Train Tunnel for BRIO - Mountain with overpass V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mountain with a tunnel, additionally there is an overpass
- Ocena
- 5 / 5
- Polubienia
- 244
- Pobrania
- 1358
- Wydruki
- 25
- Wyświetlenia
- 4838
- Oceny
- 26
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a tunnel remixed from my remix of BasD's "Model Train Tunnel".
The tunnel is scaled to fit common wooden train track systems (e.g. BRIO, IKEA etc.) and has a flattened bottom and an overpass that crosses the mountain perpendicularly.
There is an additional track of 162mm (in BRIO terminology A1+A2) length that locks into place with the tunnel.
As seen in the picture the tunnel realy pops if you print it multi color or paint it afterwards. Very nice examples can be found in the “makes” are of the source part. Printing in multi color on a X1C with AMS took about 22h with minimal tree support. I used three outlines, adaptive lighning infill and variable layer hight for the deatils, 4 bottom and 7 top layers.
IMPORTANT: YOU ARE NOT ALLOWED TO USE MY DATA FOR COMMERCIAL PURPOSE (E.G. for your ETSY or EBAY) WITHOUT MY CONCENT. VIOLATIONS HAVE BEEN AND WILL BE PERSECUTED