Liczymy pasujące modele…
English Montserrat is an emblematic mountain of Catalonia. It is a symbol of my country, which we often refer to as the magic mountain. With a very characteristic topography and relief, its peak (Sant Jeroni) has an altitude of 1237 m.…
Wydruk około 12,34 €–15,09 € nettoWstępna wycena jednego wariantu
Printed with PLA (0,2mm SPEED) with 5% Cubic infill. Canopy has place for a magnet, same as original, but can be also fastened using a velcro.
Wydruk około 1,92 €–2,34 € nettoWstępna wycena jednego wariantu
I've created this nema 11 stepper motor mount for my ASKAR FRA 400 telescope. I give as well my dew shield for this scope. You have to found the adapter piece (coupling) 2.5mm to 4mm (stepper to focuser) as I've not designed myself.
Wydruk około 5,97 €–7,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keycap compatible with the wireless Logitech k400r keyboard. I split this keycap into two parts so the connector can be printed lying down because otherwise it wants to catch on the keyboard forcing the user to press in the center of the…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena jednego wariantu
was kind of tired of locating the build plate on my V400, (its not bad..but..) so I practiced some more drawing and came up with this. I will add 2 sided tape to lock it in place.. but it works as is.
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Intro Three storeys to give your Gecko a choice of environments. First Floor: Nearly completely hidden Second Floor: Protection from above and 3 sides, but a wide outward view Third Floor (Roof): High but unprotected position to observe…
Simple Holder for FLSUN V400 Display. Holder has a 10° Slope Just needs: 4x Bolt - DIN 912 M3 x 10 4x Nut - DIN 985 M3 - Nut
Effector plate for the V400 with all the holes. 99% acurate. Also added the pins. Edit: Also added a .stl with physical thread.
The bottom recess will fit a single 8x3mm magnet. I'd recommend printing with PETG if possible (less brittle). The original model was designed for assembly as opposed to print-in-place. Printing the parts separately will likely yield…
Simpel camera mount for cameras with clip mounts. PETG/PLA
Canon Lens Hood designed for a cheap Replacement for ET-74B REPLACEMENT FOR : ET-75B https://www.amazon.com/-/en/LH-74B/dp/B06XSJ3FT4 PROOFED TO BE COMPATIBLE WITH: RF 100-400mm F5.6-8 is USM…
You can get the FYSETC Portable Input Shaper here: Aliexpress:…
A lens hood for Canon RF 100-400mm F5.6-8 IS USM. It's length is 60 mm, and it has an integrated deflection spring lock to prevent it from detaching from the lens. Allows for usage of original lens cap. For best print quality, I advice…
Files Can be downloaded at: https://www.thingiverse.com/thing:5984898 I had to upload a link because Printables doesn't allow me to upload the actual Json files that orca uses for their slicer. however thingiverse does allow it.. so thats…
Remix based on: https://www.thingiverse.com/thing:2790897 Made a very simple cut out for the volume buttons because they will get pushed in with the original version. Also I didn't find any other side stand like this. It has also a place…
FLSUN V400 Stock Runout Sensor Mount.
forgor to add remix to https://www.printables.com/model/381267-fv4005-tank srry
Paint rack for Army Painter, Vallejo, Scale75 etc. Includes STL, DXF for laser, and F3D. Wall mounted. Suitable for 3D printer or laser cutter (mountings need to be 3d printed). Requires: 4x wall screws to mount, or 8 for an extra secure…
I use this water pump to empty my pool. But the connector to the tube is not the best tool. The water pump is delivered with an Adapter for standard hose 13, 19, 25 and 38 mm (½, ¾, 1 and 1½“) with non-return valve and connection for…
Custom completely printable SFF PC case able to fit Nvidia RTX A4000 (slightly modded). The goal was to design and develop the smallest possible PC with powerful workstation graphic card with four display outputs. Parts: MB: Asus ROG…
Project Summary This model has been designed with manual/per-layer filament swaps in mind, for printers without an MMU or AMS. Can be printed on any printer MK4S-sized [250 x 210 X-Y] or larger . Print out and dry-fit all parts before…
This quick edit allows you to use a ¼" screw to mount a camera or webcam. The hole is 10mm to give some wiggle room. for minor adjustments if needed and used a plastic washer. I printed it with 4 walls and 40% cubic infill and it's pretty…
The S400 Talon Magwell is a 3D-printed magwell for the ZWQ S400 Zebra Bullpup Blaster designed by Luke Goodman at Out of Darts. Featuring a standard talon magwell with a rear paddle mag release, this part is an upgrade from the magwell…
I'm building a few shelves for spool rollers next to my V400 and I'm not using the spool holder on top of the printer. I changed the bowden tube to a longer one for easy insertion of filament (see pics). What I noticed was that even a…
High profile bracket for Nvidia Quadro p400. The mounting screws cut threads into the plastic. First wanted to add nuts, but I don't think it is needed. Embedded cylinders for extra rigidity, it really helps with holding GPU in a place…
A simple rail that attaches to the tube rings of an Askar FRA400 refractor telescope. The rail mounts to the rings using M6 screws. The center holes are designed for 1/4-20 or M6 screws and hex nuts (11.5mm between flats) whereas the…
This 3D-printed bolt-release shroud is designed to be installed beneath the bolt-release latch of first-generation Beretta 1301 Tactical, Beretta 1301 Competition, and Beretta A400 shotguns. Its purpose is to help prevent unintended…
Ring that holds the hood of an Askar FRA400 refractor telescope in the extended position. Requires a 10mm or longer M2 screw and hex nut. Without the screw, the ring is flexible enough to be passed over the hood.
Ständer für eine Logitech K400. Der Halter wird wahrscheinlich auch für andere Tastaturen passen.
This base mount allows you to use TeachingTech's ball-joint camera mount system on your Flsun v400 (and possibly SR) rail. Specifically made to be short enough to work with enclosures. Currently designed to use phnxdrgn536's hardware…
Cable holder that mounts to the tube rings of an Askar FRA400 refractor telescope using M6 screws.
Move the Bafang display from handlebars to top for a cleaner look and protection in crashes. Also enables the use of handlebar mounted headlights. Designed for a 32.5 mm top tube, i've encluded the model so you can adjust to your diameter…
Printed with 0.2 layer height 15% infill. Use it on top of the strings by the bridge. Do not stick it under the strings!
Uses 3 standard utility knife blades. Needs 2x M3x20 and 1x M3x25 screws and nuts. Stack the parts in order: a_cover, a, b, c, c_cover. Should be pretty straight forward. Cut the coax, push it in all the way, clamp down, and spin the…
This was made to cover the slot where a slim disk drive would fit on an HP ProDesk 400. We've had a few drives fail at work and no one uses the drives often enough to justify ordering replacements. This just makes the desktop look a…
This is a copy ring for Festool OF 1400 router. Thanks to ChowS on Makerworld for making the initial model. I remixed it so that you can print your own inserts. The accuracy and robustness of a 3D printed model will not be sufficient for…
Small Logitech K400 mount that swivels, tilts, and has a quick release for the keyboard. The quick release is like a worse version of the dovetail quick release system found on some tripods. I made this specifically to clamp to a piece of…
This attachment is for the srb400 by SplatRBall ® and allows you to attach virtually any picatinny stock. This model is easily printed and requires supports. If you're looking to add a fixed picatinny stock or even a picatinny mounted…
You ever get one of those small 400 pin breadboards, and just feel awkward with it because of how small it is? Well, with this base, it's harder to lose the little guy, as well as it serves as a nice platform to just hold it down and work…
Was making a siren for my son's halloween costume and need an enclosure for a breadboard . It need to have holes for switches, power, speaker wire, and an on/off switch .
Flsun V400 arm widening pliers Makes it easy to unhinge the spring loaded ball joint to do maintenance. Printing / mouting Print with side down (see pictures). No supports necessary. Example pliers Printed using generic gray PLA. Approx…
This is a 180 degree Rotation scale for the ASKAR FRA400 telescope, though it might (should?) work on any of the ASKAR scopes with a 78mm drawtube. Major divisions at 30 degree, minor at 5 degrees. Line up the centre division with your…
This is a custom-designed holder for the following Eheim models: Eheim 4004512 Eheim 4005510 Eheim 4004412 Eheim 4005410 The holders are available in two different sizes, 20mm and 30mm. You can choose between a single holder or a dual…
SCALE TO 1000% when using obj files Could not find any middle buttons for the K400 plus so i made my own the STEP file and the STL/OBJ is attached, feel free to alter how you want I have pre made some of the most common apps but you will…
Support caméra pour flsun v400 / v600 , caméra rotatif
Holder for a 7" Touchscreen made by waveshare or joy it to be mounted to the bracket by vman81 https://github.com/vman81/pi400-mount/ measurements of the screen can be found in the pictures, source here:…
Was rebuilding a boat with my dad and didn't feel like ordering a Scupper flange for it. So I made it. It fit perfectly. I made it out of PETG. Good Luck hope this saves someone else time and money.
Drumstick holder. Snaps onto the leg of the AODSK AED-400 electronic drum kit, or anything with a 38.2mm leg diameter. 200mm tall. Printed on MK3S+ with Prusament Galaxy Black ASA. 0.2mm layers, 10% infill, no rafts/supports
just a Simple Flsun V400 Cable Tower clip
Tired of trying to align your smartphone with Samsung's inductive charger? Print my design of phone holder bracket! It was design specific with EP-2400 charger in mind. Print in the position shown in the photo - you will need supports, my…
I designed this 4-bar-linkage Hinge, to have the Doors of my Vcore4 400 fold outward to the side of the printer in a controlled way. I’m using 6mm PC Panels for the door, and 6mm ACM + 8mm Insulation for the Sidepanels. I also added a DXF…
It's finally here! The toothpaste squeezer 3000 has undergone an update and has become the toothpaste squeezer 4000! And if you've followed the updates on this models many updates, you will for SURE be excited for Oct 31, where the model…
A support for the Westcott FJ400 flash unit to allow added stability if placed sitting upright. I often use my FJ400's to bounce light off the ceiling when shooting around the house. Sometimes I don't want to bother with setting up a…
A simple keyboard holder for the infamous Logitech K400 Plus, better known as the "Sim Racing Keyboard" because of it's trackpad, and wireless design. This holder is made for sim seats to be hung onto a side handle in the seat. INFO: -…
Print at 0.1mm layer, 100% infill. Rotate 180 degrees, like a pyramid. No supports needed. Imprimir a 0,1mm de capa, 100% de relleno. Girar 180 grados, como una pirámide. No necesita soportes.
I would print this model from PETG to prevent "Plastic Creep" and warping over time. This is a leveling base for anniversary clocks, also known as 400 day clocks. Some of these clocks did not have leveling features at all, or sometimes…
This is a docking station for the Philips S5400/06 Aquatouch. Simply insert the charging plug and slide your razor into place. Accessories like the razor head, hair clipper, or beard trimmer can be attached on the side. Sorry for the lack…
Needed a wall mount for the carbon monoxide alarm that I picked up. I have made the model so that the hardware is optional. I recommend using 3 walls for this print.
Installation & Required material This model requires specific hardware for mounting: 4x Magnets : There are slots designed for block magnets sized 50x10x2 mm. You will need to glue these into the back recesses. 3x Screws : The model…
An adapter to be used on Ice Barrel 400 , so you can chill the water with the lid closed. Connects to a 3/4" barb connector Print upside down with no support
As it is described in a title ;) In short - this is the ONLY WAY to solve ALL wltoys12428 steering issues! buy cheap parts from ali - https://s.click.aliexpress.com/e/_DCCUMIV print base and top plate from this topic print servo holder -…
This is just a simple stand that I made to hold the computer along with 3 portable hard drives that I had.
As my printer is located on desk with original enclosure I designed side spool holder. Central cylinder is for spools with 55mm central hole. I used aluminium stick 8mm for cylinder, but also there is file for spool sticks, please use…
A simple case for the Good Display GDEY042T81 4.2" 400x300 ePaper
Simple and light K400 holder for my sim rig. It could fit other keyboards, i have no idea - feel free to try and let me know. It's not designed to use the keyboard on it, only to rest it while not in use. It appears to hold fine if doing…
An insert for the BaBo System, created by https://www.printables.com/@Willi . This insert is designed for the BaBo Duo 60 mm drawer to store a 400 ml can of 3dlac adhesive spray. Print twice, it's mirrored. There's a bolt and a…
You ever get one of those small 400 pin breadboards, and just feel awkward with it because of how small it is? Well, with this base, it's harder to lose the little guy, as well as it serves as a nice platform to just hold it down and work…
*Updated profile to v2 - improved design which is now easier to take apart (better gap tolerances, and an indent at the back to prise it apart without damage). Snug click-lock case to build an mmWave sensor for ESPHome using an ESP32-S3…
Each of the original massaging footrollers of the Homedics FB-400H heated footbath is produced through injection molding in two identical halves. Each half consists of a half roller and a half axle. The small cross-sectional area where a…
I felt the front of the car was cut short so I added a nose cone that works as a bumper as well.
Eco Turbo Fan - FLSUN V400 I designed a kit to mount the BIQU eco turbo fan kit on the FLSUN V400. I started from the fun duct by Robert_Klotz (https://www.printables.com/model/725525-flsun-v400-cpap-duct) modifying it and improving some…
I designed this 4-bar-linkage Hinge, to have the Doors of my Vcore4 400 fold outward to the side of the printer in a controlled way. I’m using 6mm PC Panels for the door, and 6mm ACM + 8mm Insulation for the Sidepanels. I also added a DXF…
Original: https://www.printables.com/model/372300-bosch-ebike-charger-holder-bpc3400-4a/remixes
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
Since I started working on small scale solar power plants, I continued to search for ways to increase the energy yield of the two to four solar modules. The “Sunchronizer D1" Dual Axis Tracker is a solar module holder with which…
This 3D model is a custom-designed top cover/faceplate for the Deepcool AG400 and AG400 MAX CPU air coolers. It fits securely over the top of the heatsink while maintaining full airflow and fan performance. Features: Precision-fit…
A container for a Muji pump dispenser. 67.5 mm x 67.5 mm interior Refill Bottle. Main body is 107.77 mm tall. Size are for the volume. Hole in the bottom for water drainage. I can make some other sizes on demand if people find it useful!
This bracket allows you to use the power supply out of a Fujitsu Esprimo E400 computer in a case which takes a standard ATX one. Despite its strange dimensions, its outputs conform to the ATX standard. You'll need 7 screws; 4 to mount the…
My triple slot GPU was running a bit hot on the NR400 despite having 3 intake fans installed, so I made this to improve the airflow to my GPU by mounting it right behind the fans on the front of the case, on top of the hard drive cage on…
This is a two part model, GPS bracket is glued on the base of the FC bracket. FC bracket is designed specifically for the JHEMCU F405 Wing but has 30(31)mm spacing so in theory any FC with matching hole spacing should work. GPS bracket is…
This model is designed to protect your Bosch smart system charger BPC3400 from damage while handling it. With the integrated feet, the charger will hover a little bit above the floor. This keeps rocks and stones from scratching it and…
Needed a wall mount for the carbon monoxide alarm that I picked up. I have made the model so that the hardware is optional. I recommend using 3 walls for this print.
Beta 1400V2/V1 Krytky serv / Beta 1400 V2/V1 Servo Tray Category: DIY
Presenting the Countach LP400 Shell, a striking 3D printable model of the legendary Italian supercar, elegantly concealed beneath a dark, flowing cloth. This model is designed to evoke excitement and anticipation, perfect for showcasing…
Hier handelt es sich um eine Hülle für mein Canon RF 100-400 IS USM f5.6-8, denn es kommt ohne Hülle und ich möchte es möglicherweise ins Gepäck ohne extra Kamera Rucksack mitnehmen. Die beiden Hälften werden aufeinader geschraubt. So…
Material: 430g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P3a, P3b Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…
I want to rebuild this set but the draw arm is an exclusive 3d printed element, so I remade it. You can read more about this element: https://www.newelementary.com/2019/06/lego-inside-tour-set-4000034-3d-part.html I have yet to find a…
cp400 mount for mp512 sights Windage ajustments from mp512 sight. Elevation ajustments is jank. Just position the sights accordingly. No clicks. But is works. Print on the side with tree supports.
Bring the Dymon 4000 Single Engine experience into your home cockpit with this complete DIY kit. A realistic single-engine throttle and control module inspired by modern general-aviation aircraft. No electronics knowledge required — just…
Wandhalterung für das Bosch E-Bike 4a Ladegerät (Smart System - BPC3400) Wall bracket for the Bosch E-Bike Battery
To proof, if a expensive rail mod is worth the upgrade, this is a minimal-invasive mod. i wanted the cheaper MGN12H carriage but it not fit between the v-slot holes. So, MGN12C is the way. Use M4x6.5 thread inserts and M4x10 screws. if a…
This mobile phone holder is designed specifically for the Xebex Trekker 4000 treadmill. The holder is mounted to the rear side of the Trekker console, providing an easily visible place for your smartphone during workouts. Mounts to the…
A stand for the AKAI EWI4000s. The design is split into two parts. It can be used as a whole while the top part (EWI Stand) can also be mounted on a standard saxophone stand instead of a flute or clarinet cone. Use an M5x25 countersunk…
This is a Magnetic Mount for the Kasa KC400 Smart Camera. The magnet is encapsulated so you will need a pause at layer 18 to insert it. Not sure how much it helped, but I did use glue stick on the top of the magnet to help with the…
i had a ZR250 quad and wanted a hex but couldn't find much, so i decided to try and make a fully printable frame and arms. every thing is to be self threading using M3 X 10mm. so far this is completely work in progress and im still…
![1:400 Scale Legend-Class US Coast Guard Cutter Model [No MMU Needed]](https://media.printables.com/media/prints/a1cfc934-a911-4e0d-b805-c42bab107685/images/13656485_2da4a641-4bef-4799-a465-f753ff66815a_3ad5877e-e449-4f75-94b5-648eb343ee59/gp3d_nsc_pr_002.jpg)
