Super Lube Needle Nose Applicator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a way to get Super Lube into some tight spots.
- Rating
- 4.5 / 5
- Likes
- 42
- Downloads
- 353
- Makes
- 3
- Views
- 911
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is an needle applicator tip for the Super Lube 3oz bottle (with M14 threads) as well as a new cap. I'm using the 92003 Super Lube, but any bottle with M14 threads should work.
I needed an easy way to get a small amount of grease in some tight spaces. By default, it will take a good amount of squeezing to get a very small amount of grease out.
Just cut the nozzle shorter to dial in how much flow you want.
Printed with 3 walls in PLA or PETG. Make sure you have plenty of cooling since the layer times are pretty small at the end.
Thanks to @vindolin for the original cap design!