Bike Chain Lube Applicator Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This applicator cap fits on a Finish Line chain lube container and helps to get the lube on the chain with less spillage
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Bike chain lube applicator cap that fits on a finish line lube container. this is based off of the design by trexlertechie and will work on wider chains than the original.
the hole the lube comes out of is moved to the side and applies the lube to the side linls of the chain. after applying to one side the bottle is turned around to apply to the other side.
I would recommend printing with the tip down with supports. This way the seal area that seals against the bottle is facing up.
I printed this with PLA.