Stronger hub for RC airplane folding propeller from Eclipson
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original hub had the spars that connect the propeller blades printed with the hub at a position that would not be…
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 303
- Makes
- 1
- Views
- 1,997
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
The original hub had the spars that connect the propeller blades printed with the hub at a position that would not be very strong and then dangerous. I created a hub part that has sparts printed at a better orientation strenghtwise. This spar is then glued to the base hub.
Tha blades and spinner parts you get from the original thing.
Print a hub base and two spars. Glue them with CA or Epoxy. Enjoy.
Print Settings
Printer:
forkLIFT MK1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament:
Natural ABS
Source files, at OnShape, for remix!!
Notes:
Can be printed from PLA, ABS or PETG. You can choose a different material for the spars such as ABS or PETG to be stronger.
Designed with 0.2mm layer height and 0.4 extrusion width in mind. Three perimeters is recomended.
Category: R/C Vehicles