P
PrintablesFabrigator
Mug Spray Cover
This was designed around the libbey 12oz all purpose mug.
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
Wyniki wyszukiwania: spray
Liczymy pasujące modele…
P
Printables
Glow Stick Spray Gun
Made these for a local school for their Homecoming float. They were Kindergarten Exterminators. So I figured since it used glow sticks it would make a good safety light for some trick-or-treater. The parts are printed as such. Tank Top…
P
Printables
Spray shaker for drill (parametric)
A spray shaker for drill. You can use it with your drill to shake very well your spray. Is standard but parametric, so you can adapt it if your spray has unusual size. Is for M6 screw (parametric, so you can change it) and the hole is so…
P
Printables
IKEA Skadis - T-Clip System - Spray Bottle Holder
Fits one Spray Bottle. Prints without supports. Uses full-size T-Clips . Maintains its orientation on the Skadis board via a protrusion on the back that slot into the Skadis holes. I tested with several different spray bottles at home and…
P
Printables
Insert for BaBo Duo Drawer 60 for spray can 400 ml
An insert for the BaBo System, created by https://www.printables.com/@Willi . This insert is designed for the BaBo Duo 60 mm drawer to store a 400 ml can of 3dlac adhesive spray. Print twice, it's mirrored. There's a bolt and a…
P
Printables
Spray stick for miniatures
Assembly For assembly you'll need one M3 screw, anything between 8mm and 30mm length
P
Printables
Spray can WD40 Holder 70mm
Spray can holder, i use it for WD40. Internal diameter 70mm Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30%
P
Printables
Wall mount for IPA spray bottle
Small wall mount for a spary bottle with a diameter of 78mm. You also need 2 screws 3x16mm to connect it to the wall. I printed it in PETG Kleine Wandhalterung für einen Isopropanol Sprühflasche mit einem Durchmesser von 78mm. Man…
P
Printables
Fire spray extinguisher holder
Printed from PETG, 3 perimeters, 20% infill, 0.25mm layer height.
P
Printables
Paint Spray hexagon cammo stencil 10x10 cm
Paint Spray hexagon stencil 10x10 cm for example to painting guns or accessory Print settings Layer 0,2 4 walls 15% infill no supports
P
Printables
Paint spray stencil cammo hexagon 21x21 cm
Paint Spray hexagon stencil 21x21 cm for example to painting guns or accessory Print settings Layer 0,2 4 walls 15% infill no supports
P
Printables
Wasp Spray Can Pole Mount
Here are parts capable of mounting a common 66mm diameter spray can (i.e. wasp poison or spray paint) on a 20mm to 30mm pole, with a thin rope or string to actuate the spray. NOTE: Most wasp spray is not designed to spray with the can…
P
Printables
Superba Dishwasher upper spray arm pin
This is a replacement upper spray arm locking pin for the KitchenAid (made by Whirlpool) Superba dishwasher, model KUDS01DJWH0 (and possibly others using the same friction-fit system). The original part is discontinued, so I…
P
Printables
Spray can handle Eurocans maybe more
Print in place no screws make sure it fits your cans and pull the can strait out don't bend it up i press my thumbs in the front of the holder. Perfect for rattle cans so you don't get paint on your hands.
P
Printables
Horizontal Spray Can Holder Bracket
There are many holders for storing spray cans vertically. I wanted to install my fire extinguishing spray under the cellar stairs, where it only fits horizontally. I couldn't find anything for this. Here is my solution. For spray cans,…
P
Printables
Vileda 1-2-Spray mop replacement part
The connection from the trigger inside the Vileda 1-2-Spray mop broke so I designed a new one. It’s my first design in Fusion 360. It is mainly functional. I added the Fusion file so feel free to edit it. I printed it on an Ender 3 V2…
P
Printables
Aerosol / Spraycan Holder for Multiboard & HSW
Design Concept This holder is perfect for keeping aerosol cans such as insect repellent, spray paints, or air fresheners conveniently accessible and organized on the Multiboard or Honeycomb Storage Wall System . It is ideal for use in…
P
Printables
Micro-Drip Sprayer Extension
Simple Extension to have the Sprayer a bit higher. Fits the 4.6mm line. I used ASA as its fairly thin and will be used outside.
P
Printables
Chain Spray Nozzle 360°
With this spray can attachment, the chain can be evenly sprayed on all sides. The attachment can be mounted onto standard spray heads and extension tubes. Inside the attachment, the liquid is distributed through channels to 6 nozzles .…
P
Printables
wall-mounted spray holder with invisible screws
FR : support de spray mural , en deux partie pour que les vises ne soient pas apparentes. EN : Wall-mounted spray holder, in two parts so that the screws are not visible.
P
Printables
Aquarium Spray Bar for 12mm
Spray bar attachment designed to fit aquario neo lily pipes 12mm. Designed for low flow for shrimp tanks. The actual dimensions it fits is 13.2mm OD. I have two iterations of this, one with some additional reverse nozzles for even lower…
P
Printables
Glade Automatic Sprayer Retaining Cap
A small cap to fit the glade wall sprayers to keep the front from opening.
P
Printables
Golf - Golf Ball Stencil Paint Spray Jig Holder
Golf ball spray paint jig that can paint up to 7 golf balls with stencil patterns at a time using compatible stencils (below). Ergonomic design makes it easy to open and close jig assembly to better grip and hold ball in place while…
P
Printables
Ryobi 18V ONE+ Power Sprayer Wall Mount (P2800)
Ryobi 18V ONE+ Power Sprayer Wall Mount (P2800) This wall mount is designed specifically for the Ryobi 18V ONE+ Power Sprayer , providing a clean, secure way to store your cleaning sprayer when not in use. Perfect for garages, utility…
P
Printables
Wall mount holder for IKEA Myggspray motion sensor
Wall mount holder for IKEA Myggspray motion sensor. A flexible wall mounted than the one that comes with IKEA Myggspray sensor. I have also made a holder for clips and a wall unit without holes. All based on the remixes that have been…
P
Printables
Pegboard/Skådis spraycan holder with size brackets
Summary This is a spray can holder with brackets to be used on a IKEA SKÅDIS pegboard. The holder has a 66 degree tilt and is stackable sideways (and of course vertically, depending on what bottle you are using). The holder comes with a…
P
Printables
Parametric Cylinder Holder for 3DLAC Spray For Honeycomb Wall Storage
I wanted to get my 3DLAC spray can off the table and looked around for Honeycomb storage made popular by RostaP. I found this one by @thesambu and wanted to modify it to hold my aerosol can. It was 50mm so I bumped it to 54.5mm to hold…
P
Printables
Harbor Freight Texture Sprayer Nozzle
This is the changeable nozzle for the Harbor Freight air texture sprayer 2471, which is probably a decade old. The current model number has changed, but I suspect the nozzle fit is pretty much the same. The file is done in openscad which…
P
Printables
Spray Can Holder for US General Tool Cart
Spray Can Holder for US General Tool Carts from Harbor Freight. Holds 4 standard cans. Has slots for magnets, but not really needed. They snap on the side of the cart pretty tight.
P
Printables
KD12WW1 Dishwasher upper spray arm coupling nut
this is the nut for an upper spray arm in a Kelvinator dishwasher. It will also, more than likely, fit AEG or Electrolux models. I designed it because I could only find models that had 4 notches instead of the 3 that I need.
P
Printables
High Surface Spray Portable Eye Wash Station w/ Snug-Fit Water Bottle Adapter (Self-Administerable)
OPTION: With or without supports Self-administerable portable single eyewash station. Crossover water flow for maximum eye surface exposure and water pressure. Adapter point accommodates standard commercial water bottle openings for quick…
P
Printables
Wiley-X SG‑1 Ballistic Goggle Seal - Flexible TPU Gasket for Tear‑Gas & Pepper‑Spray Protection
A TPU gasket for helping seal the Wiley-X SG-1 glasses against chemical agents such as teargas or pepperspray. The SG1 glasses/goggles are great for ballistic protection for protestors/observers, and are one of the only ballistic glasses…
P
Printables
Spraydosen Halter – Modularer Wandhalter für Werkstatt & Garage
Beschreibung Dieser Spraydosen-Halter wurde entwickelt, um Ordnung in das Chaos von Lack-, Reinigungs- und Schmiermitteldosen zu bringen – ohne wackelige Regale, ohne Umkippen und ohne Gefummel. Das System besteht aus einzelnen,…
P
Printables
Spray Bottle Wall Mount
This mount holds a spray bottle up to 3-3/4" in diameter. It can be printed with no supports. It measures 3.94" high and has two mounting thru holes. I printed mine in PLA with 10% infill and 3 perimeter layers.
P
Printables
Blanco Sonea pull-out spray magnetic holder
Description This is a replacement holder for the pull-out spray of the Blanco Sonea faucet. It sits on the magnet and holds the spray head in place. The original part is not available as a spare accessory. I modeled this part myself with…
P
Printables
Bear Spray Safety version 4
This is an advanced bear spray safety that can work with all bear spray cans. Very useful for small outdoor businesses that need a way to solve to problem of tourists thinking it is bug spray, that they will actually need it, etc. It has…
P
Printables
ZEP Professional Sprayer Broken Neck Repair
This model will (hopefully) re-bond a sprayer with a broken neck (when it breaks right above the cap). For broken thread see the link below. This model may be snug. The inserts should meet and produce a closed seam. If you have problems…
P
Printables
Air Filter Case for DIY Airbrush Spray Booth
I built an airbrush spray booth using white cardboard sheets. I designed this air filter to pair with a computer fan to exhaust the paint fumes.
P
Printables
Expo Marker holder with Eraser and Spray
Designed in Shapr3D - I needed an Expo marker holder that could also hold the spray bottle. Here are the magnets that I used for the back. Just a little hot glue will hold them in place. :…
P
Printables
Shower Hose Banana Cleaner – Internal Spray Design
This model is a banana cleaner that screws directly onto a standard shower hose . It is designed to clean bananas by directing water jets from the outside toward the inside , helping to rinse the peel evenly and efficiently. The cleaner…
P
Printables
Automatic Spray Module Servo-Based
A compact, 3D-printable module that automates pressing the valve on a spray bottle using a servo motor. Key Features: Universal Design: Works with most standard freshener bottles. Easy to Print & Assemble Fully Controllable: Use an…
P
Printables
Magnetic spray can holder
require 20mm x 4mm magnetic, may need some glue to keep magnets in
P
Printables
Spray bottle holder
Inspired by the spray bottle holder from Practical 3D Prints , I made a hook mount for my kitchen cleaner spray bottle. Although inspired, it's a new model from the ground up, to suit my needs more specifically. It uses the same amount of…
P
Printables
Spray Can Holder
This wall-mounted spray paint holder keeps your cans organized, secure, and easy to access in any garage or workshop. Designed for strength and space-saving efficiency, it’s a durable and practical 3D printed solution for clean,…
P
Printables
3DLAC Adhesion Spray Cap
The original caps on 3DLAC Adhesion Spray easily cracks. They are also made with PP and cannot be glued back using regular super glue. Here is a handy replacement. Modelled in Autodesk Fusion 360 and fits perfectly!
P
Printables
under shelf spray can holder
I keep most my cans in a box but there is a few including spray adhesive and primer that I use regularly so I started looking for some wall mount solutions but nothing really caught my eye or used too much filament so I overdesigned and…
P
Printables
Airless sprayer accessory wash bucket sieve
Easily resizable sieve to fit your bucket 90 mm diameter 135mm height
P
Printables
Spray Bottle Holder w/Flat Bottom
The flat bottom improves print bed adhesion and ease of print/quality by removing steep overhangs in the 1st couple of layers (see slicer image).
P
Printables
Soda Can Spray Fusion
📝 Description This model is an artistic reinterpretation transforming a Soda can into a spray paint. It’s the perfect piece to decorate a maker’s desk, a collector’s shelf, or an artist’s studio. The design was created to be printed with…
P
Printables
Hoover CleanSlate spray trigger seal replacement
The original nozzle trigger/piston mechanism on my Hoover CleanSlate stopped spraying properly and would only drip. Grease was not a real fix, and in my case it was not needed at all. The real problem seems to be the original rings: for…
P
Printables
Universal Spray Bottle Holder With Side Towel Slot
A practical wall-mounted spray bottle holder designed for bottles with a spray trigger width up to 30 mm . The left side includes a modern slot for hanging a towel or cleaning cloth , allowing you to keep everything you need neatly…
P
Printables
Simplified Spray Bottle Holder for Honeycomb Storage Wall!
Remix of the Spray Bottle Holder by zhollis21 and Ellrico in an attempt to make it simpler to print and improve strength. I like the simplicity of the base design but was not fond of the snap-in honeycombs and how they complicated…
P
Printables
robust spray bottle holder for pegboard
A pegboard spray bottle holder. Fits a 3x2 section of pegboard. The pegs are quite snug so use a bit of caution when installing and removing. I printed mine in PETG and they're more than sturdy enough for a 12oz bottle of rubbing alcohol…
P
Printables
Spray paint stencil maker
Stop struggling with paper stencils that tear or bleed under the spray can. This parametric stencil generator creates sturdy, reusable painting templates with perfectly calculated bridges so your letters never fall out. Whether you need a…
P
Printables
Simple Reliable Garden Sprayer | 1/4" Irrigation Stake Design
Howdy guys and gals! I wasn’t quite satisfied with the garden sprayers I could find in the store, so I made my own! It has an integrated stake and features 8 small streams that spread to a little more than a 12" diameter. It puts out a…
P
Printables
Ryobi Sprayer Holder OWS1880
This is a sideways hook style mount for the Ryobi OWS1880 Sprayer, it allows you to mount it to the wall. I store the batteries seperate, however it will take the battery weight as well Mounted with standard No.8 screws
P
Printables
nitrolingual spray case
This model is for a travel case for nitrolingual spray (GTN) to help keep the glass vial safe.
P
Printables
Spray Paint Can Shaker
I printed another design like this, but it fell apart quite quickly. I took inspiration from that design and created this model that is a little more sturdy. I also printed in it in PETG for increased strength. The cans that I need to…
P
Printables
Graco sg3 spray gun back cap replacement
I had my Graco gun go down on me during a job so I created this model for the Graco sg2 and sg3 spray guns I hope it helps. If there is any adjustments needed please let me know.
P
Printables
Karcher spray gun part
A replacement part for Karcher water spray gun. Easy to print, more difficult to attach to the spray gun. I used Prusa PC Blend, 0.2mm layers, 5 walls, printed on MK3, works like a charm. KSL 260331
P
Printables
Replacement Handle / Grip for Gardena Pump Sprayer
EN Replacement Handle / Grip for Gardena Pump Sprayer (PETG) DE Ersatz-Handgriff für Gardena Pumpsprüher (PETG) Description (EN) Replacement handle/grip for Gardena pump sprayers, designed from scratch in FreeCAD. The original plastic…
P
Printables
Spray can holder - Sprühdosenhalter
Spray can holder for cans with 66mm diameter - Sprühdosenhalter für Dosen mit 66mm Durchmesser
P
Printables
Sprayser Water Control Knob
Does not require any modification to original file set. We love our Sprayser and figured we would share this subtle functionality upgrade with the rest of the community. Looking forward to washing the car with this!
P
Printables
Spray Bottle Hanger for DDD Wall Control
Spray bottle hanger compatible with the DDD Printable Wall Control System ( https://www.printables.com/model/52618-ddd-printable-wall-control-system Additional parts needed: A left and right 2x0 DDD Flat for mounting. Four (4) 4x8x10mm…
P
Printables
Wall-Mounted Spray Bottle Holder - ALPHAPRINT
A simple and sturdy wall-mounted holder for spray bottles, perfect for keeping your 3D printer cleaner (or any similar spray bottle) within easy reach on your desk or workbench. The holder attaches to the side of any table or shelf with…
P
Printables
Spray Gun - Rotary Valve / Stříkací Pistole - Otočný Ventil
Spray Gun - Rotary Valve / Stříkací Pistole - Otočný Ventil Díra šestihranu = 5,9mm
P
Printables
Wall Mounted interlinking Spray Can Holder
Stop letting your spray cans roll around your workspace. This Modular Interlocking Spray Can Holder features a dovetail "chain-link" connection system that allows you to snap as many modules together as you want and expands to fit your…
P
Printables
IPA Spray Bottle Holder for Storage Rack
The hole for the bottle has a diameter of 50 mm. The total height is 60 mm and the base is 2 mm thick. This results in a usable interior height of 58 mm. Please refer to the images in the photo gallery for the exact dimensions of the…
P
Printables
Stacking paint spray stands
I made these tripods to support objects above my turntable inside my paint spray booth. I previously had a set of three stacking pyramids which were great for large objects but didn't work for small sizes. These work great for smaller…
P
Printables
No Step spraypaint stencil 2x4
This is a stencil for spraying NO STEP onto the edge of a 2x4. It has tabs that keep it steady on the 2x4.
P
Printables
MultiBuild Spray Bottle Holder (Multiboard / MultiConnect)
This is a simple spray bottle holder for use with MultiBuild plates. You need 2 of the MultiConnect connectors. Fits bottles up to 3mm wide at the trigger / head. No supports needed.
P
Printables
Isopropyl Alcohol Spray Adapter
Transform your standard Isopropyl Alcohol bottle into a convenient spray bottle for quick and effective print surface maintenance. I designed this adapter to bridge the gap between common household spray heads and the standard threads…
P
Printables
Wagner Paint Sprayer - 800mL Container and Lid - 0413909 - W100 W150 W200 W300 Series
Container, lid, and lid gasket (print in TPU) to suit Wagner Paint Sprayers, series W100 W150 W200 W300 (e.g. W350 which I have). I would highly recommend sealing the inside of the container with epoxy resin. I used 24g resin and 8g…
P
Printables
Grandpa's Spray Can Nozzle Reverse Innovator
At my workspace I use all spraycans through their long pointy nozzles. Since some designs have changed, I didnt like them occasionly falling out of position when using them. This is my quick workaround for my personal preferenzes and…
P
Printables
Wagner Fence and Decking Sprayer Funnel
A funnel for the Wagner sprayer bottle to avoid spilling paint when pouring it in.
P
Printables
HSW Bed Spray Bottle Holder
This is a simple HSW spray bottle holder, nominally for bed adhesion spray. It is very easy to print with normal setting though you will need a 3mm screw insert and a hollow insert from the original HSW which you can find here: Just…
P
Printables
Spray paint inspired Soda Can holder
this model is Perfect for going to the movies and you want to stick out and be unique
P
Printables
Spray Bottle Holder For U.S. General Mini Toolbox
This spray bottle holder is designed to provide quick and convenient access to a small spray bottle right on your toolbox. It securely fits bottles with a diameter of 33 mm or smaller , with about 2 mm of wiggle room when using a 33 mm…
P
Printables
Peper Spray Holder
Specially designed car compartment holder that securely stores spray bottles in a fixed position, preventing unwanted movement while driving Keeps spray containers stable and protected from rolling, tipping over, or getting lost inside…
P
Printables
Pyramid as a base for painting, coating, spraying paint
Hello, I have a Pyramid for you as a stand for painting, coating, spraying paint . Great thing when you have to paint or spray boards, larger pieces. Then it doesn't lie on the ground. It's better to spray, paint with a brush. There is a…
P
Printables
Omnidirectional spraying nozzle for garden hose
Useful for washing down the inside of pipes, for example boat trailers. Important: This requires supports around the opening where the water comes out. Gardena version:…
P
Printables
Spray can holder - Sprühdosenhalter - IKEA Skadis
The model was derived from https://www.printables.com/de/model/166065-spray-can-holder-spruhdosenhalter Here the IKEA Skadis-compatible variant and further diameter 100 mm (maybe a bit too large for the construction) 66 mm (original) 64…
P
Printables
O-Cedar ProMist MAX Microfiber Spray Mop Hanger
Updated March 2026 - they changed the mop style and it's slightly thicker
P
Printables
nasal spray tag
A small color tag for your nasal spray bottles. Useful in this flue ridden time so you and your family members don't switch it up accidentally. I used PETG so it snaps on nicely.
P
Printables
Multiboard Spray Bottle Holder
A bottle holder for my isopropanol spray bottle, compatible with [Multiboard](https://www.multiboard.io/). The bottle has a diameter of 73mm. My print settings: Printer: Anycubic Kobra 2 Max Material: PLA Infill: 15% Infill Type: Gyroid,…
P
Printables
Spray Bottle Hanger Rack
This is spray bottle hanger rack. A perfect solution to store your spray bottles in a convenient way. You'll need a 8mm rod of your choice; it can be wood stick, smooth rod, M8 thread rod etc. You can even 3D print a rod if you would like…
P
Printables
Multiboard Tray for Ikea Pepprig Spray Bottle
Gone down the deep end on Multiboard? Me too! Check out my collection of Multiboard Models here! Comments Hang your Ikea Pepprig Spray bottles on the wall with this easy to print and install hanger. Printed with default settings. Then i…
P
Printables
Gardena 18330-34 Spray Lance - Sprinkler disc retainer
Sprinkler disc retainer Tested on: Gardena 18330-34 Works most likely on: Gardena 18330-20 Gardena 18330-31 Gardena 18330-32 Gardena 18330-33 etc Mine is assembled without an O-ring, but if you need one, I've added a file that can work if…
P
Printables
Vileda SprayMax 1-2 connecting thingy
Print it however you like i did it vertically but horizontally will be better but it will need more support. I print it on raft because for some reason petg supports stuck for good on the buildplate and raft is easier to remove. Filament…
P
Printables
Hydraulic Spray Bottle Actuator
For Foot Pedal Assembly go to https://www.printables.com/model/905807-hydraulic-foot-pedal If evaporation becomes a real problem use hydraulic fluid or mineral oil Required BOM: Vinyl Tubing 1/8"ID X 3/16"OD…
P
Printables
Bear Spray Bicycle Bottle Cage Adapters
Designed around a 7.9oz / 225g bear spray bottle with a 2" diameter. I can adapt this if you have other needs. I also considered a parametric model but not there just now. AUG 20 2025: Added model for 10.2oz / 290g bottle with 2.25"…