Super Lube Needle Nose Applicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a way to get Super Lube into some tight spots.
- Ocena
- 4,5 / 5
- Polubienia
- 42
- Pobrania
- 353
- Wydruki
- 3
- Wyświetlenia
- 911
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is an needle applicator tip for the Super Lube 3oz bottle (with M14 threads) as well as a new cap. I'm using the 92003 Super Lube, but any bottle with M14 threads should work.
I needed an easy way to get a small amount of grease in some tight spaces. By default, it will take a good amount of squeezing to get a very small amount of grease out.
Just cut the nozzle shorter to dial in how much flow you want.
Printed with 3 walls in PLA or PETG. Make sure you have plenty of cooling since the layer times are pretty small at the end.
Thanks to @vindolin for the original cap design!