1 / 4
Diecast Aircraft Display Stand 1:400 Scale - Cradle Type — zdjęcie 1
1 / 4

Diecast Aircraft Display Stand 1:400 Scale - Cradle Type

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here is a display stand I worked up for 1:400 scale diecast aircraft.

Ocena
4 / 5
Polubienia
17
Pobrania
253
Wydruki
2
Wyświetlenia
1400
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Here is a display stand I worked up for 1:400 scale diecast aircraft. I originally designed it for an NG Models 737, but found it also works with NG's 757s as well. It also works for Gemini Models 737s and 757s and I and I'm guessing it will work with just about any other 1:400 scale narrowbody aircraft.

The stand is designed for the rear uprights to sit just behind the wings. In the NG 737, it is designed to fit just in between the two lower antenna aft of the wing section.

Print Settings

Printer Brand: Anycubic

Printer: i3 Mega S

Rafts: No

Supports: No

Resolution: 0.2mm

Infill: 35%

Filament: Matterhackers PLA PRO PLA Clear

Tagi