RC Airplane Control Horns
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three different styles of R/C control horns for your foamy R/C planes. Designed for printing in PETG/ABS at 100% infill.
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 700
- Wydruki
- 1
- Wyświetlenia
- 1650
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Three different styles of R/C control horns for your homebrew foamy R/C planes. Designed for printing in PETG or ABS at 100% infill for optimal strength.
Flat horns are designed to be pushed through a slot cut in foam. Big horns need screws to attach. Small horns can use screws or 'pins' on the plate.
Notes:
I've printed these in ABS. Best strength to weight ratio.
PETG or PLA also works, but is not a strong.
How I Designed This
My first design in OpenSCAD
I find that when building scratch built foamies (IE FliteTest style planes) I always need various control horns of various sizes / styles.
These designs were done in OpenSCAD, and can be tailored for various purposes.
Category: R/C Vehicles