1 / 4
Stronger hub for RC airplane folding propeller from Eclipson — zdjęcie 1
1 / 4

Stronger hub for RC airplane folding propeller from Eclipson

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The original hub had the spars that connect the propeller blades printed with the hub at a position that would not be…

Ocena
0 / 5
Polubienia
47
Pobrania
303
Wydruki
1
Wyświetlenia
1997
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

The original hub had the spars that connect the propeller blades printed with the hub at a position that would not be very strong and then dangerous. I created a hub part that has sparts printed at a better orientation strenghtwise. This spar is then glued to the base hub.

Tha blades and spinner parts you get from the original thing.

Print a hub base and two spars. Glue them with CA or Epoxy. Enjoy.

Print Settings

Printer:

forkLIFT MK1

Rafts: 

No

Supports:

No

Resolution: 

0.2

Infill:

100%

Filament:

3DVale ABS 

Natural ABS


Source files, at OnShape, for remix!! 
 

Notes:

 

Can be printed from PLA, ABS or PETG. You can choose a different material for the spars such as ABS or PETG to be stronger.

Designed with 0.2mm layer height and 0.4 extrusion width in mind. Three perimeters is recomended.

 

 

Category: R/C Vehicles

Tagi