1 / 4
Army Painter / Vallejo Paint Rack, Wall Mounted, 66 slot, 300x400
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Paint rack for Army Painter, Vallejo, Scale75 etc. Includes STL, DXF for laser. Wall mounted. NO GLUE. 66 slot.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 263
- Wydruki
- 3
- Wyświetlenia
- 1789
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (44)Powiązane
Paint rack for Army Painter, Vallejo, Scale75 etc. Includes STL, DXF for laser, and F3D. Wall mounted. Suitable for 3D printer or laser cutter (mountings need to be 3d printed).
Requires: 4x wall screws to mount, or 8 for an extra secure mount.
Print list:
- 11x Shelf
- 2x Side
- 2x Catcher A
- 2x Catcher B
Notes:
- The ‘left’ and ‘right’ shelves are identical, one is just upside down.
- Print/cut one side and one shelf to test fitment of the joining slots and tabs. Use the XY Contour Compensation setting to adjust for fitment
- To mount the Catcher on the racks, remove the top 2 and bottom 1 shelf. slide the Catcher into place, and replace the shelf. The shelf holds the Catcher in place, and the Catcher is screwed into the wall.
Commercial License: Message me if you want to sell these! I'm super open to it. I just don't want a big corpo scooping the design.
Please let me know if there's anything that might be improved!