1/64 Diecast Garage for Ikea Skadis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Scalable display stand for 1/64 diecast cars, mounted on Ikea Skadis.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 973
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Scalable display stand for 1/64 diecast cars, inspired by vertical parking garages.
Sized to fit most 1/64 cars, including Hotwheels, Matchbox, Mini GT, Tarmac Works, Inno64, and more!
Important Note: Scale the floor's width to 99% if you plan to make it longer than 4-5 cars. This is to compensate for excessive gaps building up between floors over a long distance. It is difficult to push all floors together and eliminate all gaps for something this long, and the gaps adds up!
- Each frame has 2 floors.
- Simply match the three studs between the floor and the holes in the frame, and press them together!
- Four different floor types to choose from.
- Toleranced for a press fit with generic PLA and PETG.
- No adhesives needed, although feel free to superglue them for extra strength.
- End frames only have holes on the right side. Right click the object and select “mirror” in the slicer for the opposite side.
- Middle frames have holes on both sides to expand laterally.
- Stacks seamlessly on top of each other.
Version 1.1: Reduced the frame height by 1mm to enable more than 3 levels of stacking