Liczymy pasujące modele…
Hi, I made a new model of a small airplane which can be used as a keychain. Simple without any high demands on your printer. Hope you like it. There are two versions → hole in the front part of the model and the second in the back.
Printed with PETG and PCCF (propeller). I used 6V engine with 14500 RPM to run it. Changes that I made are mentioned below.
Wall-mounted aircraft holder designed for RC airplanes with a wingspan around 1500 mm , such as the Beta 1400. The drawing shows only the main / reference dimensions needed for orientation. The holder is designed to be mounted to a wall…
The project will be completed soon, and you will be able to print and delight yourself and your little family members. If you like it, please like it. Please leave comments. Maybe you have a suggestion for improvement. We will be happy to…
My latest airplane fixation is on Barnaby Wainfan's underdevelopment FMX-7 BatRay. It is a two seat, tube-and-fabric construction, low aspect ratio aircraft and a progression on the ideas pioneered in his one seat facetmobile that first…
This is the top view of an airplane cookie cutter . Category: Kitchen & Dining
A simple toy passenger plane in two default scales for use with my other toy vehicle and playset models.
Nothing much just a drawing I made turned to 3D
This was a real hit at a dinner party the other night. everyone wanted to take their charm home. Printed here in PLA (though I also used PET-G). No support The plane and the clip can be assembled 2 ways
Developed with an airfoil structure, the connection between the center and the wings is reinforced and strengthened. Specifically designed for use in rubber-powered aircraft, the shaft housing in the center prevents free rotation of the…
Drukuje z PETG , wypełnienie 60% .
It's a precision tool for RC enthusiasts designed to safely and easily leverage the built-in smartphone levels for accurate control-surface setup on remote control planes and other RC models available in three versions version 1 (Large…
Attach with two screws, plug in a battery, and go! Effortlessly swap them between planes 4 x 3W LED Driver 4 x Cold white 6500K 1 x SUMBULBS 60*15mm LED BLUE (Optional) 1 x SUMBULBS 60*15mm LED RED (Optional) 2 x (1-3) S Lipo Battery 2 x…
A version of a microlight plane i really like and often fly in. I wanted a little model of it, so i made one! Have fun printing!
Wall-mounted aircraft holder designed for RC airplanes with a wingspan around 1500 mm , such as the Beta 1400. The drawing shows only the main / reference dimensions needed for orientation. The holder is designed to be mounted to a wall…
A simple toy passenger plane in two default scales for use with my other toy vehicle and playset models.
Model Assembly The model consists of 4 parts, as shown in Figure 1. 1 – Plane, 2 – Propeller, 3 – Washer, 4 – Pin. Bend the tail surfaces at a 45-degree angle, as shown in Figure 2. Make sure the structural frame elements are positioned…
A minimalist 2D wall shadow that every gamer and shooter fan will love. 🎮🕹🔫 Minimalist 2D Wall Shadow Airplane Decoration - Gaming & Shooter Room Decor. Looking for a clean, modern wall decoration that’s easy to print and perfect for a…
I made this model to decorate the Aviation Gin bottle. The wings and fuselage of the plane have small holes for strings to attach it to the ceiling and make it look like the plane is flying. P.S. The propeller and fuselage STL files are…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . There is also a base so you can print other tails and create your own desktop organizer of favorite airlines. A version with a hoop for…
This Airplane Tail plate is very easy to print , part of my collection of different airline liveries . There is also a base so you can print other tails and create your own desktop organizer of favorite airlines. A version with a hoop for…
I have a large rc airplane, and I needed some tires for it, the outer large tires are 100mm tall and the small ones are 80mm tall. I printed the rims all in one print with normal settings, the tires were printed one at a time, and the…
these brackets are designed to be screwed on with one screw and then use glue to keep them aligned. the brackets were printed on the small face, to keep the amount of supports down. they were printed out of PLA the servo is mounted to the…
simple and easy to print airplane that can fly and only weights 3 grams!
I liked the design from TrzaX. It printed very well. For me there was too much friction between the spike and the plain so I reduced the diameter with 0.2 mm. Also I wanted the tail fin to show the swiss cross symbol. Therefor I created…
Got 10 minutes and 2g of filament? That's all you need for this cute little glider. A perfect print for testing.
My latest airplane fixation is on Barnaby Wainfan's underdevelopment FMX-7 BatRay. It is a two seat, tube-and-fabric construction, low aspect ratio aircraft and a progression on the ideas pioneered in his one seat facetmobile that first…
WW2 aircraft game piece. Print the airplane and the stand. Scale to fit your gameboard needs.
Model of airplane with rotating propeller Printed from PLA with 0,15mm layer hight. Supports are needed for both objects
The project will be completed soon, and you will be able to print and delight yourself and your little family members. If you like it, please like it. Please leave comments. Maybe you have a suggestion for improvement. We will be happy to…
This mount is compatible with 1104-sized motors. The maximum propeller size is 2 inches. You will need four M2 screws.
Thanks to rosch8 for the great original wind turbine. I took the rotor blades from the original wind turbine and modified them. Made the wind turbine smaller, it's 160mm in diameter and 175mm long. A 0.3 mm nozzle would be recommended for…
A copy of a Lego Minifigure suit from series 21, because of accurate dimensions of a model, can be printed and used just like a real one.
My print I used more perimeters… the original at 0.2 layer height and 2 perimeters is probably better I have yet to print a version. Having basically filled the infill with perimeters I reduced my overall thickness and have to much…
FINAL VERSION LINK Link to build plate adhesive that I use for reliable printing: TERRABIND X50 PLEASE LEAVE A COMMENT IF YOU HAVE A QUESTION OR IDEA FOR IMPROVEMENT. Video of Velora flying NOTES CG is marked on bottom of plane with an…
Dieses Set enthält eine Waffenkiste mit zwei Fliegerbomben aus dem zweiten Weltkrieg. Das Modell hat den Maßstab 1:16 und eignet sich perfekt für 1:16 WPL RC Trucks, oder andere Fahrzeuge im Maßstab 1:16. Die Bomben Modelle sollten mit…
Add a touch of aviation charm to your decor with this lightbox featuring the iconic no smoking and seat belt signs seen in airplanes. Perfect for travel enthusiasts and aviation aficionados, this lightbox provides a warm glow while…
Update 12/21/2025 - Added an assembly guide! Inspired by SquidgyPlastic's design . I designed this model from scratch, aiming to alleviate a few of the issues I found with their design. This version fits phones with a width of 86.5mm or…
Hi, I made a new model of a small airplane which can be used as a keychain. Simple without any high demands on your printer. Hope you like it. There are two versions → hole in the front part of the model and the second in the back.
Update: Added a new look to the window. You can find it under v02. Update 2: You have available the view from Barcelona Airport ATC Tower in https://www.printables.com/model/1051628-barcelona-airport-lebl-view-from-the-aircraf-windo Bring…
This is a flexible F-15 Jet I made with HIGH FLEXIBILITY! There are no supports required, and I printed mine at 75% scale with normal PLA (look below for print settings), it printed just fine. I'm not sure if you should print it with…
The top view of a airplane cookie cutter. Print Settings Rafts: No Supports: No Infill: 100 Filament: Hello 3D PLA How I Designed This drew it in fusion 360 Category: Kitchen & Dining
side view of a airplane cookie cutter Print Settings Rafts: No Supports: No Infill: 100 Filament: Hello 3D PLA How I Designed This Drew it in fusion 360. Category: Kitchen & Dining
This is a model fighter jet I designed. This will require supports if you want to print it in one piece, although is still pretty quick to print. It is inspired by many real fighter jets/aircraft but this one is completely original.
I made the supports to save space. They are joined together with the help of M4 screws and M4 hexagon nuts, I used M4x30mm only because they are a bit long, you can see in the pictures. The hole for the first support, which comes on the…
I missed watching a plane flying circles around my MK3 extruder motor. Since on MK4 there is no way to install it to the extruder, I have decided to create a series of X-axis visualisers. This is the first one, but more to come. You can…
I made a remix of a nice model airplane for the garden. I added a hole for the bearing (22mm) to allow the plane to rotate with the wind.
Print with 0.12 mm Layer Height No support needed You may need to add a brim to prevent the objects from falling over The zip-lock mechanism is working, but glue is recommended anyway. Have fun! …check out my other RC-related models on my…
I've been happy using a set of TabletHookz (found on Amazon) to hold my iPad and Nintendo Switch on flights. This keeps your device mounted around head height so you don't have to look down the entire flight. It's very much a quality of…
It's my own remix of the stand P51-D Mustang RC plane stand by 3dlabprint. I printed it with Polymaker PLA+ Black; 3 walls; 20% infill cubic; I recommend printing with a minimum of 4 brim to avoid lifting the piece from the bed!
I was able to successfully cut out the cookie dough by chilling it sufficiently, lowering the room temperature, and dusting it with flour.
This is a paper airplane launcher capable of being powered from a Milwaukee tool battery or other 12v source. It is designed to be safe and robust, in that the components are oversized and the electronics are deliberately chunky. As…
I needed some light wheels for a RC airplane I built so I designed these. I started with the hub diameter of 8mm and thickness of 8mm and diameter to outside ring (tire) at 70mm and then changed up the design inside. I made the outside…
Hangar Christmas Ornaments Best printed in Silk or Glitter filament at 0.10mm fine detail quality! The part where you put a rope through is a bit off center so that the hangar leans a bit forward. If you have issues with printing without…
I printed in 0.20mm PC CF for stiffness. The peg fit very snugly, exactly as intended. Be sure you are happy with your filament choice before putting any one of a kind models on a printed mount! Options: Peg measures 4.05 x 9.75mm (5.5mm…
I work with this airplane quite a lot, so decided to make a Wall art of it. Hope you like it! Adjust height to your needs and print. I suggest printing the side you would want displayed down for a flatter finish.
We all love COOKIES… but the shape can make them seem to taste even better! For this design you will not have to add any supports and the infill does not even matter! Why by a cookie cutter for $1 when you can print your own for only ¢10!…
Life-Sized 3D Printable Airplane Propeller (94 Inches [2.4 Meters] Long)—the ultimate aviation decor for enthusiasts and makers alike. This stunning propeller is designed for easy printing on a 220mm x 220mm x 220mm printer, with parts…
If you would like to support this buy the plans on cults for $0.65: STL file Falcon X 50mm EDF Optional FPV RC Airplane 🛩 ・3D printer design to download・Cults
Vykrajovátko na cukroví - tvar letadlo / Cookie cutter - airplane shape Toto jsem přímo nemodeloval, ale vyrobil pomocí aplikace na https://app.cookiecad.com/ Ať se Vám model líbí a budu rád za ukázky vašich výtisků.
I just didn't fancy doing inlays, messing about with magnets, etc. It's the right thing for me, but YMMV.
i modeld it after a picture i found a few years ago, but i cant find it anymore :(
My first published model. All parts are optimitimized for 3d printing. All parts are printed without support or brim, except propeller. You will need supports for propeller, this part has too shallow slope (low pitch angle) and it is…
I wanted some snow skis for my mini slow stick so I designed these. The light version was my first design and is 8 grams. I decided to make it a little stiffer and added the center rib. It strengthened it quite a bit and that version is…
It has 4 whistles that are really loud. It is 69mm tall and diameter is 20mm and fin diameter is 40mm. This is a smaller version of another bomb I made. Be sensible and don't drop over people or property. Print on end standing up. No…
The original model works nicely, but was lacking some rounding. I took care of that using the BOSL2 library. Not perfect, but it does the job. I recommend printing it with mouse ear brim.
This is a simple remix of triky's “Memoir '44: Air Pack - Airplane Storage” found on thingiverse… What I did is add a back/corner stop to one of the two tray ~ that I uses as bottom one ~ so the top tray can stay snug on top. I only put…
0,2mm Layer - 0,28mm Layer 10-15% Infill 2 Walls Without Supports. EN- I recommend adding Brim on parts that have a smaller diameter and pitch at an angle. CZ- Doporučuji přídat Brim u dílů, které mají menší průměr a stoupání pod úhlem.…
I used a NACA 5317 airfoil for this, The PLA wings are more sturdy than the LW-PLA and need retractions, the lw-pla ones are designed for no retractions!
I needed a stand for my RC airplane so I could work on it, so I 3D printed one. It also works great for display. I use two stands with a carbon fiber rod keeping them together.
This is a mount for a Quad Lock Gimbal Adaptor and any compatible Quad Lock 360 head (I'm using a MAG head since it's lighter - 27.5 grams vs 61.5 grams for the MAG wireless charging head ). Note that the gimbal adapter doesn't come with…
This is an Airbus A350 with Santa Hat. If you want you can easily print it multicolor even without an Automatic Color Changing System by using M600 or swapping filaments during printing progress (I did). Also use support structure for the…
I needed to get my 3D printed airplane off my workbench, so I printed a simple hangar to mount it on the wall. I used PETG.
screw into wall then glue lego brick to the end of it and then put the desired object on the brick
This version works great for balsa, cut foam and coroplast control surfaces. You can also use on foamboard, but I have a glue-on version that works great for foamboard. You can see it here:…
A small tablet holder to hook to an airplane table. Holding together by magnets The middle holder isn't really necessary, just made it to hold 2 devices a bit overlapping in the middle.
A simple model that works great. It can secure drawers, cabinets and doors on sailboats or wherever needed. shoe part (696P.071.001-01) better be 100% infill. made with prusa PC carbon fiber
![VELORA 3D PRINTED RC AIRPLANE WING [TEST PIECE]](https://media.printables.com/media/prints/768011/images/5979348_a352c031-c3ea-4c4a-9265-edc84a2e2fe8_d49f1449-a16b-452b-8894-2d3c9acbeb53/screen-shot-2024-02-16-at-51843-pm.png)
