Diecast HotWheels blister pack wall hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall hanger for 5 blister HotWheels packs (or for any other blister with 11cm width) + hooks
- Rating
- 0 / 5
- Likes
- 44
- Downloads
- 274
- Makes
- 0
- Views
- 1,030
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Printed from cool white PLA, with auto-generated support inside overhangs. The support is easily removable with a knife (be careful).
I also recommend using an outer brim or mouse ears for better adhesion to avoid warping of the corners.
Hanger cam be mounted directly to the wall with 2 screws (⌀3mm) or using a flat bar, like in the photos.
Added two types of hooks - if you want to stack/couple the hangers – see the main photo.
I mounted it on a 2 mm thick aluminum bar. The aluminum bar is offset 3 mm from the wall with spacers. Hopefully everything is clear from the photos :)
For blister with 11cm width.
UPDATE: December 24, 2025 - added model (ver.2) with improved details for easier inserting of blisters into the holder
☕ I hope you enjoy it. If you like my work, you can support me via Ko-Fi https://ko-fi.com/matus15 ❤