits perfectly. 12 mm - for connecting imprecise tracks where the hole is smaller than 12 mm and for connecting printed tracks (same reason)
Este brinquedo de impressão 3D é um jogo de equilíbrio projetado para desafiar coordenação motora, controle e precisão. A base curva cria uma gangorra instável, tornando cada movimento estratégico. O jogo pode ser disputado por um ou mais…
I had to repair one of these with a broken leg during the local Repair Café that I attend regularly and thought that it would be better to 3d print a replacement than to repair a flimsy leg! The sides screw into a 150mm straight section…
To use this you'll need to remove the stock mount. Behind the webcam, on the hinge, you can remove a couple rubber stoppers to expose a screw which can be removed. Push out the plastic plug, keeping the screw and plug. The printed part…
Basic replacement models for missing parts from the BRIO Railway Crossing set. I have never seen the original parts, so these models were designed as robust functional replacements rather than exact replicas. Barrier Gate Best printed on…
Design Concept This is a completely redesigned version of my older model. It offers completely new options and improves the original features. Now there is no need to glue anything (except the magnet), it is more compact and easier to…
Little story about this model: I bought broken Brio Train station toy second hand. The battery cover was missing and it looks like someone was opened the battery cover without screwdriver, so it was totally messed up. Luckily the hingepin…
This is a simple storage solution designed to keep your Brio rail connectors organized. The box is designed to hold up to 5 connectors in a vertical stack. Note: Work in Progress Please be aware that this model is currently a work in…
(english below) Universeller Halter für den Sensor der Außentemperaturanzeige passend für Audi 80 / 90 (B3, B4), Cabriolet/Coupe (Typ89), Audi 100 (C3 Typ44, C4), Audi 200 (C3 Typ44), Audi V8 (D11) und weiteren Modellen. Vergleichsnummer…
Jeden z krásných modelů Praga BABY - varianta kabrio. Dále byla varianta Praga BABY BA coupe.
Design Concept This base adapter is created to connect Brio wooden train tracks with Duplo building blocks, enhancing versatility in train set setups. Purpose The adapter allows children and hobbyists to seamlessly integrate different toy…
Audi 80 OEM switch frame for behind the centre console switches - 893941567B - printed in ASA because I hate PLA for parts :) Recently broke mine removing the dash, someone might have a use :)
This small station prints in three pieces and is glued together to minimize color swaps. The roof sections should be printed with the flat of the roof on the build plate. If you like this model check out this collection of my other toy…
Brio 101 bracket remixed for the Multifunction Arm System.
You can remotely control gates powered by N20 DC motors. It is accompanied by warning lights - flashing two red lights or when the gate is open, one white flashing light (used in some countries). There are two versions, one track two…
I've build a toy train (BRIO / IKEA compatible) that I've made for my son. This is the older model with 2 types of screws - the newer ones are far better designed and use only 1 type of screws for everything (check the link to my premium…
Design Concept These couplers are created to connect brio-style trains, enhancing versatility in train play setups. There are two types of couplings. First is classic but with more endurance, second is new type. In that is not necessary…
Suggested print settings: Print with 0.15mm layer height or lower for a smooth ramp.
A 150mm bridge rail piece for wooden railway systems. Add elevated sections to your layout for more dynamic play. Compatibility - BRIO, IKEA LILLABO, Thomas and Friends (wooden), Melissa and Doug Print Settings - Layer Height: 0.2mm -…
Kompatibilní se stavebnicemi Lego a kolejištěm Brio a Ikea. Ze spodní strany kolejnice jsou výstupky pro spojení s kostkami Lego. Koleje je možné mezi sebou spojovat deskami Lego. Pro napojení na kolejiště Brio je možné použít speciální…
Incrocio auto-progettato a 8 vie compatibile con piste Brio, Ikea ecc... Riuscirete ad evitare scontri???
My kids have mixed all their Pokemon playsets with their wooden tracks and I decided to make a Pokemon themed train station to bridge the two worlds. I printed the canopy with the long, thin side down with a large brim and support. I…
My kids broke out the wooden Thomas tracks recently. We had plenty of tracks, but we are lacking in destinations. I made this water tower. It's an iconic item for the old rails. It was fairly simple to draw up and print, but I couldn't…
This is a destination for wooden railways. I wanted something simple. A platform the little magnet crane truck could drive up and unload a train car with. I went with the double track so you could add a siding curve. I made it to match…
This is a bit more ambitious design the the train station. It uses the same base track. The silde rail moves, the crane can swivel 360 degrees and raise and lower. I designed the lifting hook around a 3/8" nut. It's enough to draw the…
My kids wanted a station or building for the wooden tracks we have. I modified a track here: https://www.thingiverse.com/thing:1938409 for the base. I tried to tag this as a remix since I used atoomnet's 144mm double track as a base for…
My sons got these Brio trains that are much longer than the standard engines. So they don't fit on the tiny round table that we have. I desgined this in Solidworks, using a cross-section of a straight track to make it. The track width is…
My printer can't quite fit the large inclines (p&q), but we do have some of the inclines that don't have supports. so, I chopped up parts from jayftee's train tracks set to make a properly sized riser. It's hollow and prints without…
Design Concept The Tiny Train Brio/classic brick Adapter is designed to connect traditional wooden toy tracks with compatible brick systems, such as classic brick, allowing for expanded creative play experiences. This version is created…
Hello Everybody, I changed a little bit of Smuk3Ds Rail Crossing. ATTENTION: The gate and the pillar have to show a V when you are pushing it together. My kids are loving their new toy hope that your kids will love it, too. Happy Printing…
A shipping container that will fit on Brio, Ikea, etc train cars. An M5 bolt goes in the hole in the top so it can be lifted with magnetic cranes and the like. If you like this model check out this collection of my other toy train models.
Update 2024.01: Added the S-Connector and extra long version for those tracks that just dont fit. Newly designed to be a rapid print and low material version of the loved track sets. If you have these train sets, you know that these…
Arched Brio ramp, in addition to my Brio collection. https://www.printables.com/model/279651-brio-brio-brio-more-than-20-rails-and-switches You can print it without top and bottom layers. I've sliced mine into 2 parts – have a look at the…
I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…
Liquid detergent tray (for clothes washing machine) Manufacture/model: Whirlpool Cabrio Manufacture Manual Notes: Manual states that for liquid detergent you need this liquid detergent try and for powder detergent, to remove it. Without…
I put these together for a Brio project I'm working on, but maybe they're useful to someone on their own?
I made a smaller 170mm version as it fit better on my small printer, there is a larger 208mm version.
I made this adapter for the Elgato Prompter to interface with my Logitech Brio Webcam. The webcam fits snugly in the adapter and rests against the pegs on the inside. I printed it with supports with generic black PLA. A black filament…
Spoked wheel / Speichenrad for wooden railways - for shaft diameter of 2mm (free running) Category: Toys & Games
This set includes six variants of curved tracks, with the short curve, standard curve plus additional multiples of the radius. All variants fit seamlessly next to each other, making them perfect for building nice parallel tracks or…
The 4-in-1 wooden train storage box has four functions in one. It can be used … … to store wooden trains clean and safely, also for transport. … as display socket. … as bridge … as advanced track with dual “polarity” There are two tracks…
This model is for a Brio compatible as well as Duplo compatible train car. It's based on a 6x2 Duplo brick and has magnets on each end to mate with existing Brio cars. Each car requires the following printed parts: 1 Body, 4 wheels, and 2…
This is a simple railing add-on to an existing track piece when used as a bridge part. Two variants provided for the two standard track piece lengths; 13cm and 19cm. Holes are suitable for 3mm screws. Drilling needed in track part to…
A patron requested a replica of this wheel, so we made one. Should be accurate down to about 0.1mm or so, but also keep in mind that the dimensions are as-is, there's no additional clearance worked into it other than what the original…
With the circular viaducts, the standard Brio bridge height can be reached in a 270° turn. A variant for driving up and down is available for download. The two circular viaducts are designed in two parts so that they can be printed with…
Mounting a Logitech Brio 4k to a tripod using a ¼ insert thread and a threaded end M4
H0 Tunnel 1:87 works for Märklin C-Gleis and other brands like Roco, Fleischmann, Piko. H0 Tunnel, single track, with small windows and without windows, connectable with connectors. Length of the tunnel is 195mm (~7.7in). Caution: It is…
Volkswagen Beetle Cabrio This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
This is a convertable track for wooden railways. Requires 4x M4 x 20mm screws. Further information and instructions can be found here: https://holzeisenbahn.schreinerman.de/chamaeleon-gleis
FIAT 500 Cabrio This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
Our grandson loves everything trains so we made a Booville Express train for him to play with for the Halloween season. We used three of the reduced sized (remixed) pumpkins for the cars and shrunk one down even more for the smoke stack!…
Its self explanatory, it's just a simple holder for the webcam against the door of the printer to record the prints. I passed from several iterations, but at the end I keep it as simple as possible, no only for easy print but also because…
This is a remix of a remix from Thingiverse! I needed a small railroad crossing with gates for my grandson so after printing the original ( https://www.thingiverse.com/thing:4745728 ) it was just too big for what we needed so I remixed…
License plate with multicolor possibilities. Each letter and the car logo is created as separate objects - allowing you to select what ever colors you like. Download the “.f3d” file to modify the text. Made as a gift for a friend
LEGO Cybertruck cabrio - Elon Musk This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
LEGO Trabant Cabrio This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
LEGO VolksWagen POLO This is a model compatible with the LEGO system. Just print it, attach a LEGO chassis, and you're ready to play. Very easy, very simple.
This is a tunnel portal (tunnel door) for the existing tunnel elements . It can be connected with the given connectors. It is symmetrical. Connecting two tunnel portals creates a micro-tunnel. H0 Tunnel 1:87 works for Märklin C-Gleis and…
Big things happened and Krokodil Ge 6/6 RhB version 2 is coming. A building instruction can be found here: https://holzeisenbahn.schreinerman.de/ellok-ge-6-6-rhb (translation via the yellow translation button)
You cannot mount a light bar and a webcam on top of a screen, as the mountings and cables can get in each other's way. So you have to stack the two devices somehow. In this case, a Xiaomi Mi Computer Monitor Light Bar and a Logitech Brio…
Adapter for wooden train tacks for building custom bridges or slides. When using two parallel rails, one with large radius and the second small, the ideal distance between two Adapters is 4 Duplo or 8 Lego studs (see image)
Does your child ever need just a few more track pieces or a track piece that doesn't exist? Now you can fix that with 3D printing! There are currently 30 track shapes, with 199 unique variants! Track types: Straight 39 variants (length,…
The original rubber adapters that hold the lens get brittle, are hard to find and quite expensive. 3D print some in TPU instead! I recommend a softer TPU and 100% infill Includes both sizes. A 19 mm large one, and the small 12.5 mm one.…
