RC Airplane Snow Ski
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Skis for use in the snow with RC aircraft. Fit 3mm legs.
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 288
- Wydruki
- 0
- Wyświetlenia
- 3005
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
These skis fit on 3mm legs. I used them on my Horizon Hobby Twin Otter with incredibly fun results! They work best on 2-4 inches of fresh snow, or any depth of snow that's been out for a while. There is a built in stopper that holds the skis in a 25 degree upright position so that the skis take landings without breaking.
The front of the ski has a loop for a spring to wrap around. I used 20mm springs from an assortment purchased on Amazon. The clip files are used to prevent the spring from slipping down the leg/nose gear. For the nose ski, just print whichever ski has the stopper on the same side as the vertical portion of the nose gear.
These are so fun to fly with and I recommend giving it a try if you've never flown with skis and live in an area with snow.