Chain Lube Overspray Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The snap-on overspray protector as sold by O.K. Wack Chemie under the name "SauberSepp" or "CleanBob"
- Ocena
- 5 / 5
- Polubienia
- 934
- Pobrania
- 1709
- Wydruki
- 10
- Wyświetlenia
- 10 979
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube inside. The reservoir has rounded corners for ease of cleaning, I have added the nozzle guide to keep the nozzle aimed properly and not spraying past the shield, and I have also added a top ring which allows you to cap the spray bottle with the overspray protector still on.
It is still fiddly on my motorbike, as there is little clearance on the lower run of the chain, and it has no centre stand so it's even more cramped. I have designed a quite generously large shield, but still, some mist still escapes. I might add a catcher for it if I come around to it.
It should work in whatever you print it. I have mine in PLA, used quite a bit, and it still hasn't decayed because of the lube, though it is a bit too stiff. Probably PETG would be a better option. But even if it breaks down - just print another one.
Edit: if you need one for a bigger can, check out the remix https://www.printables.com/model/1389358-chain-lube-overspray-protector by @DanielNeimay_2259191