1 / 7
“Mr. Lube V1” 8mm Z axis lubricant applicator .
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mr. Lube is a tool for lubricating 8mm “Z” axis drive screws.
- Ocena
- 5 / 5
- Polubienia
- 523
- Pobrania
- 1043
- Wydruki
- 9
- Wyświetlenia
- 6032
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 9) (Komentarze: 12)Remiksy (1)Kolekcje (742)Powiązane
Mr. Lube is a tool for lubricating 8mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread).
I’ve included a cap that seals the tool and has a male thread in the end to store the standard “Super Lube” cap.

- PLA
- 3 walls
- 15% gyroid infill
- See screen shot of orientation on bed (no supports required)
Public Service Announcements:
- Remember, whenever lubricating your rod, less is more “A little dab'll do ya”
- It's designed to be held at 10° as shown in my 1st photo
- Don't over torque the connection on the Super Lube tube. Snug is enough
Also See Skadis Mr. Lube Mount
Shameless Money Grab ;)
If you feel like it, you can support my hobby here
https://buymeacoffee.com/mke.dan