1 / 4
“Mr. Lube V2”     10mm Z axis lubricant applicator — image 1
1 / 4

“Mr. Lube V2” 10mm Z axis lubricant applicator

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mr. Lube V2 is a tool for lubricating 10mm drive screws. It is designed to attach directly to a “Super Lube” 3oz tube

Rating
0 / 5
Likes
1
Downloads
14
Makes
0
Views
77
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial

Mr. Lube V2 is a tool for lubricating 10mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread).

NOTE: This for large 10mm screws!!   Not the 8MM "Z" axis screws found on most 3d Printers
For 8mm "Z" axis screws see my original version “Mr. Lube” 8mm Z axis lubricant applicator .

 
I’ve included a cap that seals the tool and has a male thread in the end to store the standard “Super Lube” cap. 

  • PLA

  • 3 walls

  • 15% gyroid infill

  • See screen shot of orientation on bed (no supports required)

Public Service Announcements:

  • Remember, whenever lubricating your rod, less is more  “A little dab'll do ya”

  • It's designed to be held at 10° as shown in my 1st photo

  • Don't over torque the connection on the Super Lube tube.  Snug is enough

Also See Skadis Mr. Lube Mount

Shameless Money Grab  ;)
If you feel like it, you can support my hobby here
https://buymeacoffee.com/mke.dan

Tags