Diecast HotWheels blister pack wall hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall hanger for 5 blister HotWheels packs (or for any other blister with 11cm width) + hooks
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 274
- Wydruki
- 0
- Wyświetlenia
- 1030
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed from cool white PLA, with auto-generated support inside overhangs. The support is easily removable with a knife (be careful).
I also recommend using an outer brim or mouse ears for better adhesion to avoid warping of the corners.
Hanger cam be mounted directly to the wall with 2 screws (⌀3mm) or using a flat bar, like in the photos.
Added two types of hooks - if you want to stack/couple the hangers – see the main photo.
I mounted it on a 2 mm thick aluminum bar. The aluminum bar is offset 3 mm from the wall with spacers. Hopefully everything is clear from the photos :)
For blister with 11cm width.
UPDATE: December 24, 2025 - added model (ver.2) with improved details for easier inserting of blisters into the holder
☕ I hope you enjoy it. If you like my work, you can support me via Ko-Fi https://ko-fi.com/matus15 ❤