Brio/Ikea Elevated Train Track Set
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.76 – €5.82 net (excluding VAT)
For file: train trestle_0.15mm_PLA_MINI_6h21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.29 excluding VAT (range midpoint).
- Weight reported by the author
- 44 g
- Print time reported by the author
- 6.35 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Ramps and track supports for building an elevated track with Brio/Ikea compatible train tracks
- Rating
- 4.538 / 5
- Likes
- 490
- Downloads
- 2,766
- Makes
- 40
- Views
- 9,252
- Reviews
- 39
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
This set includes two ramps and a trestle style support for building elevated tracks. The ramps are a bit too steep so most trains with scrape a bit when going up or down. But I wanted to make the ramps tall enough that trains could fit underneath them and this is the best I could do with the Prusa Mini bed size. Perhaps the next iteration will have a two-part ramp at a lower angle.
All parts can print without supports. No issues at all with the ramps. The trestle supports can be a little tricky. Printing them one at a time and using a brim around each foot I've had good success. I tried to print two at a time without any brim and had some failures.