Peg board spray paint can holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A support for a standard (US) sized spray can, for pegboards via Universal Peg Board System
- Ocena
- 5 / 5
- Polubienia
- 213
- Pobrania
- 683
- Wydruki
- 5
- Wyświetlenia
- 2691
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
The Universal Peg Board System is a mechanism for printing pegs and the useful part separately. This is a useful part that holds a spray can. It has a railing that keeps it from falling off during a mild earthquake (welcome to California). You only need two pegs really. The 3MF shows my slicer settings, but I use a 0.6mm nozzle so you probably want to modify it before you generate your g-code. The back of the thing is from Universal Peg Board System and the actual circle and rail are mine.
The underside of the sloped railings is a little funky with a 0.6mm nozzle. Maybe better with a 0.4. It does the job, but it looks ugly if you peer closely at it from below.