“Mr. Lube V2” 10mm Z axis lubricant applicator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mr. Lube V2 is a tool for lubricating 10mm drive screws. It is designed to attach directly to a “Super Lube” 3oz tube
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Mr. Lube V2 is a tool for lubricating 10mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread).
NOTE: This for large 10mm screws!! Not the 8MM "Z" axis screws found on most 3d Printers
For 8mm "Z" axis screws see my original version “Mr. Lube” 8mm Z axis lubricant applicator .
I’ve included a cap that seals the tool and has a male thread in the end to store the standard “Super Lube” cap.

PLA
3 walls
15% gyroid infill
See screen shot of orientation on bed (no supports required)
Public Service Announcements:
Remember, whenever lubricating your rod, less is more “A little dab'll do ya”
It's designed to be held at 10° as shown in my 1st photo
Don't over torque the connection on the Super Lube tube. Snug is enough
Also See Skadis Mr. Lube Mount
Shameless Money Grab ;)
If you feel like it, you can support my hobby here
https://buymeacoffee.com/mke.dan