Insert for BaBo Duo Drawer 60 for spray can 400 ml
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for the BaBo system by @Willi, for the 60 mm drawer, to store a 400 ml can, eg. 3dlac adhesive spray.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An insert for the BaBo System, created by https://www.printables.com/@Willi .
This insert is designed for the BaBo Duo 60 mm drawer to store a 400 ml can of 3dlac adhesive spray.
Print twice, it's mirrored.
There's a bolt and a corresponding hole to make it fit well.
I made it some 3 mm lower to compensate for the bottom of my 60 mm BaBo drawers - they all have bumps for some reason.
2026-01-17: Willi has updated his drawer models for stronger support - no need for the 3 mm cut-off in newer drawers...
2026-03-06: updated for the stronger drawers, full 60 mm heigth
Could have added more cutouts, and in the beginning there have been more, but in the end one ends up with lots of 1x1 boxes, each being 60 mm high, being not very useful tbh. But feel free to modify as long as there is space for your needs.