Liczymy pasujące modele…
Low Poly Howling Wolf. Print Your Pack!! Great for Testing Input Shaping!! Thank you Thomas Sanladerer for the feature ;) Commercial Use License: https://cults3d.com/:1225367 65 cent Donation: https://cults3d.com/:1225394
Wydruk około 2,30 €–2,82 € nettoWstępna wycena jednego wariantu
*** Free to print, NOT to sell *** Thanks to sunset and sunset_3d_design for uploading this great model! UPDATE 12/11/2023: Added v9.5. Fixed the fused segment from the new PrusaSlicer updates. I moved the “Spikey” models into the archive…
Wydruk około 8,86 €–10,83 € nettoWstępna wycena jednego wariantu
This is a Remix of Mushroom Ornaments by @cnelson who remixed this model . Thanks to both of them. I just fixed the ring that was causing the trouble.
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
This is an additional hook to be mounted on an IKEA Trotten desk (the fixed version, not the height adjustable). It's made to be placed on the side, between the legs of the desk, using the two big sleeve screws from underneath. The design…
Wydruk około 2,36 €–2,89 € nettoWstępna wycena jednego wariantu
Prolongement pour les sticks. Nécessite des vis M3X20 pour la tête et M3X16 pour les connecteurs. J'ai testé sur XBOX, ça devrait pouvoir s'adapter sur d'autres models. Si il y a un problème, n'hésitez-pas à me contacter. Merci :)
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Zeichendreieck mit festen Winkeln für Konstruktionen oder für die Schule.
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
took out the back for my ender 3 (didnt want to take the hotend off) so i could slid it over the hotend. and i added some holes for the air to move out of as well.
Wydruk około 4,21 €–5,15 € nettoWstępna wycena jednego wariantu
This is a remix of a crystal dragon, which fixes the first two elements after the head (they are merged together and not movable in the original model) Features Articulated Looks best in Rainbow PLA Recommended print settings Layer…
This is a remix of the Articulated Ice Dragon by p1lotz . In the original upload, the last segment and the tailpiece were slightly stuck together. This version fixes that, and I also added a version with no arms and Low-Poly versions: The…
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
I merely changed a small thing that I think was breaking the feature tree. All credit goes to the original creator, I uploaded this in case others might find this useful as I loved the parametric box. Tell me in the comment if you find…
Will fit spool width of 45mm-110mm (~ .5kg - 2kg spools) Copied from original model by Copanko : Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap…
A fixed AR-15 style, mil-spec buffer tube that attaches to Picatinny stock interfaces. Printed in a single piece lying flat for incresed sturdiness. Mounts with two M5x30 bolts and M5 Hex nuts. The tube has 4 postions for the stock to…
This is a remix of an existing model. I just fixed some issues with the STL and rotated it so it could print better. Printing without supports appears to work just fine. Category: Costume
The flow from the original waterfall fountain tends to flow to one side. This is because of a sideways water current at the mouth of the fountain, caused by it's internal structure. I have recreated the waterfall fountain from scratch in…
I got frustrated with trying to get the original ( https://www.thingiverse.com/thing:458903 ) to print right so I remodeled the entire thing up in Fusion360 with a flush bottom. I've also added a modified version for easier printing and…
This is a fixed height riser for the OMTech Polar. The model is designed as a tapered cylinder with a recess area at the top for the feet to be inset. The riser elevates the machine to the maximum height for engraving cylinders with…
I fixed lance's models issues mentioned in the comments: Closed the hole Leveled the outer surfaces to reduce the amount of support material needed Print instructions: Turn supports on Print with it's back on the plate Use PETG or some…
The original model has some weird mesh overlaps and cavities that causes cura to have strange gaps, so this is a fixed version that is completely solid. In all other respects this is identical to the original
Wall mount for the new Blink Sync Module 2 that came with my Blink Outdoor (3rd Gen) camera. Included North American and European Outlets.
Liked the original design, but modified to fit my 2005 Tacoma Prerunner with a 5 speed manual. I added length to the bottom, opened up the hole diameter and added 12mm x 1.25 threads. 6/17/2023 - I fixed some slicing issues. It should…
Fixes pegs in the back to fit wall correctly. Needs a small pillar of support in the back for the top center peg. Support in front for the next that's generated when selecting auto support is not needed
I fixed the clips that hold the blade in and now it works way better, and I think pretty much any rigid filament should work
Features: - Uses little material because it is not too big - Different overhangs, 45° and a curved one - A thin wall at the overhang to test the layer adhesion by breaking it - A bridge, from 30mm length in the back to 35mm in the front -…
Changes include: Much cleaner mesh Less steep overhang at the groove ledge (I didn't manage to print the original well) Shorter bearing slot to help with alignment Chamfered lip to help with printability
NOTE: : Your lid might not fit right unless you modify it. It's not a problem for me because I keep mine in a drawer with the lid off. Also, this print has tight tolerances. Make sure your printer is calibrated. Be advised, I have an…
A small ruin or construction site. This is another remix (I can't find the link to the original). I have corrected some details and added a base. Category: Toy & Game Accessories
This is a split box for a Jenga game. https://www.thingiverse.com/thing:3060349 This version uses has holes for M3 screws and nuts for connecting the halves together easily and in alignment. If you don't have sets of M3 M4 and M5 screws…
This is a fix for the frame mount of Squirrelbrain's V-Minion Y-axis drag chain mod (3-hole version) where the frame mount interferes with the 3030 corner bracket and forces the drag chain into a smaller bend radius. You can find more…
If you are going to use this model for your own model, make sure the license matches and that you give me credit. This is a remaster of my old ACA Banshee 115 siren model. Enjoy! (Made for a user who had issues with my other model,…
Wikipedia 3D Logo, 10 cm diameter (STL file) Printing Using supports Any filament (PLA, PETG…) Colours should respect the Wikipedia guidelines
Use supports or no supports. I recomend to not use supports because it is really annoying to take them out
This bulkhead lets you embed a USB-C PD Fixtured Voltage Module inside of itself allowing you to use a USB-C charger at a fixed voltage based off the type of voltage module you purchase. Simply take the module and place it inside of the…
Cura was complaining about this model (also visible in the Printables preview). I loaded it up in Tinkercad and exported it to fix the issue. I didn't change a thing. Quick and dirty fix.
The original "cap" model had vertices covering the holes for the screws that hold the whole handle onto the printer, which made it impossible to get the screws in. I fixed those vertices and then converted the file into a stl. The handle…
These two objects are fixed arms that replace the cell phone mount gooseneck that comes with the "Dakason LED Ring Light with tripod Stand and Phone Holder" so that the cell phone camera can be positioned better than you can with the…
In the original version by @Masibu_126487 , when changing parameters in the Fusion 360 file, scoops generate wrongly for heights above 3 (21mm): a gap appears in the back of the front wall, leaving the scoop unsupported at its peak and…
The original model had the problem that it did not fit into the Elgato Prompter with the high position of the cutout. Here the camera position is more centred so that it fits well and you can also look centrally into the prompter for…
I remixed the design from William_Additive so i can use it on the corners of glass tables (up to ~9mm thickness). I also cut a tiny bit off of the bottom of the original things, because i got no usable first layer with them (see attached…
I found when I printed the original file, the pins did not secure the arms to each other. A quick fix here using rivets For the model, you'll need 7, but there are 8 in the stl just in case. Drill a 3/32" hole in each of the arm pins,…
The original had a m20 thread that did not fix the light linked for me and a few others in the comments. I measured the base and made a threaded hole that hold the light
The original model had too small thread for the fitting, this model fixes that
Numbers were floating in original, I moved them down slightly to be able to print the numbers
Custom for a friend of mine, should work as a muzzle cap replacement to give your blaster a more tactical look. Now plus a rifled version Please dont print in black
Print standing up and enable organic supports + print on bed only.
I encountered issues with the original Lux mount for the Cambam. If you use 2.5" props (as intended), you only have 16.75mm gap between the blades for the camera mount. Because of this I built a similar version with improved clearance,…
Mounting Brackets for Lamp Socket Light Fixture Quick fix for broken ceiling light clips. They worked great. These were to fix the clips on an LED kitchen light. They hold the glob with no issues.
THIS HALF-BAKED REMIX HAS BEEN SUPERCEDED. USE THIS ONE INSTEAD: //////////////////////////////////////////////////////////////////////////////////////////////////////////////// This is based on Thingiverse #4867466. The original has a…
It's an Adaptor for this A-Pillar-Mount: https://www.twizy-forum.de/3d-druck/82990-3d-druck-universal-halter-fuer-die-a-saeule?start=150#168884 I use it, to mount the display of the dashcam in my Twizy. TinkerCAD-Link:…
Inspired by 2.4's flying gantry, making gantry partially flying, using bed mesh as indication, manually tune Y axis into one plane. I use standard voron heatset, modify if needed. Loosen one rear end of Y axis, use a long M3 bolt to…
All credit goes to theamzngq, and his models. I found that this stl had a pretty large gap between the base and battery post
Hotend cable support system containing a replacement cover for the X-Axis carriage and a printer top bracket vertical cable support. Print Settings Printer: SainSmart Coreception-300 Rafts: No Supports: Yes Resolution: 0.20-0.30 Infill:…
Orientated it correctly and fixed the bottom.
The current Multibuild nameplates for drawers etc do not fit the models so i made a fixed 77,5mm wide plate with 40 degree chamfers that fits perfectly the current drawer models. Use the step or freecad model files for customizing your…
Created this mount to fix the rotation of the Phaetus Dragon in the Bondtech BMG extruder i just printed from MarcoZ76 BMG Bondtech which is a excellent extruder design but check my other models as ive made improved versions of the BMG…
I printed Banditoz's tft35 screen case and discovered that the slots on the mounting bracket for the pin header didn't line up with the board when trying to mount it, so I remixed it. I printed it and confirmed that it lines up. I had to…
This is a remix of https://www.thingiverse.com/thing:4180261 I wanted to make it multi-layers, but then noticed a few imperfections to this model. I spent some time cleaning it up, resized it (I wanted it to be a kids bedroom decoration…
There is a gap on the original file which makes it unprintable. Rather than complaining, here is the fixed version
Holder for a WISRELEC T-Type Fixed Torque Wrench The others that are online don't allow you to contain all items include
All credit goes to theamzngq, and his models. I found that this stl had a pretty large gap between the base and battery post
Fixing the CR Touch Error on Creality 3D Printers Hello everyone, Recently, I encountered the common CR Touch error. After extensive searching on the internet and trying all the suggested solutions, I unfortunately didn’t achieve any…
Remeshed for a friend as it was crashing Prusa Slicer. Too many manifold edges in the original
The original model had too small thread for the fitting, this model fixes that
Mounting Brackets for Lamp Socket Light Fixture Quick fix for broken ceiling light clips. They worked great. These were to fix the clips on an LED kitchen light. They hold the glob with no issues.
Why When determining the maximum flowrate for a specific hotend/filament combination I always use the poop method , in which blobs of filament are extruded and weighted to assess the capabilities of the setup tested, but this time I…
i'm using it for about a month in tough condition and all looks well. printed with tree supports. you can disable supports for the finger grips, it's not needed.
One version is installable and removable without sliding it out to the side, the other is slide-out only. Best printed in PETG. No support needed. --- Eine Version ist ein- und ausschwenkbar, ohne den Haken zur Seite herausschieben zu…
The original model has some weird mesh overlaps and cavities that causes cura to have strange gaps, so this is a fixed version that is completely solid. In all other respects this is identical to the original
If you need a pic-rail-mounted stock, you've got lots of very modern options. But if you want something a bit more classic from back when stocks were whittled from logs or molded from beaver puke, the pickings are slim. So I made this.…
This is part of the BLV MGN Cube printer. This is necesary if your extruder is Direct Drive, and BMG model. See notes. It was made to align the BMG extruder with the E3Dv6 input. (they were missaligned) Print them in PETG, 90% infill…
English: I previously encountered a Gravitrax snowflake model with a 2.8-star rating, criticized for flawed design. I printed it to challenge these assessments, yet replicated the same design flaws. Consequently, I submitted a 2-star…
This is a wall mount for a Shark hand held vacuum with a charge port. This should fit the following models CH901, CH950, CH951, and CH955. I added a recess for the AC adapter so it stays put.
ich habe momentan keinen 120mm lüfter da also habe ich es geremixt das man auch einen 80mm radiator verbauen kann. Es gibt 2 Variationen eine die das Netzteil und das SSR und das Netzteil belüftet (v4) und eine Version die nur das…
This is a remix/repair of the 90-degree vent hose model from RobertCowen for the Xtool P2 and P2s. The models that he has posted for this specific part have artifacts present in them that stop both the 3mf and STEP files from printing…
Looking for strong, reliable, and easy-to-print caster wheels for your next project or piece of furniture? These heavy-duty casters are designed with strength and simplicity in mind. Easy Mounting Options – Secure with screws for…
UPDATE: I made a version 2 of this design with a pivoting front axle, and a few other changes. It's a lot more fun to play with. :D ----- I needed a covered wagon for an object lesson, and didn't want to decorate a shoebox, as one source…
A model of a 1968 or "Toob" ACA hurricane & ACA HURRICANE 130 MK1 that can be put on a Lego axle (file is now fixed)
There are several problems with the original case, this remix aims at solving them all: - Can't enter dfu - Can't connect and disconnect battery - There is to little space for the battery (thickness) - The battery pushes onto the gps…
Knob / Cylindrical Fixed Handle - Impugnatura fissa cilindrica M6/M8/M10 Metric thread M6x22mm Thread M8x22mm Thread M10x22mm Thread DIN931 M8 DIN931 M10 All our designs are free to download and use—because sharing drives innovation. Your…
Artful From DIE OF DEATH. Print in PETG like my man Mr.Make_It says you should. Second figure to have accesories without update to add them (First was Nosoi Vessel and Tree). You can print “Implement” and “CopyWrite” in PLA. 12/16/25 UPD:…
THIS HALF-BAKED REMIX HAS BEEN SUPERCEDED. USE THIS ONE INSTEAD: //////////////////////////////////////////////////////////////////////////////////////////////////////////////// This is based on Thingiverse #4867466. The original has a…
A 30° fixed-angle canopy for the C03 camera with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective horn on top, and a rear antenna…
Print this base and use logo and mindflayer models from the original model. Changes in this base relative to the original: Added a chamfer to the lip that holds the logo in place, so that it can be printed without supports Sliced the…
My new TL-SG105 doesn't fit the original mount downloaded here. Vendor design changes perhaps? The original mount peg positions are 14.33mm too far from the tab border and are also too big to get through the “+” holes on the switch. What…
My third model. Nice little fidget, bring it to school, put it in stockings, very simple.
This is a remix of the Apple Watch Charger Wall Mount made by Alex Krush. This remix solves the problem I had where the Apple Watch charger didn't stay properly in the original Top holder. Support me by using my referral code on Prusa…
This is the Gourd skin for C00lkidd from the hit Roblox game Forsaken turned into an action figure.
Print in PETG with tree supports or risk getting Void-Rushed. For the Extra Parts, the head with the hole on the back in for an insertable void crown. Theres also the crown by itself and a head with the crown on it. UPD 1/10/26: changed…
I found many bin attachments online, some that curve around the machine and others that are free standing. What I wanted was a permanently mounted stand with a bin that sits securely in place, stays close to the machine to save space and…
***UPDATE*** These parts are for the V1. Edgar has updated the design to address these issues in V2. Edgar has a great design here, but I ran into a number of issues with it when the parts were printed. Notably, the holes for the stepper…
This is the robot, fourth chorus from the game Hollow Knight: Silksong. It activates when you return to it's location, and tries to attack you. It's a fun bossfight that I wanted to pay homage to. I worked pretty hard to make this, and it…
the other single mini bit remix had bad threads, i fixed it and also rounded off the edges to make it look a bit nicer
Fixed Joint Very useful if you want to fix two pieces at a particular angle. Connect using 30mm long M10 bolt and nut. Takes 15mm rods max. Secure it using M6 bolt. Useful for mounting plates, fixed mounts, automotive, household, 3d…
The Problem: The original plastic nut on the Fixed wireless charging car stand (and many similar generic holders) is prone to cracking under stress or temperature changes. Once cracked, the phone holder can no longer hold its angle and…
MKS original screws needs to be replaced for longer m3x16. Board is secured to the mount with 4 screws.
I fixed lance's models issues mentioned in the comments: Closed the hole Leveled the outer surfaces to reduce the amount of support material needed Print instructions: Turn supports on Print with it's back on the plate Use PETG or some…
