1 / 1
LM8U/LM8UU 8mm Linear Bearing 90deg Super Lube 3oz Applicator
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another Super Lube grease applicator, but this one has a 90 degree bend. No need to remove bearings from Y-carriage.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 168
- Wydruki
- 6
- Wyświetlenia
- 2102
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 6) (Komentarze: 9)Remiksy (0)Kolekcje (65)Powiązane
Hello everyone! I'm bad at modeling!
I threw together yet another grease applicator, but this one has a 90 degree bend so there's no need to remove the bearings from the Y-carriage to reapply lubricant.
For 8mm bearings, 3oz / 85g Super Lube squeeze tube.
I manually created the threads based on measurements, but it should go on without marring the tube threads.
Prints fine at 0.2 layers, no supports.