8mm Lead Screw Grease Applicator – Super Lube 21030 (85g/3oz PTFE Grease)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Lead Screw Rods Grease Adaptor for the Superlube 21030 PTFE Tube (PTFE Grease) CAPS added !
- Ocena
- 5 / 5
- Polubienia
- 468
- Pobrania
- 1541
- Wydruki
- 22
- Wyświetlenia
- 6554
- Oceny
- 16
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
8mm Lead Screw Grease Applicator for Super Lube 21030
A practical grease applicator for lubricating 8mm lead screws directly from a Super Lube 21030 tube (85g / 3oz PTFE grease).
The adapter screws onto the grease tube and allows you to apply grease directly to the lead screw. A longer version provides extra reach for the rear lead screw on Bambu Lab printers.
Easy to print — no supports required!
Compatibility
Grease tube: Super Lube 21030, 85g / 3oz.
Lead screws: 8mm outside diameter.
Check your printer’s maintenance instructions to confirm which components require grease and which lubricant to use.
Available versions
V2.0 — Standard: the original grease applicator.
V2.1 — Extended: the same applicator with 20mm of extra length to reach the rear lead screw on Bambu Lab printers.
Two caps are also included in the model files.
Printing instructions
Supports: not required.
Orientation: print with the threaded tube connection facing down and the grease outlet facing up.
How to use
Clean the lead screw to remove old grease and dirt.
Screw the adapter onto your Super Lube 21030 tube.
Position the applicator against the lead screw.
Gently squeeze the tube to apply grease, following your printer manufacturer’s maintenance instructions.
For cleaning before lubrication, you can use the Rod Sloth:
https://www.printables.com/model/605305-rod-sloth-fits-most-3d-printers
Related accessory
My Super Lube 21030 Accessory Cap is available here:
https://www.printables.com/model/845730-superlube-21030-accessory-cap
Update history
7 May 2024: added V2.1, with 20mm of extra length to reach the rear lead screw on Bambu Lab printers.
14 April 2024: added two caps.
If you find this model useful, please leave a like and share a photo of your print in the Makes section. Your feedback and compatibility reports are welcome!