1 / 4
180 Deg 1/64 Diecast Car Track - Banked / Non-Banked — zdjęcie 1
1 / 4

180 Deg 1/64 Diecast Car Track - Banked / Non-Banked

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 180 degree female track, now setup to use male connectors - printable in PLA or PETG

Ocena
0 / 5
Polubienia
36
Pobrania
266
Wydruki
0
Wyświetlenia
816
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A 180 degree 1/64 Diecast Car Track, now setup to use male connectors - printable in PLA or PETG - track is obviously female.

This can fit on a Prusa Core One or A1, P1P/S/X1C, Centauri Carbon etc. 

Recommendation

I recommend the non-banked track. When ironed it has a nice smooth surface. I also recommend PETG for its flexible nature. PLA has a tendency to crack easily.

Banked is available but is harder to smooth the track layers. 

PRINT SETTINGS

PETG - 0.18 layer height on 0.6 (or 0.4) nozzle, 15% gyroid infill, 2-3 walls, 2-3 top layers, IRONING ON ALL TOP SURFACES - at the very least for the inverse support pieces (only 1 layer required for walls/top/bottom layers for support pieces). The 0.25mm gap allows twisting and breaking off the support for like materials (Can use PLA as well, but PETG is more flexible). Works pretty well to break off currently. 

OR

PLA/PETG Mix - Use the non-banked part and use PLA for the inverse connector pocket bodies. PETG for the main track. I still recommend ironing the top of the supports. 

UPDATE 2025/08/26

Further improvements:

  • Flattened the connector pocket 

  • Added relief for standard 1/64 Diecast Car Track straight connectors

  • Again, IRON ALL TOP SURFACES on at least for the support pieces underneath

  • Print Profile Added Orca 2.3

NOTES

I probably have hundreds of hours perfecting these tracks, with dialed in connector areas and physical printing/testing. No more hokey custom connector pieces. Print with confidence!!

Purchasing

If you don't have a 3D printer and would like to purchase this item, I would be happy to print and ship it to you. Send me a message here on printables. Located in USA but will ship globally if required. Shipping will vary and affect cost. 

Tagi