AVEX RC - Goblin 700 mm - 3D Printed RC Airplane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wingspan: 700 mm Length: 436 mm Wing Area: 13.37 dm²
- Ocena
- 5 / 5
- Polubienia
- 171
- Pobrania
- 376
- Wydruki
- 1
- Wyświetlenia
- 3700
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Aero VeloX Extreme RC - Goblin 700
🛠 Technical Specifications
Wingspan: 700 mm
Length: 436 mm
Wing Area: 13.37 dm² - 133700
📦 Hardware & Reinforcement Required
Main Wing Spar: 6mm x 500mm Rod (1x)
Secondary Wing Spar: 6mm x 250mm 1x)
Elevon Control Rods: 3mm x 300mm (1x)
⚙Printing Settings
Layer Height: 0.28 mm
Wall Loops: 1
Top Shell Layers: 3
Bottom Shell Layers: 2
Sparse Infill Density: 3–4%
Sparse Infill Pattern: Cubic
📊 Weight Breakdown & Specs
• Filament Weight (PETG): 240g – 300g Max
• Electronics Payload: ~485g – 500g
6S Battery: ~350g
2806.5 Brushless Motor: ~50g
ESC: ~70g
Flight Controller: ~20 g
2x Mini Servos: ~20g
GPS Module: ~20g
(Calculated based on maximum expected weights for electronics + maximum printed airframe weight: = 830g)
• Target AUW (All-Up Weight): ~800g – 900g (MAX)
• Estimated Stall Speed: 34 - 38 km/h
Update (Oct 04, 2026): Updated the Vertical Stabilizer.