235 modeli
Overspray protector as sold by my favourite motorcycle (and bicycle) care product manufacturer, O.K. Wack Chemie, under the name “SauberSepp” or “CleanBob”. Of course, mine is better :) I have added sides to the reservoir to keep the lube…
A simple remix of the MKII applicator for superlube tubes. Like the MKII simply insert and then twist until resistance and then apply the lubrication. Use the lid to cap off the applicator end.
This attachment enables a spray can to spray a stream of Oil/Wax or Brake-fluid directly and only to the chain (i.e. avoiding overspray onto bike frame , tires and disk rotors) , less mess, less waste and more time to ride…….. I am blown…
Print recommendations: PETG ist most likely the best thanks to it's slight flexibility 0.1mm or 0.15mm layer height recommended due to the small hole the lube goes through 3 perimeters work great. 2 is probably maybe also enough.…
Information: The width of the adaptor where chain pass is around 10 mm. Print settings: Step: 0.3 Shell: 3 Infill: 30% Supports: No Filament: PLA
Update : 7 May 2024 : Added V2.1, 20mm extra length to reach Bambu rear screw rod 14 April 2024 : Added 2 Caps ! V2.0 : A Simple Screw Rods Adapter for the Superlube 21030 Tube Fit all the 8mm OD 2mm spacing rods Easy to print without…
Revised to allow printing without overhang and minor geometry changes.
Purpose: Tool for lubricating LM8UU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. Are you looking for the same tool with screw cap for the original prusa grease tube? Look here:…
Always wanted a nice custom lube station to go with your premium mechanical keyboard? No money for the next GMK group buy? Why not brighten up your lubing chores with a lube rectangle you can really call your own. Or just showcase your…
Mr. Lube is a tool for lubricating 8mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread). I’ve included a cap that seals the tool and has a male thread in the end to store the standard…
New version available ! I made a remix of this grease packer so it can be be used to quickly and easily apply PTFE grease to 8mm lead screws. Specifically fit to the Super Lube 21030 (3oz) tube so I can get it on the rear lead screw on my…
A "lube station" or "mod station" for mechanical keyboard switches (Cherry MX/Kailh). Inspired by the many lube stations out there, this one includes a receptacle for the spring, stem, and lower housing. On the side is room for brushes,…
Use case This part fits very snuggly on a can of Dr. Wack chain lube spray for motorbike chains. I would guess that these cans are standardized, so chances are that the shield works for other brands a well. If not, scaling can be a way to…
Nozzles to pack 8 and 10mm linear bearings plus caps
přípravek na mazaní řetězu motorky
After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes. Just slide it in carfully, press and rotate the bearing - done…
UPDATE 05/08/2025: added a variant for 11/12 speed chains (thanks @GrzegorzZ) UPDATE 28/07/2025: after further testing and reviews the model geometry was updated to avoid wicking lube to the sides This is an applicator for Squirt Chain…
Linear bearing grease cap for 8oz Super Lube Inspired by: https://prusacommunity.com/set-your-bearing-straight/ Improved version 2 adds these features: alignment notch so its easier to line up with the bearings tapered openings for a more…
The applicator end is unmodified. Threaded end is enlarged and modified to have a 9/16-16 UN thread to fit an 85g Super Lube tube. Note: the thread dimensions were found by trial and error, so might not be exactly right, but seem to fit…
You can use a screw and nut in the top hole to secure the cart for storage https://a.co/d/5vAbloZ I used these grease nipples. I needed to heat the nipple and screw it into the cart. might need to make the threads bigger
This is my remix of Linear Bearing Greasing Cap by walter to fit on small 12g tube of Super Lube. It is only for LM8UU (8mm) bearings. You have to cut off the tip of the tube just above the thread like I did (check pictures). I have…
Use 1xM3 screw from your rail or carriage to secure the carriage in place for store or lubing.
I made a remix of this grease injector and cap , so it can be printed faster . It's specific for the Super Lube 21030 (3oz) tube. So now the cap and the injector are shorter, so you save time and material. You have 3 profiles: 1 injector…
At the request of a biker friend of mine, I've extended the edge facing towards the bike to further prevent overspray onto the bike's frame, engine and wheel.
Lubing my chain is always a bit of a pain as I try to get a steady stream of lube on the chain with one hand and rotate the crank arms with the other. Invariably, somewhere along the line the tip of the bottle slides off the chain causing…
Motorcycle Chain Lube Tool (525/530) Tool for lubrication of a 525/530 motorcycle chain. Print text down, no supports required. Use a releasable zip-tie through the channel to secure the tool to the aerosol. Cut the straw to length, so it…
Little helper to inject grease into Misumi LM8UU and LMU8 bearings. The injector is designed to fit Nigrin 74145 multipurpose grease, which is one of the recommended lubricants for mentioned linear bearings. The thread size is M24 x 3 I…
Fits SuperLube 3 oz Silicone Lubricating Grease, model 92003. Features Long nozzle to apply a bead of grease along the leadscrew as well as making it easier to access hard to reach areas. Tight threads to eliminate leakage when applying…
Superlube 21030 works great for 3D printer bearings. I want to put some into my Sainsmart 3018 pro desktop router, but the bearings are 10mm inner diameter, 30 mm length (and 58 mm length). I remixed the LMU8 bearing injector to fit a…
Made to fit the Creality Ender 3. This design supports 10 switches per row. Supports top housing, stem, spring and bottom housing.
Parameterized lube station for your mechanical keyboard switches or a simple switch display plate if you choose the cutout size to exactly fit Cherry style switches (14x14mm). How to print Orientation: Face down (no supports) Perimeters:…
This is an needle applicator tip for the Super Lube 3oz bottle (with M14 threads) as well as a new cap. I'm using the 92003 Super Lube, but any bottle with M14 threads should work. I needed an easy way to get a small amount of grease in…
Ich habe mir dieses Schmierschild konstruiert, da beim Kettenschmieren mein Motorrades immer einiges daneben spritzt.So muss ich weniger putzen. Die Aufnahme geht auf die 300 ml Dose weißes Ketten-Spray von Procycle / Louis. Der Falz an…
This cover sits over the rear disc brake and caliper on your bike to protect it from contamination when spraying lubricant on your drivetrain. Print with 100% infill, no supports required. Fits on the build plate of an Ender 3.
Honeycomb wall holder for Super Lube. My wife thought it was for something else.
Holds a 3oz tube of superlube, has a 33mm hole that's 13mm deep. Has a hole in the bottom of the holder to glue magnets in to hold the bottle. I glued magnets in the hole and in the cap of the bottle to help hold it in better and give it…
I printed the orginal file and realized it was for a bigger tube. I used the STEP file to remix it for the 85 gram tube i bought here in sweden. Print instructions Print accoringly to Super Lube 8oz by Dan, see his instructions below:…
Object description: Tools for lubricating LM10UU and LM10LUU bearings with a 85g tube Super Synco Lube DE21030 synthetic grease and a screw cap. The longer version for LM10LUU-bearings is available in two versions. Version 1 - with small…
Needed a tip to screw onto the tube so I could squeeze some grease into a small space.
You can buy these thing, but I printed it myself. It fits to spray bottle´s with 57mm in diameter, for example from S100. I decide to make the diameter 57,8mm, because as on the picture you can see, it´s a very tide fit. I also added some…
The Mechit-Lube! A SciFi War Robot chop shop for Generic SciFi War Robot tabletop play, at 6mm scale. Step inside. Here you can: Ask to Apprentice. Visit speed shop. Have 'Mechs repaired. Buy 'Mech ammunition. Talk to others. Leave the…
This adapter allows the Prusa lubricant bearing pacifier included with Prusa printers to be attached to a 85g tube of Super Lube. Recommended settings: PETG 0.15 mm 15% infill
Modified to fit the super lube grease threads a little better and fit the LM8LUU. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PLA Category: 3D Printer…
I was looking for a way to just use a nozzle to grease carriages while still on the linear rail. Lots that allow you to grease round bearings, like the one that this was remixed from. So the smaller one fits in the hole, in a linear rail,…
Print info. Material: ASA Rafts: No Supports: No Resolution: 0.2 mm Infill: 15% Perimeters: 2 Solid layers top/Bottom : 3
It is more convenient and has easier use. Looks better as well.
It holds Super Lube Oil
Couldn't find a Super Lube Applicator with a pointy tip, so I made this. The end may need to be snipped off depending on your printer's cooling. You may have to use a lot of force to get lubricant out, since the end is so small! Used this…
I made this adapter for SuperLube 85g greese tubes. It screws right ontop if the tube, then you can screese greese out to appli to thread screws. No need to get your hands dirty ;) No need for support! Printed with a Kobra 3 Combo in…
Having received the bottle from Amazon without a cap, I decided to quickly model something for peace of mind in transporting it.…
Gridfinity holder for SuperLube Grease tube. It uses 1 slot.
Gridfinity block for the 4oz bottle of Super Lube. Doesn't interfere with blocks next to it.
I really liked the idea of being able to keep my tube of Super Lube on the wall but after printing HSW - Super Lube Grease Tube Holder and knocking it down many times I decided to recreate it giving it a much more snug insert. The insert…
02 March 2022: The thicknesses have been increased due to some feedback. We designed a nozzle for SuperLube Grease to lube the bearings
I remixed the file to make it easyer to print without supports.
blueberrinni octopussini generated with AI Image used for generate 3d model added in picture gallery Background of image removed with: Adobe lightroom / You can also use Microsoft image editor, which have implemented automatic background…
Multiboard Push-Fit Super Lube 22oz (41.5mm) Holder.
Two different models to print, one basic that you can personalize how you like and one with yamaha logo inscribed to print on same layer in different colors like in the photos. In the "same layer" models you need to put the color face on…
Estatueta do Galo Volpi - Clube Atlético Mineiro. Melhores resultados com placa PEI texturizada ou PEO / PET (uma parede na primeira camada). Remix devido a base não ser o escudo do Galo, que é separada no modelo original.
Wanted a place to keep brushes, lube etc so remixed this, Holes are: 2x 38mm lube pot holders 1x 21mm oil bottle holder 3x 4mm brush holders 1x 8x2mm tweezer holder 1x 9mm stem holder holder
Remix of these things. (Couldn't add them to the remix list) Compact mechanical keyboard MX switch lube station by mkrludo - https://www.thingiverse.com/thing:4567333 Cherry MX and Kailh Key Switch Opener by l4u -…
The official logo for São Paulo Futebol Clube. The famous Brazilian football (soccer) team. I printed mine in PLA with 0.2 mm layer height and 0.6 mm layer width. I used Ironing on black and red top layers. Colors swap: Starts with White,…
Hello everyone! I'm bad at modeling! I threw together yet another grease applicator, but this one has a 90 degree bend so there's no need to remove the bearings from the Y-carriage to reapply lubricant. For 8mm bearings, 3oz / 85g Super…
Designed in FreeCAD. Also printed it in PLA for curiosity, but it was too tight, would need to be scaled up 5 to 7% at a guess to have a chance of fitting.
Smaller version of @Fonz's design to only fit 5x2 switches and stems. Sometimes you don't want to print big stuff and clutter your desk or take up more space in your storage. As not much has changed from the original design, it should be…
The holders I could find already on printable were very shallow and the bottle would tip forward and easily fell off. So I made a new one that is a little taller so the bottle stays upright. Fits a 3 oz bottle of superlube used for the…
This is an easy to print Z-Axis lubrication tool made with a minimalistic, light weight style in mind. its under a gram in weight and I found a 50% infill its very strong and it doesn't snap easy to print Verified works on Maker World by…
I couldn't find a normal super lube cap for regular use, not for packing bearings specifically, so I made one. Based on Pigeon 's design, with a quite a few modifications. Fit is great and function seems to be working quite well. I…
Dva různé rozměry podle hlazené tyče
Print data: Printed on a K1MAX printer +PLA infill: 20% brim: 5mm wall: 3 need support In addition, a GCODE file for cleaning and shielding the K1MAX printer
Fits on Küpper/Kuepper Pegboard and holds RCBS Lube Pad and Bottle for reloaders.
I used the model from Prusa Research as orientation, which is included with the printable parts for the XL. But I designed it completely myself in Fusion360. Super Lube: https://super-lube.eu/de/ Filament: use what you want Layeer height:…
Basic 1x1 ½ height Gridfinity holder for SuperLube. Gridfinity System This block is designed to fit into a Gridfinity base. Gridfinity is a modular organizing system and you can catch a video to learn more or look through the curated…
This chain lube adapter makes cleaning your motorbike chain a much faster and cleaner job. It's smart design allows for lubing chains with tight passages between swingarm and chain. Fits 520 and narrower chains and most chain lube cans…
Bought some Super Lube for my 3D printer and it was missing the little red bottle cap. So I designed and printed a replacement. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: .15 mm Infill: 30%…
Please note the width of your bike's chain, the slot where the chain passes through is 6,8mm wide. Special thanks to Gregg Schroeder ( @ravendesign_1507834) Print settings: Step: 0.2 Shell: 2 Infill: 30% Supports: No Filament: PETG GST3D…
This is an easy to print X-Axis lubrication tool made with a minimalistic, light weight style in mind. its under a gram in weight and I found a 50% infill its very strong and it doesn't snap easy to print Verified works on Maker World by…
Fits perfect as the bottle has a diameter of 41.5mm and the Gridfinity single square is 42mm. Meant for 4oz bottle. No supports required.
Took the existing LM10UU adapter into Blender and extended the open area by 26mm.
A guide to easily lube your bike chain
Holds a 410ml SuperLube Silicon Can on a HSW
Printed on my Neptune 4 Pro 4 Walls 25% Gyroid Automatic Tree Support (for the Hook)
My Super Lube tube had a M14 thread so I hacked the model in Fusion 360 to fit the tube. FIXED Category: 3D Printing
chain guard to hold the chain while applying lube ripped side wall to rub the chain while rotating the chain made using TPU
still WIP being too impatient to meticulously place a drop of super secret chain lube on each individual link, I modeled a guide to help with lubing the chain. It's currently designed around my printer's tolerances
An aerosol adapter with a 3.9mm stem for lubricating size 520 motorcycle chains. The width has been slightly increased, and the guides have been smoothed for better chain movement. Just in case, check that the holes have been printed…
Mechanical keyboard switch lube station. This is holds switches and stems. There are 2 sizes for 35 and 20 switches. Please checkout my other models on Printables
Superlube 3oz. tube cap adapter for use in greasing PrusaXL Tool Changer
While lubricating the Z linear rail on the A1 Mini some time ago I discovered a serious problem. The oil eventually ended in the components parts due to its viscosity and also gravity. While I know most of the lubricating oils are not…
GCODE file for cleaning and lubricating the K1MAX printer Contains G CODE file and utilities You have to start from the nearest left axis and then move to the right and then to the reverse. The position of the extruder symbolizes the axis…
Introducing the IKEA SKADIS Super Lube Oil Bottle Mount – the perfect solution to keep your Super Lube Multi-Use Synthetic Oil 4oz bottle organized, accessible, and ready for action. Say goodbye to misplaced oil bottles and messy…
Super Lube 4fl oz holster for Multiboard snap connection
Updated version of @Niffels 520 chain lube sprayer that is scaled to fit larger cans of chain lubricant.
This is an easy to print Y-Axis lubrication tool made with a minimalistic, light weight style in mind. its under a gram in weight and I found a 50% infill its very strong and it doesn't snap easy to print Verified works on Maker World by…
A remix for pushing lubricant through mountingholes of linear rails or other use-cases.
Holder for Ikea Skadis This holder is perfect for securely and neatly storing the following products on the Ikea Skadis pegboard: 1x Super Lube 21030 (85 grams) 1x Super Synco Lube 51004 (118.29 ml) Similar products from other…
Organize your workspace with this custom-designed 3D-printed holder for Bambu Labs 3D printer lube or grease packets. The sleek and practical design accommodates up to 10 packets, keeping your essential supplies within easy reach. Key…
*****Update 3/6/2026: Correct Rebated Magnum Tray uploaded. (oops)**** *****Update 3/3/2026: Added Rebated Magnum Tray and Test Piece***** Have you ever forgotten to prime your brass before loading the powder? Me neither. But if you think…
