Yard and Garden Applicator for Milky Spore and Other Products
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A yard and garden applicator for amendments like milky spore to replace flimsy cardboard versions.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are parts to make a milky spore applicator using 2-inch schedule 40 PVC pipe. To assemble applicator as shown in photos, you will need:
2 - plug caps, one closes top in use, the other to close bottom for storage.
1 - dispenser screen, after using the 4mm x 9-hole version shown in photos, I decided on the 4mm x 20-hole version since milky spore tends to clump like flour.
2 pieces of 2" sched 40 PVC pipe, one about 4 feet long, the other about 6"
1 - sched 40 2" PVC coupling which serves to secure the screen and, in conjunction with the 6" piece of pipe, keeps dirt and moisture from clogging the screen.
The larger 6mm x 20-hole screen is intended for coarser products like ant granules or spot fertilizer.
The lips of the parts that fit into the pipe have an outer diameter of 52mm to fit easily since ID tolerance of 2" PVC is about 0.3mm. To tighten, simply tap the pipes inner lip with a hammer. To loosen, a bit of light sanding. Or you can scale to your taste but that is more trouble than it's worth in this case.