Liczymy pasujące modele…
For the easier application of static grass on the model of railway, I created a model of grass applicator. For more details, check the article: https://blog.prusaprinters.org/3d-printed-railways-size-h0-187/ Print instructions Everything…
Wydruk około 0,67 €–0,81 € nettoWstępna wycena jednego wariantu
If you accidentally throw it away, here it is without buying it again
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
The Assistive Nail Polish Applicator aids users with low pinch strength to open, apply, and close nail polish. The device can be held by hand, worn on a finger, or worn over the hand. Print Settings Infill : 20% Resolution : 0.3mm…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
For the easier application of gravel on the railway model in H0 scale, I created a tool where you can pour the gravel and applicate it easily on the railway. Check more info here:…
Wydruk około 2,52 €–3,09 € nettoWstępna wycena jednego wariantu
A simple remix of the MKII applicator for superlube tubes. Like the MKII simply insert and then twist until resistance and then apply the lubrication. Use the lid to cap off the applicator end.
Wydruk około 0,97 €–1,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use brim for cartridge body + 3 walls. A fully 3D printed applicator for silicone, caulk, sealant, adhesives, and other standard cartridge-based materials. The tool is designed as an alternative to a classic caulking gun and uses a…
Wydruk około 9,40 €–11,49 € nettoWstępna wycena jednego wariantu
Revised to allow printing without overhang and minor geometry changes.
Mr. Lube is a tool for lubricating 8mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread). I’ve included a cap that seals the tool and has a male thread in the end to store the standard…
New version available ! I made a remix of this grease packer so it can be be used to quickly and easily apply PTFE grease to 8mm lead screws. Specifically fit to the Super Lube 21030 (3oz) tube so I can get it on the rear lead screw on my…
plunger rack for syringes for controlled dosages. A second ring above can be used to lock the plunger in place.
Needs only approx 2m of filament (6g). Suggest to print with 6 walls to avoid infill on the spatula. One STL file with tray and spatula, can be split into individual objects in slicer.
UPDATE 05/08/2025: added a variant for 11/12 speed chains (thanks @GrzegorzZ) UPDATE 28/07/2025: after further testing and reviews the model geometry was updated to avoid wicking lube to the sides This is an applicator for Squirt Chain…
Thanks for downloading in advance and please don't forget to like this modell!
The design uses 2x1 gridfinity tiles and has space for 2 dispensers side-by-side, so it can dispense both baseplate and bins magnets. Print settings: Printer: CRS-10 Pro Material: PLA Layer height: 0.2mm Nozzle diameter: 0.4 mm Infill:…
Use this to apply “phase-change” pads (PTM7950 and others) to your AM5 socket CPU. How to Place the Mask on top of the IHS Place your PTM pad Remove transparent protective film from the PTM pad Cut the pad with the Cutter Remove Cutter…
Epoxy mixer tray and applicator for one time use. Stackable for easy storage of larger quantities.
I made a remix of this grease injector and cap , so it can be printed faster . It's specific for the Super Lube 21030 (3oz) tube. So now the cap and the injector are shorter, so you save time and material. You have 3 profiles: 1 injector…
(V2 is available here: https://www.thingiverse.com/thing:6168143 ) Recently I saw a useful hand tool, to easily and quickly apply a masking tape. This guy has made this tool to be sure to apply the masking tape parallel to the edge.…
Attached is 25, 32, 40, 50 and 60 mm applicators for round bases. Attached is 60x35, 75x46, 90x52, 105x70 and 120x92mm applicators for oval bases. Also attached is the OpenSCAD file if you want to modify. Want another dimension? Alter the…
Hello everyone! I'm bad at modeling! I threw together yet another grease applicator, but this one has a 90 degree bend so there's no need to remove the bearings from the Y-carriage to reapply lubricant. For 8mm bearings, 3oz / 85g Super…
A quick stl to assist with the application of tube bandages to fingers or toes. When printing it you may need to brim the bottom and I used a custom support in the middle to help with the bridging of the top piece. Also worth checking it…
Description Never struggle to apply electrical tape to your spools again! So satisfying to use, too! Bambu Lab says never to use cardboard spools in your AMS due to the damage and inconvenience it can cause. But we all know some of the…
does not need supports nor a brim to print it.
This model was adapted for lepidlio ROKET CYANO GLUE GEL. It has a cap so you can leave it on the tube. No support is needed.
By request - a back scratcher that can be used to put medicine on your back. I hope this works for you!
Magnet Applicator for 3D Printer Description A simple magnet applicator to prevent putting magnets in up-side-down. Note: If you have an AMS you can use the raised surfaces to make the print multi-color. Materials Support me by using the…
The applicator helps you quickly and perfectly fit the sanding discs into the holes in the sander base. Using two adjustable pins, you can position the sanding paper correctly and without stress, ensuring maximum extraction power. The…
Draft design of the ring applicator
Design Concept I can't stand sunscreen lotion because of the mess it leaves on my hands. This alleviates that problem. It is design to screw directly onto the end of a 1 oz. (travel size) tube of sunscreen. It may not work on all brands,…
In one of our workshops we focus on exploring the effect of UV light on the DNA of the bacterium Escherichia coli and test the effectiveness of sunscreen ( https://www.uni.lu/life-en/scienteens-lab/workshops/biology/ ) We designed these…
Magnet applicator for both poles marked + and - . Dimensions are available from 4mm to 10mm for a depth of 2mm and 4mm to 15mm for depth of 3mm. If anyone would like deeper or larger just say I can adjust and share. The depth is measured…
Magnet Applicator for 3D Printer Description A simple magnet applicator to prevent putting magnets in up-side-down. Note: If you have an AMS you can use the raised surfaces to make the print multi-color. Materials Support me by using the…
Reupload from thingiverse: https://www.thingiverse.com/thing:5484218 What is this? It can help people with hand-tremor to apply nail polish more easily. I have very shaky hands and usually applying nail polish ends in a mess all over my…
Shoe Goo Applicator 26.6 ml. Cut the tip further down to adjust the bead size.
Shield applicator for Bungie's game Marathon. 4 STL Pieces: Main Handle (added small finger rest in back because Bungie did not make this very ergonomic) Also included a version without the finger rest in case you want it complete flat on…
I remixed RevHazlett famous lead screw greaser to accommodate my printers 10mm lead screws, instead of the regular 8mm, since I couldn't find one. this is designed to fit the superlube 21030 3oz squeeze bottle The cap is the same as the…
Mr. Lube V2 is a tool for lubricating 10mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread). NOTE: This for large 10mm screws!! Not the 8MM "Z" axis screws found on most 3d Printers…
Bike chain lube applicator cap that fits on a finish line lube container. this is based off of the design by trexlertechie and will work on wider chains than the original. the hole the lube comes out of is moved to the side and applies…
By request - a back scratcher that can be used to put medicine on your back. I hope this works for you!
Struggling with inserting these miniature magnets into your prints? Worry no more as from now on you will have full control over the little pesky things; including the orientation! Magnets used are 3mm diameter 2mm height:…
Draft design of an applicator sleeve with multiple channels
Multichannel applicator with split halves for central tandem
Inspiration and Design I bought a handheld static grass flocker and was severely disappointed by the results. I found a couple YouTube videos showing off a flock box and how to use it to create dozens of grass tufts quickly and easily. I…
A quick and dirty jig intended to help with applying TapTo stickers to NFC cards. Nothing revolutionary about this, it basically just helps hold the card and sticker in alignment a little better than just freestyling it on the table. All…
Lets you align the sanding disc with the base perfectly. You can also keep the applicator on the sander as a protector.
A tool to apply tape - with ease - to wrapping paper or boxes. An optional cutter (provided) can also be mounted, to cut the tape when done. However, this “cutter” more or less tears the tape, so if you want clean cuts you can always use…
Nozzle opening at the tip is 3mm. They are 25mm extensions. Work great. Just wipe tip clean before putting the cap back on. They are a snug fit to prevent leaking. If they get stuck, 13mm wrench makes quick work to get them off. I find…
From my sincere opinion this is the best applicator for sanding disks for 125mm and 8 holes orbital sander (Maktec, Makita, Bosch, etc…). I've already downloaded more models from here, but none of them were accurate enough. Therefore I've…
Protector against drying for silicone cartridge/cartouche and nozzle/applicator. Both protectors can clip together with 4x D6mm x 3mm magnets.
usage one rotation moves the plunger 7.5mm which is 0.5mℓ so you can suck or apply tiny amounts of liquid or paste - for fluids in microscopy/glue/silicone/solder paste/paint mixing/nail polish/grease/sugar icing or in molecular…
It's not pretty, but hopefully it can help someone else out in a pinch. I've also included the Fusion360 file. Instructions : 0.2mm PLA Add some support underneath the lid. See starbond-ca-nozzle.3mf , it might be overkill but gets the…
Magnet applicator for both poles marked + and - . Dimensions are available from 4mm to 10mm for a depth of 2mm and 4mm to 15mm for depth of 3mm. If anyone would like deeper or larger just say I can adjust and share. The depth is measured…
Adapter Riwall to Worx - foam applicator. High-pressure cleaner WORX WG633 E.9
Lost the applicator to the scrubbing bubbles fresh gel toilet bowl cleaner. Made a replacement. Supports required.
This tool simplifies the process of spreading lubricant when it is time to lubricate the smooth rods. No need to apply lubricant directly on the smooth rods. It is best to apply the lubricant on the tool first using a toothpick or…
Meat net applicator, no support needed, I recommend PETG becouse contact with food.
label applicator is made if you want to run around and stick labels on poles or on walls works well, still need improvements, alway can be better, its good for 3 stars but it does what is should. There is all parts you need for 50mm and…
Silicone sealant applicator designed to get clean corners when sealing sinks baths etc. Model in fusion 360 it has a 5mm, 10mm and 20mm curve. This has been test printed using polymaker PolyFlex™ TPU95 at 15% infill You can see the full…
Inserting small magnets into 3D prints can be frustrating – especially without proper tools. This compact Magnet Applicator is designed to make the process fast, safe, and aligned. Simply place a 6x2mm round magnet into the cup, insert…
Face cream applicator. Slightly modified AdrianRR 's great model. My wife loves it!
I saw a few magnet applicators here but, for my needs, seemed overly complicated for what they were. PRINT IN PLACE STL and STEP files included. I knocked this up in 5 minutes in FreeCAD. Each side accepts a 10mm x 3mm magnet. Make sure…
Replacement cap for the Fabric Spray Carry On .
This is my first version of a low-cost DIY static grass applicator designed for easy printability with minimal purchased parts. Ideal for building a model railway, small dioramas or tabletop terrain on a budget. The parts you need to buy…
I designed this flocking applicator for two main reasons: I needed one that was small, and I was learning a new CAD program. The only natural solution was to design something overly engineered and needlessly complicated where two…
Tape Applicator is for 36mm tape. This extender makes it work for smaller tape.
My kids like to complete those diamond art posters, but the applicator tip keeps breaking when they try to scoop up more of the sticky gel. This is a replacement tip that fits in into a 5mm diameter shaft used with the free applicator the…
No need to spend $100+ on a label applicator for your 5 oz glass woozy hot sauce bottles! With this simple tool, you can apply labels quickly, accurately, and consistently - without the high price tag. How It Works: Insert your bottle…
Project Description: I'm presenting a practical Spray Extender Applicator that I designed and created to facilitate work in paint shops, garages, and anywhere a spray can needs to be used in hard-to-reach or elevated areas. Whether for…
Small tray to hold Diaper Cream Applicator (Booty Brush). Print with painted on supports on the attachment side.
using measurements off the https://www.printables.com/model/970274-lego-flat-tile-1x1 model, + manual measurements off actually printed items, put together the following applicator. please note, it is 100% a rough 1st draft, and am 10000%…
This simple magnet applicator helps with positioning magnets on anything. The stick has a magnet glued to the tip, and when pressed down, will attract other magnets. Release the stick to release the magnet. I made one for each polarity.…
This is a 2x5x2 Gridfinity cutout organizer for 2 Fineline Brand 1.25oz Applicators. These applicators are available on Amazon and work with a variety of materials, including acrylics, ink, watercolors, oil paints, silk dyes, stains,…
Just extended the handle for this sponge brush. I need that for applying anti-limescale chemicals in the bathroom.
Reupload from thingiverse: https://www.thingiverse.com/thing:5484218 What is this? It can help people with hand-tremor to apply nail polish more easily. I have very shaky hands and usually applying nail polish ends in a mess all over my…
I loved Maxime's design, but I needed something with a smaller tip that would work adding magnets to some Legions Imperialis models, so I've tapered the tip to be 3mm. Just glue a 3x1mm magnet to the end of the stick. It still users the…
[EN] Stop fighting with magnets and messy glue! This tool is a game-changer for anyone who incorporates magnets into their 3D prints. It allows you to load a stack of magnets (e.g., 15 pieces of 4mm diameter) into a dedicated magazine and…
Remix to support square, and rectangular bases for Old World / WHFB. Included files are all the official square/rectangle base sizes for TOW. For circle bases, go see the original.
I am pleased to present an organizer for one bottle of tire tire polisher and an applicator for it. Also attach a version for 4 bottles.
simple glue application tool. small enough to consume the last bits of a filament at just under 1g per tool. very useful for spreading contact adhesive. The "teeth" will not be as sharp or pronounced once printed, this is intentional. It…
I had piles of 5" orbital sanding disks laying around. I saw someone made an organizer from wood and dowels but since wood is outrageously priced right now I decided to design and print my own version. Should hold a retail stack of 5"…
This is an applicator tip that you can use with 3M's Loctite Silicone Sealer tubes. I was using it as a replacement for the included tip, and to get a nice small bead for some crafts projects. You can increase the bead size by cutting off…
Shoe Goo Applicator 26.6 ml. Cut the tip further down to adjust the bead size.
Cable numbering rings with applicator tool This set contains cable labeling rings numbered from 1 to 30 . They slide over a cable to quickly identify wires. An applicator tool is included to make installing the rings easier. Useful for:…
Shield applicator for Bungie's game Marathon. 4 STL Pieces: Main Handle (added small finger rest in back because Bungie did not make this very ergonomic) Also included a version without the finger rest in case you want it complete flat on…
I needed to apply silicone to the joint of ceiling and wall. I used small syringe to do that. The syringe nose was not optimal length nor width. I created one. You print and just plug it in. For standard syringe heads. ~4mm+ inner…
I remixed RevHazlett famous lead screw greaser to accommodate my printers 10mm lead screws, instead of the regular 8mm, since I couldn't find one. this is designed to fit the superlube 21030 3oz squeeze bottle The cap is the same as the…
Mr. Lube V2 is a tool for lubricating 10mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread). NOTE: This for large 10mm screws!! Not the 8MM "Z" axis screws found on most 3d Printers…
Bike chain lube applicator cap that fits on a finish line lube container. this is based off of the design by trexlertechie and will work on wider chains than the original. the hole the lube comes out of is moved to the side and applies…
I made this because I was tired of mixing epoxy on scrap cardboard like some kind of medieval adhesive peasant. This is a small disposable mixing tray for epoxy, CA glue, wood glue, JB Weld, and other small-batch shop adhesives. The tray…
The hardest thing about having a scleral lens is holding your eye open with one hand and not spilling the saline in the lens as you insert it. There are a few commercially sold holders but they range from cheap things that were obviously…
These are parts to make a milky spore applicator using 2-inch schedule 40 PVC pipe. To assemble applicator as shown in photos, you will need: 2 - plug caps, one closes top in use, the other to close bottom for storage. 1 - dispenser…
This device helps you lubricate the end of your penis resulting in less waste and a quick, more uniform application. It works similarly to a gel deodorant dispenser. This allows you to apply lube without getting it all over your hands, or…
hook applicator for M4 countersunk head copied the idea from : Fischer Duopower EasyHook Angle
A simple contact lens insertion tool for the moments you get caught out. If you are FDM printing this, then be sensible - use it, and then throw it away - this is no substitute for a medical grade, injection moulded part - it is intended…
This is a simple body filler applicator, its quick to print and easy to use, perfect for when you need to fill in some small layer lines or holes in a model that's being prepped for painting. Its a simple push fit design to allow throw…
